yuzi-co/forager

Advanced multi-algo profit switching miner

forager's Issues

Scrypt Miner

Hard to believe but lately Zergpool has Scrypt as top paying algo.
Please add a AMD and a NV Scrypt miner.

Watt 0W

Привет.
У меня на Radeon RX 580 значение Watt всегда 0W. В (C)urrent Power тоже 0W. Проблема появилась где-то полтора-два месяца назад.
Включение Afterburner не помогло.
Load, Temp, Fan, Clock и ClkMem значения показывают.

Stratum connect timeout, failover...

Привет.
Можешь добавить возможность временного отключения добычи при сообщениях " Stratum connect timeout, failover..."?
Например, сегодня в 11:40 пул Nicehash при использовании алгоритма Lyra2z в N-Coolminer выдавал такую ошибку во время бенчмарка. Из-за этого бенчмарк не проходил дальше.
Пришлось закомментировать использование этого алгоритма в N-Coolminer.
В Config.ini выставление параметра WatchdogHashrate = 40 не помогло. У меня WatchdogExcludeAlgos = X16r.

Incorrect SHA in A-SgminerKL-1.0.5.json

Correct SHA256: 693688D6870810CC5AFF9B65699955DA14F6AD7AA7D4BD321950C878D16DCC5A

Suggestion - Add runtime timer to windows console

Hello,

Thank you for this great miner, can I suggest if possible to add runtime into the title bar, this feature is already implemented in Nemosminer. hopefully its easy to add.

I tried to added myself but just keep breaking the script.

https://github.com/nemosminer/NemosMiner/blob/master/Core-v3.1.ps1

Lines 24 and 101

Thanks

"No such host is known" error mining cryptonightv7 on MPH

Hello

I have an error "No such host is known" mining cryptonightv7 on MPH with excavator1.5.4a:

[12:13:39][0x00000108][info] Log started
[12:13:40][0x00000108][info] core | Found CUDA device: GeForce GTX 1060 6GB
[12:13:40][0x00000108][info] api | Listening on 127.0.0.1:4068
[12:13:40][0x00000108][info] core | Initialized!
[12:13:40][0x00000108][info] nhmp | Disconnected
[12:13:40][0x00000108][warning] nhmp | resolve: No such host is known (11001)
[12:13:42][0x0000115c][info] wrkr0-0 | Algorithm: CUDA-cryptonightV7 parameters: B=20,TPB=32
[12:13:50][0x000013e8][info] core | Device #0-0 speed: 0.000000 H/s (cryptonightV7)
[12:13:50][0x000013e8][info] core | Algorithm 'cryptonightV7' speed: 0.000000 H/s
[12:13:50][0x00000108][info] nhmp | Disconnected

The generated config file for excavator is this:

[
	{"time":0,"commands":[
		{"id":1,"method":"subscribe","params":["nhmp.cryptonight-hub.nicehash.com:3200","XXXXX.b250m_NVIDIA:x"]}
	]},
	{"time":1,"commands":[
		{"id":1,"method":"algorithm.add","params":["cryptonightV7"]}
    ]},
	{"time":2,"commands":[

		{"id":1,"method":"worker.add","params":["cryptonightV7","0"]}
	]},
	{"time":10,"loop":10,"commands":[
		{"id":1,"method":"worker.print.speed","params":["0"]},
		{"id":1,"method":"algorithm.print.speeds","params":[]}
	]}
]

No Pools...

I have a problem since version 1.4:
with more than one selected pool I get error message "No Pools ....", with only a select pool it works correctly.
Win 10 , NVIDIA 1080,1060, clean Install, clean config.ini

add more amd cards tdp

todo list for myself

• more amd cards tdp

Error on N-lolMinerZero-0.37

The following miner gives an error on my machines (I deleted the BTC address):
Forager\Bin\N-lolMinerZero-0.37\lolMiner-zero.exe --server equihash192.mine.zergpool.com --port 2144 --user MY_BTC_ADDRESS --pass c=BTC,ID=DESK-8OS_NVIDIA --platform 0 --device 0,1,2,3,4,5 --use-compact-short-stat

It gives: Number of hosts (1) does not match number of worker passwords (2)

Keep up the good work!

