Turnstile not working anymore

[ledean]

Turnstile not working anymore

[zfcsoftware]

It should be fixed. Please check with the latest version.

[CValeron]

It should be fixed. Please check with the latest version.

I have updated and working now with proxy. Thank you very much

[zfcsoftware]

webshare free version, but I am passing bandwith fastly :) any suggestion to use it only for cf pass?

https://github.com/zfcsoftware/cf-clearance-scraper

I can confirm that with not so suspicious proxies the lib is working.

Then the problem seems to be caused by Cloudflare's proxy update. @EgglezosK Do you have the same situation? Probably when you tested without using a proxy, your home ip address was clean so it allowed the transition. Can you test with a clean ip address? A lot of cpu consumption, long hold time and constant page refresh may be a proxy score issue.

i just check all my proxies and all are 99 - High Risk from webshare. with my local ip and https://nopecha.com/captcha/cloudflare it seems to works as i told before. The weird part of the story is that when you set turnstile:false and you use a Hight Risk Proxy it by pass it

Maybe they are tracking the mouse on risky ip addresses. Obviously they update very often and monitor all libraries. Right now this library has a CDP detection problem. I will fix that soon. In the meantime, I have 100% spam scoring proxies on webshare that allow me to pass through. It's a strange situation.

if you want share one of these with me via mail to check the results of it.

I'll send you a proxy when I can to test it. Thank you for your time.

[zfcsoftware]

Which site? Which operating system?

[EgglezosK]

@zfcsoftware From today the iframe for some reason will be not detected on the code thats the problem, i investigate it also.

[0-don]

yes having same issue currently

[EgglezosK]

It should be fixed. Please check with the latest version.

Its working now! ( I still have the same issue while using proxies thought )

[0-don]

It should be fixed. Please check with the latest version.

Its working now! ( I still have the same issue while using proxies thought )

you need to rotate more it still works just takes time

[EgglezosK]

It should be fixed. Please check with the latest version.

Its working now! ( I still have the same issue while using proxies thought )

you need to rotate more it still works just takes time

By rotate you mean to change proxies or let it trying again and again with the same?

[zfcsoftware]

It should be fixed. Please check with the latest version.

Its working now! ( I still have the same issue while using proxies thought )

It should be fixed. Please check with the latest version.

Its working now! ( I still have the same issue while using proxies thought )

you need to rotate more it still works just takes time

I started to have problems with spinning more and consuming a lot of cpu. This and other cf migration methods can do this occasionally. I'm looking for a solution, it's an open source library so I don't have much time, but I'll make some nice updates when I have time.

It works even with a proxy. I have tested this many times but I have not encountered an error. If you can send me a code and a vps provider that can reproduce the problem, I can do the tests. However, I did not see a problem in my tests.

[EgglezosK]

It should be fixed. Please check with the latest version.

Its working now! ( I still have the same issue while using proxies thought )

It should be fixed. Please check with the latest version.

Its working now! ( I still have the same issue while using proxies thought )

you need to rotate more it still works just takes time

I started to have problems with spinning more and consuming a lot of cpu. This and other cf migration methods can do this occasionally. I'm looking for a solution, it's an open source library so I don't have much time, but I'll make some nice updates when I have time.

It works even with a proxy. I have tested this many times but I have not encountered an error. If you can send me a code and a vps provider that can reproduce the problem, I can do the tests. However, I did not see a problem in my tests.

I am going to send you on private email right now. In the Email you will find also an openvpn file that you can use and run your library without proxies, and you will be noticed that the same problem will appear, spinning and reload again and again until timeout.

[cod888]

Confirm the above comment. The last solution fixed the clicking issue, but spinning is still there for some (marked as suspicions) proxies. it worked before the CF made the latest updates.

[zfcsoftware]

Confirm the above comment. The last solution fixed the clicking issue, but spinning is still there for some (marked as suspicions) proxies. it worked before the CF made the latest updates.

https://blog.cloudflare.com/residential-proxy-bot-detection-using-machine-learning/
I think that's it. The problem seems to be the proxy, not the library.
I will test this possibility.

[cod888]

I used ISP proxies but maybe they don't care about it :)
anyway .. with manual clicking it still working with these proxies btw

[zfcsoftware]

I used ISP proxies but maybe they don't care about it :) anyway .. with manual clicking it still working with these proxies btw

It should be fixed. Please check with the latest version.

Its working now! ( I still have the same issue while using proxies thought )

It should be fixed. Please check with the latest version.

Its working now! ( I still have the same issue while using proxies thought )

you need to rotate more it still works just takes time

I started to have problems with spinning more and consuming a lot of cpu. This and other cf migration methods can do this occasionally. I'm looking for a solution, it's an open source library so I don't have much time, but I'll make some nice updates when I have time.
It works even with a proxy. I have tested this many times but I have not encountered an error. If you can send me a code and a vps provider that can reproduce the problem, I can do the tests. However, I did not see a problem in my tests.

