Hardware Rebuild Utilization exceeds 100%

[xilinx]

Hardware Rebuild Utilization exceeds 100%

[toannv123]

I have the same problem

ERROR: [Place 30-640] Place Check : This design requires more Slice LUTs cells than are available in the target device. This design requires 59705 of such cell types but only 53200 compatible sites are available in the target device. Please analyze your synthesis results and constraints to ensure the design is mapped to Xilinx primitives as expected. If so, please consider targeting a larger device. Please set tcl parameter "drc.disableLUTOverUtilError" to 1 to change this error to warning.

[toannv123]

I found that the problem for W1A2 ultra96 has been fixed.

However, it is still FAILED for pynqZ1-Z2.

Could you help me check it? Thank you so much.

%%%%%%%%%%%%%%%%
Phase 1.2 IO Placement/ Clock Placement/ Build Placer Device
ERROR: [Place 30-640] Place Check : This design requires more Slice LUTs cells than are available in the target device. This design requires 59705 of such cell types but only 53200 compatible sites are available in the target device. Please analyze your synthesis results and constraints to ensure the design is mapped to Xilinx primitives as expected. If so, please consider targeting a larger device. Please set tcl parameter "drc.disableLUTOverUtilError" to 1 to change this error to warning.
ERROR: [Place 30-640] Place Check : This design requires more LUT as Memory cells than are available in the target device. This design requires 31215 of such cell types but only 17400 compatible sites are available in the target device. Please analyze your synthesis results and constraints to ensure the design is mapped to Xilinx primitives as expected. If so, please consider targeting a larger device. Please set tcl parameter "drc.disableLUTOverUtilError" to 1 to change this error to warning.
ERROR: [Place 30-640] Place Check : This design requires more LUT as Distributed RAM cells than are available in the target device. This design requires 29892 of such cell types but only 17400 compatible sites are available in the target device. Please analyze your synthesis results and constraints to ensure the design is mapped to Xilinx primitives as expected. If so, please consider targeting a larger device. Please set tcl parameter "drc.disableLUTOverUtilError" to 1 to change this error to warning.
ERROR: [Place 30-640] Place Check : This design requires more RAMS64E cells than are available in the target device. This design requires 19968 of such cell types but only 17400 compatible sites are available in the target device. Please analyze your synthesis results and constraints to ensure the design is mapped to Xilinx primitives as expected. If so, please consider targeting a larger device.
INFO: [Timing 38-35] Done setting XDC timing constraints.
Phase 1.2 IO Placement/ Clock Placement/ Build Placer Device | Checksum: dfeb4d7c

[giuliogamba]

Which version of Vivado are you using? The hardware build has been tested with 2017.4

[toannv123]

I used Vivado version 2018.3.

I remember that the hardware was built successfully with vivado 2018.3 and the following source code:

commit b41cf6e
Author: Giulio [email protected]
Date: Mon Oct 22 13:57:11 2018 +0100

[toannv123]

For more information, utilization of hardware resource is estimated by Vivado 2018.3 as follows (142%):

== Utilization Estimates

• Summary:
  +-----------------+---------+-------+--------+-------+
  | Name | BRAM_18K| DSP48E| FF | LUT |
  +-----------------+---------+-------+--------+-------+
  |DSP | -| -| -| -|
  |Expression | -| -| 0| 32|
  |FIFO | -| -| -| -|
  |Instance | 214| 58| 33349| 73006|
  |Memory | 256| -| 4096| 384|
  |Multiplexer | -| -| -| 2427|
  |Register | -| -| 513| -|
  +-----------------+---------+-------+--------+-------+
  |Total | 470| 58| 37958| 75849|
  +-----------------+---------+-------+--------+-------+
  |Available | 280| 220| 106400| 53200|
  +-----------------+---------+-------+--------+-------+
  |Utilization (%) | 167| 26| 35| 142|
  +-----------------+---------+-------+--------+-------+

[dustinjoe]

thank you for reply
I redownload this repo and try again and here is the case for W1A2 for ultra96:

INFO: [Common 17-206] Exiting vivado_hls at Tue Sep 10 14:11:37 2019...
== Utilization Estimates

• Summary:
  +-----------------+---------+-------+--------+-------+-----+
  | Name | BRAM_18K| DSP48E| FF | LUT | URAM|
  +-----------------+---------+-------+--------+-------+-----+
  |DSP | -| -| -| -| -|
  |Expression | -| -| 0| 34| -|
  |FIFO | -| -| -| -| -|
  |Instance | 214| 56| 30680| 70379| -|
  |Memory | 256| -| 4096| 384| -|
  |Multiplexer | -| -| -| 2427| -|
  |Register | -| -| 513| -| -|
  +-----------------+---------+-------+--------+-------+-----+
  |Total | 470| 56| 35289| 73224| 0|
  +-----------------+---------+-------+--------+-------+-----+
  |Available | 432| 360| 141120| 70560| 0|
  +-----------------+---------+-------+--------+-------+-----+
  |Utilization (%) | 108| 15| 25| 103| 0|
  +-----------------+---------+-------+--------+-------+-----+

I will try on 2017.4 later to give update

[giuliogamba]

Please use 2017.4, which has been used to generate the bitstreams in this repo.
Please note that you're also using the Vivado HLS estimates to draw conclusions, but those HLS reports are indeed estimates, so not 100% accurate.