Warn Failed to get Forager updates.

From Log: happening on all my rigs, with latest version.

Warn Failed to get Forager updates.

3 issues in 1 Log file?

Also see attached Log-file...
2018-04-30_21-31-43.txt

Issue 1: ###### ERROR ##### Could not find a part of the path

Issue 2: ClayDual 11.7 detects my GPU's as 'GeForce GTX 1060 3GB', then mentions 'All GPUs are 2GB, miner is completely free in this case, developer fee will not be mined at all', followed by 'too high epoch number for 3GB card in Windows 10' and halts. This may not be related to MM though... just think it's strange that it's sometimes reported as a 2GB version... Probably need to reach out to Claymore for this?

Issue 3: MM then considers all my miners as not OK due to: 'skipped due to constraints'), then exits with message: 'Miners/Pools combinations detected: 0' & 'NO MINERS!'

Question: It is possible to disable power monitoring ?

Question: It is possible to disable power monitoring ?

If so how you do it, if not can you implement this "feature" ?

Background, for some reason in my systems (nvidia 1070ti, 1060, 1050ti) the constant polling of nvdia-smi running causes a lot of inestability. for example when I use ccminer 2.30 with hmq1725 by itself all cards are stable for as long I let them run, if I close the miner and start forager same algo and miner causes random GPU crashes.

AutoStartAhash.bat does not work

Hello,

I wanted to give your fork a go, downloaded latest master and AutoStartAhash.bat does not work

Using Start.bat and selecting Automatic -> Ahashpool works just fine.

Thanks

CryptoDredge 0.6 unsave the hashrate

0.6 is more stable than 0.7 but unsave the hashrate file.

Disable exit when "NO MINERS"

Предлагаю в строке 756 файла Core.ps1 убрать "; Exit".
Когда пропадает надолго интернет, а потом появляется, то приходится перезапускать Forager.
In English:
I suggest deleting "; Exit" in line 756 of the Core.ps1 file.
When the Internet disappears for a long time, and the bottom appears, you have to restart Forager.

Column Watt is a percentage with AB enabled, not real wattage?

When Afterburner = Enabled (in config), the value under Watt is the % and not the real value.

Example below are for a 1080Ti (250W TDP):

Result of Afterburner.bat:

Signature     : 1296123981
Version       : 131072
HeaderSize    : 32
EntryCount    : 44
EntrySize     : 1324
Time          : 1529399622
GpuEntryCount : 1
GpuEntrySize  : 1304




