Problem with OpenOCD: `board/st_nucleo_l4.cfg`

[g40]

Problem with OpenOCD: `board/st_nucleo_l4.cfg`

[github-actions]

Hi @g40! We appreciate you submitting your first issue for our open-source project. 🌟

Even though I'm a bot, I can assure you that the whole community is genuinely grateful for your time and effort. 🤖💙

[g40]

It's a path problem. See spew below. OpenOCD is on the path, but not according to west. Does the tools installation cache paths or something?

r:\src\embedded\zephyrproject\zephyr>west flash
-- west flash: rebuilding
ninja: no work to do.
-- west flash: using runner openocd
FATAL ERROR: required program R:/apps/bin/openocd.exe not found; install it or add its location to PATH

r:\src\embedded\zephyrproject\zephyr>which openocd
/r/apps/openocd/bin/openocd

r:\src\embedded\zephyrproject\zephyr>where openocd
r:\apps\openocd\bin\openocd.exe

r:\src\embedded\zephyrproject\zephyr>openocd --version
Open On-Chip Debugger 0.12.0 (2023-01-14-23:37)
Licensed under GNU GPL v2
For bug reports, read
        http://openocd.org/doc/doxygen/bugs.html

[erwango]

Moving to discussions until it is clear there is something to be fixed