I am going to send you on private email right now. In the Email you will find also an openvpn file that you can use and run your library without proxies, and you will be noticed that the same problem will appear, spinning and reload again and again until timeout.

I used ISP proxies but maybe they don't care about it :) anyway .. with manual clicking it still working with these proxies btw

Could it be that it checks the browser more thoroughly for suspicious ip addresses?
https://www.ipqualityscore.com/free-ip-lookup-proxy-vpn-test/lookup/159.146.35.11
The problem does not recur on my computer, but could you please test with a proxy that has a very low spam score on this site?

[cod888]

I can confirm that with not-so-suspicious proxies, the latest changes are working.

[zfcsoftware]

I can confirm that with not so suspicious proxies the lib is working.

Then the problem seems to be caused by Cloudflare's proxy update.
@EgglezosK Do you have the same situation? Probably when you tested without using a proxy, your home ip address was clean so it allowed the transition. Can you test with a clean ip address? A lot of cpu consumption, long hold time and constant page refresh may be a proxy score issue.

[EgglezosK]

I can confirm that with not so suspicious proxies the lib is working.

Then the problem seems to be caused by Cloudflare's proxy update. @EgglezosK Do you have the same situation? Probably when you tested without using a proxy, your home ip address was clean so it allowed the transition. Can you test with a clean ip address? A lot of cpu consumption, long hold time and constant page refresh may be a proxy score issue.

i just check all my proxies and all are 99 - High Risk from webshare. with my local ip and https://nopecha.com/captcha/cloudflare it seems to works as i told before. The weird part of the story is that when you set turnstile:false and you use a Hight Risk Proxy it by pass it

[zfcsoftware]

I can confirm that with not so suspicious proxies the lib is working.

Then the problem seems to be caused by Cloudflare's proxy update. @EgglezosK Do you have the same situation? Probably when you tested without using a proxy, your home ip address was clean so it allowed the transition. Can you test with a clean ip address? A lot of cpu consumption, long hold time and constant page refresh may be a proxy score issue.

i just check all my proxies and all are 99 - High Risk from webshare. with my local ip and https://nopecha.com/captcha/cloudflare it seems to works as i told before. The weird part of the story is that when you set turnstile:false and you use a Hight Risk Proxy it by pass it

Maybe they are tracking the mouse on risky ip addresses. Obviously they update very often and monitor all libraries. Right now this library has a CDP detection problem. I will fix that soon. In the meantime, I have 100% spam scoring proxies on webshare that allow me to pass through. It's a strange situation.

[cod888]

I can confirm that with not so suspicious proxies the lib is working.

Then the problem seems to be caused by Cloudflare's proxy update. @EgglezosK Do you have the same situation? Probably when you tested without using a proxy, your home ip address was clean so it allowed the transition. Can you test with a clean ip address? A lot of cpu consumption, long hold time and constant page refresh may be a proxy score issue.

i just check all my proxies and all are 99 - High Risk from webshare. with my local ip and https://nopecha.com/captcha/cloudflare it seems to works as i told before. The weird part of the story is that when you set turnstile:false and you use a Hight Risk Proxy it by pass it

Maybe they are tracking the mouse on risky ip addresses. Obviously they update very often and monitor all libraries. Right now this library has a CDP detection problem. I will fix that soon. In the meantime, I have 100% spam scoring proxies on webshare that allow me to pass through. It's a strange situation.

it works with 100% spammy proxies because you have that fix for cdp. we can check it when you push it :-)

[EgglezosK]

I can confirm that with not so suspicious proxies the lib is working.

Then the problem seems to be caused by Cloudflare's proxy update. @EgglezosK Do you have the same situation? Probably when you tested without using a proxy, your home ip address was clean so it allowed the transition. Can you test with a clean ip address? A lot of cpu consumption, long hold time and constant page refresh may be a proxy score issue.

i just check all my proxies and all are 99 - High Risk from webshare. with my local ip and https://nopecha.com/captcha/cloudflare it seems to works as i told before. The weird part of the story is that when you set turnstile:false and you use a Hight Risk Proxy it by pass it

Maybe they are tracking the mouse on risky ip addresses. Obviously they update very often and monitor all libraries. Right now this library has a CDP detection problem. I will fix that soon. In the meantime, I have 100% spam scoring proxies on webshare that allow me to pass through. It's a strange situation.

if you want share one of these with me via mail to check the results of it.

[EgglezosK]

It should be fixed. Please check with the latest version.

I have updated and working now with proxy. Thank you very much

what kind of proxy?

[CValeron]

webshare free version, but I am passing bandwith fastly :) any suggestion to use it only for cf pass?

[mrcas]

Cannot pass https://chatgpt.com