SrcName          SrcUnits LocalizedSrcName LocalizedSrcUnits RecommendedFormat     Data MinLimit MaxLimit Flags        GPU
-------          -------- ---------------- ----------------- -----------------     ---- -------- -------- -----        ---
GPU temperature  °C       GPU temperature  °C                %.0f                    63        0      100  None          0
GPU usage        %        GPU usage        %                 %.0f                    99        0      100  None          0
FB usage         %        FB usage         %                 %.0f                    75        0      100  None          0
VID usage        %        VID usage        %                 %.0f                     0        0      100  None          0
BUS usage        %        BUS usage        %                 %.0f                     0        0      100  None          0
Memory usage     MB       Memory usage     MB                %.0f              2016.121        0     8192  None          0
Core clock       MHz      Core clock       MHz               %.0f                  1898        0     2500  None          0
Memory clock     MHz      Memory clock     MHz               %.0f                  5508        0     7500  None          0
Power            %        Power            %                 %.0f                    99        0      150  None          0
Fan speed        %        Fan speed        %                 %.0f                    86        0      100  None          0
Fan tachometer   RPM      Fan tachometer   RPM               %.0f                  2433        0    10000  None          0
Temp limit                Temp limit                         %.0f                     0        0        1  None          0
Power limit               Power limit                        %.0f                     1        0        1  None          0
Voltage limit             Voltage limit                      %.0f                     0        0        1  None          0
No load limit             No load limit                      %.0f                     0        0        1  None          0
CPU1 temperature °C       CPU1 temperature °C                %.0f                42.875        0      100  None          0
CPU1 usage       %        CPU1 usage       %                 %.0f                   100        0      100  None          0
CPU2 usage       %        CPU2 usage       %                 %.0f                28.125        0      100  None          1
CPU3 usage       %        CPU3 usage       %                 %.0f                   100        0      100  None          2
CPU4 usage       %        CPU4 usage       %                 %.0f               48.4375        0      100  None          3
CPU5 usage       %        CPU5 usage       %                 %.0f                   100        0      100  None          4
CPU6 usage       %        CPU6 usage       %                 %.0f               39.0625        0      100  None          5
CPU7 usage       %        CPU7 usage       %                 %.0f                   100        0      100  None          6
CPU8 usage       %        CPU8 usage       %                 %.0f                  37.5        0      100  None          7
CPU9 usage       %        CPU9 usage       %                 %.0f                   100        0      100  None          8
CPU10 usage      %        CPU10 usage      %                 %.0f               17.1875        0      100  None          9
CPU11 usage      %        CPU11 usage      %                 %.0f                   100        0      100  None         10
CPU12 usage      %        CPU12 usage      %                 %.0f                 31.25        0      100  None         11
CPU usage        %        CPU usage        %                 %.0f              66.79688        0      100  None 4294967295
CPU1 clock       MHz      CPU1 clock       MHz               %.0f                  3400        0     5000  None          0
CPU2 clock       MHz      CPU2 clock       MHz               %.0f                  3400        0     5000  None          1
CPU3 clock       MHz      CPU3 clock       MHz               %.0f                  3400        0     5000  None          2
CPU4 clock       MHz      CPU4 clock       MHz               %.0f                  3400        0     5000  None          3
CPU5 clock       MHz      CPU5 clock       MHz               %.0f                  3400        0     5000  None          4
CPU6 clock       MHz      CPU6 clock       MHz               %.0f                  3400        0     5000  None          5
CPU7 clock       MHz      CPU7 clock       MHz               %.0f                  3400        0     5000  None          6
CPU8 clock       MHz      CPU8 clock       MHz               %.0f                  3400        0     5000  None          7
CPU9 clock       MHz      CPU9 clock       MHz               %.0f                  3400        0     5000  None          8
CPU10 clock      MHz      CPU10 clock      MHz               %.0f                  3400        0     5000  None          9
CPU11 clock      MHz      CPU11 clock      MHz               %.0f                  3400        0     5000  None         10
CPU12 clock      MHz      CPU12 clock      MHz               %.0f                  3400        0     5000  None         11
CPU clock        MHz      CPU clock        MHz               %.0f                  3400        0     5000  None 4294967295
RAM usage        MB       RAM usage        MB                %.0f                  5111        0    16384  None          0
Pagefile usage   MB       Pagefile usage   MB                %.0f                 10865        0    16384  None          0




GpuId     : VEN_10DE&DEV_1B06&SUBSYS_374D1458&REV_A1&BUS_9&DEV_0&FN_0
Family    : GP102-A
Device    : GeForce GTX 1080 Ti
Driver    : 398.11
BIOS      : 86.02.39.00.9d
MemAmount : 0
Index     : 0

When commenting out the 'Afterburner = Enabled' line in Config, the real Wattage is shown:

N-lolminer42 does not provide any benchmark data on MPH

Move failing Miner to 'Failed' (Enhancement)

It's unclear at the moment to see which miners failed. After restarting, failed miners may retry benchmark. This results both in lost time and uncertainity.

Why not moving miners -when failed multiple times- to a subfolder called 'Failed'? Then it's still up to me to decide if I want to retry them (cfr. put them back in the 'Miners' folder), maybe with different settings?

As a complication to this: miner files contain multiple algo's, some of them may fail while others work fine. This potentially could be solved by moving only the failed algo's to the 'Failed' sub folder... however this may complicate things too much for now.

To workaround that, you could start with single-algo miners (cfr. when they fail, move them to the 'Failed' folder).

Enabling different miners on different GPUs.

