PWM not working on pin 6 and 11

[xvman]

PWM not working on pin 6 and 11

[GoogleCodeExporter]

The same happens to me, i'm trying to use pin 11 (timer2) on arduino uno R3) 
and it's not working, on pin3 (that is on timer2 too) works fine

Original comment by [email protected] on 21 Jun 2013 at 7:23

[GoogleCodeExporter]

One more information, the return value of SetPinFrequencySafe on pin 11 will be 
set on false, on pin 3 result return true (and on this one it works fine)

Original comment by [email protected] on 24 Jun 2013 at 9:41

[GoogleCodeExporter]

Dear all,

I have the same problem like you guys. I would like to set the frequency of the 
pwm of pin11, but the library seems not to work.
Have you allready found a solution to this problem?

Hope to hear from you. Thanks in advance!

Kind regards,

Jeroen Zegers

Original comment by [email protected] on 31 Jan 2014 at 6:28

[GoogleCodeExporter]

^ what i have found after reading enough material that when you use this 
library (commands of setpinfrequency etc) you have to sacrifice 1 or 2 pwm 
ports so thats why you are not getting output on the said pins.
source:http://forum.arduino.cc/index.php?topic=117425.0

Original comment by [email protected] on 20 Feb 2014 at 9:47