Compile the package using the SDK

[yichya]

Compile the package using the SDK

[yichya]

clone this repository under package/extra (mkdir -p if you don't have that) and you should see luci-app-xray under "Extra packages" submenu

[yichya]

seems the sdk you are using comes with a old version of go while xray requires go1.15+ to compile. this problem is a little bit hard to solve because you have to download prebuilt xray binaries...

[yichya]

i'll look into this later, maybe remove the process of building xray and just depend on openwrt-xray instead (so you can download ipks there to install xray and still use this luci app for configurations)

[M33FT]

Thanks for the feedback, yes I did, but when compiling I use the following command:

make package/luci-app-xray/compile V=99

Gives me the following error.

make[2]: *** [Makefile:137: /home/m33ft/openwrt-sdk-19.07.6-brcm2708-bcm2710_gcc-7.5.0_musl.Linux-x86_64/build_dir/target-aarch64_cortex-a53_musl/luci-app-xray-7da97635b28bfa7296fe79bbe7cd804a684317d9/.built] Error 2
make[2]: Leaving directory '/home/m33ft/openwrt-sdk-19.07.6-brcm2708-bcm2710_gcc-7.5.0_musl.Linux-x86_64/package/extra/luci-app-xray'
time: package/extra/luci-app-xray/compile#0.49#0.29#0.58
make[1]: *** [package/Makefile:113: package/extra/luci-app-xray/compile] Error 2
make[1]: Leaving directory '/home/m33ft/openwrt-sdk-19.07.6-brcm2708-bcm2710_gcc-7.5.0_musl.Linux-x86_64'
make: *** [/home/m33ft/openwrt-sdk-19.07.6-brcm2708-bcm2710_gcc-7.5.0_musl.Linux-x86_64/include/toplevel.mk:220: package/extra/luci-app-xray/compile] Error 2

Is there something I did not do?

Thanks for guiding me

[M33FT]

Yes. It would be great to be able to compile the package more easily in the future.
Anyway, I'm using the latest official version of the openwrt SDK and I'm having this problem.
But now that I tested with the Snapshot version, I was able to compile it.

Thanks