Some of the miners work great on my 1080Ti, but they fail on the 750Ti. It would be great if I could assign different miners to different cards, just like you do with AMD-NVIDIA-CPU. My temporary solution is simply to have two copies of the miners, one for CPU+750Ti and one for 1080Ti, but that's a waste of space and resources. Would it be possible to do something like that? If you don't wanna do it, do you at least have some ideas?

M7M (CPU): profit too high

Hash-rate is correct though...

Issue occured some hours ago, after retrieving latest codebase

Only seems to be an issue for NVIDIA-rigs. Miner seemed to work fine before fetching… Will try the 1.7 release (without the commits later on).

Unhandled Exception: System.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
at OpenCl.NativeMethods.clGetPlatformIDs(UInt32 numEntries, IntPtr[] platforms, UInt32& numPlatforms)
at OpenCl.Platform.GetPlatformIDs()
at CallSite.Target(Closure , CallSite , Type )
at System.Dynamic.UpdateDelegates.UpdateAndExecute1[T0,TRet](CallSite site, T0 arg0)
at System.Management.Automation.Interpreter.DynamicInstruction2.Run(InterpretedFrame frame) at System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame frame) at System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame frame) at System.Management.Automation.Interpreter.Interpreter.Run(InterpretedFrame frame) at System.Management.Automation.Interpreter.LightLambda.RunVoid1[T0](T0 arg0) at System.Management.Automation.PSScriptCmdlet.RunClause(Action1 clause, Object dollarUnderbar, Object inputToProcess)
at System.Management.Automation.PSScriptCmdlet.DoEndProcessing()
at System.Management.Automation.CommandProcessorBase.Complete()
at System.Management.Automation.CommandProcessorBase.DoComplete()
at System.Management.Automation.Internal.PipelineProcessor.DoCompleteCore(CommandProcessorBase commandRequestingUpstreamCommandsToStop)
at System.Management.Automation.Internal.PipelineProcessor.SynchronousExecuteEnumerate(Object input)
at System.Management.Automation.PipelineOps.InvokePipeline(Object input, Boolean ignoreInput, CommandParameterInternal[][] pipeElements, CommandBaseAst[] pipeElementAsts, CommandRedirection[][] commandRedirections, FunctionContext funcContext)
at System.Management.Automation.Interpreter.ActionCallInstruction6.Run(InterpretedFrame frame) at System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame frame) at System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame frame) at System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame frame) at System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame frame) at System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame frame) at System.Management.Automation.Interpreter.Interpreter.Run(InterpretedFrame frame) at System.Management.Automation.Interpreter.LightLambda.RunVoid1[T0](T0 arg0) at System.Management.Automation.PSScriptCmdlet.RunClause(Action1 clause, Object dollarUnderbar, Object inputToProcess)
at System.Management.Automation.PSScriptCmdlet.DoEndProcessing()
at System.Management.Automation.CommandProcessorBase.Complete()
at System.Management.Automation.CommandProcessorBase.DoComplete()
at System.Management.Automation.Internal.PipelineProcessor.DoCompleteCore(CommandProcessorBase commandRequestingUpstreamCommandsToStop)
at System.Management.Automation.Internal.PipelineProcessor.SynchronousExecuteEnumerate(Object input)
at System.Management.Automation.PipelineOps.InvokePipeline(Object input, Boolean ignoreInput, CommandParameterInternal[][] pipeElements, CommandBaseAst[] pipeElementAsts, CommandRedirection[][] commandRedirections, FunctionContext funcContext)
at System.Management.Automation.Interpreter.ActionCallInstruction6.Run(InterpretedFrame frame) at System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame frame) at System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame frame) at System.Management.Automation.Interpreter.Interpreter.Run(InterpretedFrame frame) at System.Management.Automation.Interpreter.LightLambda.RunVoid1[T0](T0 arg0) at System.Management.Automation.DlrScriptCommandProcessor.RunClause(Action1 clause, Object dollarUnderbar, Object inputToProcess)
at System.Management.Automation.DlrScriptCommandProcessor.Complete()
at System.Management.Automation.CommandProcessorBase.DoComplete()
at System.Management.Automation.Internal.PipelineProcessor.DoCompleteCore(CommandProcessorBase commandRequestingUpstreamCommandsToStop)
at System.Management.Automation.Internal.PipelineProcessor.SynchronousExecuteEnumerate(Object input)
at System.Management.Automation.Runspaces.LocalPipeline.InvokeHelper()
at System.Management.Automation.Runspaces.LocalPipeline.InvokeThreadProc()
at System.Management.Automation.Runspaces.PipelineThread.WorkerProc()
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ThreadHelper.ThreadStart()
Press any key to continue . . .

Set-Content: can not find path to...

Set-Content : Could not find a part of the path '\Cache\https%3a%2f%2fauroracoin-qubit.miningpoolhub.com%2findex.php%3fpage%3dapi%26action%3dgetdashboarddata%26api_key%3db9eec144304040a8da1bb4b3e4
b8608024ad509e98a61c96207d89543bf09cfe%26id%3d%262018-05-13_20-13.json'.n'.
At \Include.ps1:643 char:85

• ... $Response | ConvertTo-Json -Depth 100 | Set-Content -Path $CacheFile}

•                                         ~~~~~~~~~~~~~~~~~~~~~~~~~~~~    
  

• CategoryInfo : ObjectNotFound: (...5-13_20-13.json:String) [Set-Content], DirectoryNotFoundException------ ---- ----
  • FullyQualifiedErrorId : GetContentWriterDirectoryNotFoundError,Microsoft.PowerShell.Commands.SetContentCommand

PowerDefaultLimit does not work

This line does not work on my machines because the casting to System.int32 does not work:
$PowerDefaultLimit = [int](((& $Command $Arguments) -replace 'W').Trim())

It resides in the include.ps1

MSI Afterburner support + AMD Powerlimits

MSI Afterburner support progress

• Initial MSI Afterburner support
• Monitoring for AMD
• Monitoring for single CPU
• Monitoring data for NVIDIA (Using nvidia-smi for now)
• GpuGroup with Powerlimit support for AMD (Single Group is supported)
• GpuGroup with Powerlimit support for NVIDIA (Using nvidia-smi for now)
• Multiple GpuGroups with Afterburner
• Mixed AMD/NVIDIA Rigs

I need output from AfterburnerResult.bat from Multi GPU rigs, Mixed AMD/NVIDIA rigs and multi CPU rigs. Please post here so I can add support

Please use last official version from https://www.msi.com/page/afterburner (4.5.0 or newer)

MyPools

Tell me, please, about MyPools.ps. What is it?

Miner speed 1000x higher than it is.

Hey man, I love your fork and I've been using it as a basis for my own version. The thing is, several miner-algo combinations seem to report kh/s instead of h/s and I can't seem to find the relevant code. Do you know what might be causing such issues?

UtilizationMem division by zero

Include.ps1 at line 237:

UtilizationMem = [int]($($CardData | Where-Object SrcName -match "^(GPU\d* )?memory usage").Data / $($CardData | Where-Object SrcName -match "^(GPU\d* )?memory usage").MaxLimit * 100)

This often results in division by zero. I managed to fix it by changing it to
UtilizationMem = [float]($($CardData | Where-Object SrcName -match "^(GPU\d* )?memory usage").Data / [float]$($CardData | Where-Object SrcName -match "^(GPU\d* )?memory usage").MaxLimit * 100 + 0.001),

but surely there must be a better way.

Out of memory errors...

I keep getting these messages with the newest version and nothing works. Afterburner on or off, ETHlargementPill on or off, it doesn't matter. The entire system freezes. Tell me if you need more info.

Running startup script threw an error: Exception of type 'System.OutOfMemoryException' was thrown..
+ CategoryInfo : OpenError: (localhost:String) [], RemoteException
+ FullyQualifiedErrorId : PSSessionStateBroken

[localhost] The background process reported an error with the following message: W i n d o w s P o w e r S h e l l t e r m i n a t e d w i t h t h e f o l l o w i n g
e r r o r : .
+ CategoryInfo : OpenError: (localhost:String) [], PSRemotingTransportException
+ FullyQualifiedErrorId : 2100,PSSessionStateBroken

Excavator won't mine CryptoNightV7

It seems like nhmp.eu.nicehash.com server doesn't recognize Cryptonightv7 as a valid algorithm. Here's the detailed log from Excavator-1.5.4a:
log

Latest version error dl file

Downloading https://github.com/CryptoGraphics/lyclMiner/releases/download/untagged-95777e4326ae4e5ccdb5/lyclMiner015.zip
WARNING: File hash doesn't match. Removing file.

Update z-enemy 1.14 Nvidia and Faster Raven x16r/x16s Spmod-git #5 fork of ccminer

https://github.com/sp-hash/suprminer/releases

Thx for the awesome work!

X16r All rejects

DL'd latest version and now all my x16r is rejected. Multiple miners. Multiple rigs.
On BOTH rigs I can fire up Avermore outside of your app and it mines fine.
I even tried copying over working miner to your folder. No good.
Something else is happening I cant figure out what.
My other rigs are on slightly older versions of Forager and all are running x16r with no issues.
The only error in the log is this
"Downloading https://github.com/CryptoGraphics/lyclMiner/releases/download/untagged-95777e4326ae4e5ccdb5/lyclMiner015.zip
15:59:20.24 Warn Existing file hash doesn't match. Will re-download.
15:59:21.20 Warn File hash doesn't match. Removing file."

I thought that got fixed? Anyways I also get rejects on SgminerKL-1.0.5 x16r

Strange stuff lol. Any ideas?
While I wait for feedback I am copying over a working copy of Forager from another rig and test that out.

N-CcminerTpruvot-2.2.5

N-CcminerTpruvot-2.2.5 not support algo X16s

N-lolminer-43 Application Has Been Blocked From Accessing Graphics Hardware

The above miner gives me "Application Has Been Blocked From Accessing Graphics Hardware"
Every other miner works without any problems ... any thoughts?

Asking for MS Visual C++ On every download

Couldnt find anything logged so heres a screenshot
On startup and on EVERY download of every miner I have to do this.
Endless....
https://ibb.co/gE0ZFT

Amd Api, cant detect hashrate

Some of miner works perfect, but it cant detect any hash rate, it runs forever the benchmark

Inconsistent format: fiat/day

In the screenshot below, the field called 'EUR/Day' is not formatted consistently with the 'Profit/Day'. 5 digits after the comma is not needed. ;-)

Also, It si not in line with the format uner the GroupName:

Suggestion for a fix in Get_Mining_Types()

I didn't want to do a pull request, because I'm not exactly sure what's going on, but in Include.ps1, line 436 says:

$OCLDevices = @($OCLPlatforms | ForEach-Object { [OpenCl.Device]::GetDeviceIDs($_, "GPU") })

However, in my system $OCLPlatforms[1] is an Intel CPU and OpenCL throws an error because the second parameter is hardcoded as "GPU". This is what I did to make it work:

$OCLDevices = @($OCLPlatforms | ForEach-Object { if($_.Vendor -like '*NVIDIA*' -or $_.vendor -like '*Advanced Micro Devices*'){ [OpenCl.Device]::GetDeviceIDs($_, "GPU") } else{[OpenCl.Device]::GetDeviceIDs($_, "CPU")} })

No Pools Message

Been trying this latest version and cannot get it running. All I ever get is No Pools message.
Is config.ini supposed to be an actual .ini file or or is it supposed to be a .txt file? Well I tried both.
Its acting like it isnt seeing the wallet in the config file.

N-Excavator-1.5.5a

Предлагаю отключить N-Excavator-1.5.5a, т.к. в связи с особенностями NH, если нет заказов, то Excavator не завершает свою работу и молотит впустую.
Эта проблема была и в предыдущих версиях начиная с версии 1.5.0.

Incorrect URI: A-SgminerSkunk

File not available anymore @ https://github.com/signatumd/releases/raw/master/sigt-miner.zip

New location: https://github.com/Seci-Coin/Seci/releases ? I haven't validated this yet, though...

Automatic overclocking (or underclocking) optimization through Afterburner?

First of all, great job with integrating the miner with Afterburner!

It got me thinking, it would be great if the algorithm could change the core clock and the memory clock in order to find the profitability sweet-spot. I was thinking of something like setting the lower bound, the upper bound, and step size, so that the user can constrain the parameters to be within some stable range.

Incidentally, maybe it would be a good idea to do the same with the power limits. For example, if I want to use all the power limits from 50% to 150% in steps of 5%, it would be much easier to set it with those 3 parameters (50,150,5), instead of writing everything (50, 55, ... , 95, 100, 105, ... ,145 150). I assume that most people use power limits like this anyway.

EquiHash (AMD): incorrect

Something seems to be off with EquiHash on NH.
Other algo's (on NH or other pools) seem to be fine...
If one RX570 can generate this, I'm ordering a shipload. ;-)

Same Algo on NVidia (same pool / different machine) generates more realistic values...

AMD CPU: CPU-tdp.json

Updated cpu-tdp.json with ", "AMD Ryzen 5 1600 Six-Core Processor": 65}" but Wattage still not shown (still reporting: 0W)
Same type of change on a Intel CPU worked fine.

The AMD-string I extracted from DeviceList.bat... something doing wrong?

   Type: CPU

  Id Group Name                                            Cores Threads CacheL3   Clock Load Temp Power*
  -- ----- ----                                            ----- ------- -------   ----- ---- ---- ------
CPU0   CPU AMD Ryzen 5 1600 Six-Core Processor                 6      12    16MB 3200Mhz 100%          0W

Incorrect Algo in N-CcminerDelos-1.2.2

Hi.
"HSR": "-a hsr"

Delosminer hack issue

As i read on community about delosminer and its been hacking wallet, I just want to know why you still using it in your app?

the link for this matter :
https://discordapp.com/channels/447367713783021598/447376063375605761
nemosminer/NemosMiner#649

Forager 1.2: NVIDIA power not captured

Codebase grabbed on 9-May (v1.1) was showing the Watt for my NVIDIA cards fine, but v1.2 (grabbed on 13-May) does not show the wattage anymore… .

[suggestion] Pool fees in the menu

It would be useful to see the fee percentage for each of the pools in the "SELECT POOL/S TO MINE" menu, in an additional column. Most of them have a global fee anyway.

A-XMR-Stak-Aeon-2.4.7: Parameter Unknown

Parameter unknown '#NoSSL#-o#NoSSL#'
Press any key to exit.

Miner suddenly doesn't even start

So, out of nowhere, when I start the miner, I get to this point...

Press Enter to continue...: 
Transcript started, output file is .\Logs\2018-05-27_18-35-28.txt
Transcript stopped, output file is G:\Desktop\Forager\Logs\2018-05-27_18-35-28.txt

...and then nothing happens. I tried purging Cache and Logs, restarting the PC, but nothing happens.

This is the entire log:

**********************
Windows PowerShell transcript start
Start time: 20180527183630
Username: TSUNKUNPC\TsunKun
RunAs User: TSUNKUNPC\TsunKun
Configuration Name: 
Machine: TSUNKUNPC (Microsoft Windows NT 10.0.16299.0)
Host Application: powershell -version 5.0 -noexit -executionpolicy bypass -command & .\Miner.ps1
Process ID: 7016
PSVersion: 5.1.16299.15
PSEdition: Desktop
PSCompatibleVersions: 1.0, 2.0, 3.0, 4.0, 5.0, 5.1.16299.15
BuildVersion: 10.0.16299.15
CLRVersion: 4.0.30319.42000
WSManStackVersion: 3.0
PSRemotingProtocolVersion: 2.3
SerializationVersion: 1.1.0.1
**********************
Transcript started, output file is .\Logs\2018-05-27_18-36-30.txt
**********************
Windows PowerShell transcript end
End time: 20180527183630
**********************
05/27/2018 18:36:30...... Forager v1.6