3DR-Radio firmware and stock multiwii

[GoogleCodeExporter]

3DR-Radio firmware and stock multiwii

[GoogleCodeExporter]

please send me your config.h for checking.

Original comment by [email protected] on 29 Dec 2013 at 6:28

[GoogleCodeExporter]

Here we go ....

Original comment by [email protected] on 29 Dec 2013 at 6:34

Attachments:

• config.h

[GoogleCodeExporter]

OK, it seems ok. Could you please try to reupload the original 3dr firmware and 
test the connectivity ? I would like to close out settings and hw issues.

Original comment by [email protected] on 29 Dec 2013 at 7:10

[GoogleCodeExporter]

With the 3DRRadio Config 1.2 by pressing "Upload Firmware (Local)". This will 
result in "SiK 1.8.1 on HM-TRP". Right?

Original comment by [email protected] on 29 Dec 2013 at 7:33

[GoogleCodeExporter]

Exactly

Original comment by [email protected] on 29 Dec 2013 at 7:40

[GoogleCodeExporter]

OK, can do tomorrow. I need longer wires to connect from USB/UART-Bridge to the 
air-module in the copter.

Original comment by [email protected] on 29 Dec 2013 at 7:51

[GoogleCodeExporter]

Problem solved .....

Any time you start the MWii-GUI you have to select 
Com-Speed 57600 first, then connect to the port. Works both with
stock firmware and SiK 2.3.

The com-speed isn't saved by MultiWiiConf. 

Sorry for wasting your time.

Original comment by [email protected] on 30 Dec 2013 at 11:59

[GoogleCodeExporter]

Another issue:

The values in the gui are only updated after hitting the Read-Button several
times. Sometimes the Aux-boxes are cleared and you have to hit "Read" several 
times
to get them back.

Original comment by [email protected] on 30 Dec 2013 at 2:53

[GoogleCodeExporter]

Original comment by [email protected] on 24 Feb 2014 at 7:05

• Changed state: Done

[GoogleCodeExporter]

Hi.
Have been trying to fix this issue for hours now. Your info made the confi work 
for the 868Mhz 3DR Radio System like a charm!

Basically, its like this:
-Download 3DR Radio config
-Download the Sik mw 2.3 Firmware for your TX/RX system (works on 433, 868 and 
915 Mhz)
-Flash your Silabs TX/RX Combo with the SIK MW Firmware using 3DR Radio config 
and adjust your settings accordingly
-Set your COM Port Speed in config.h to 57600 (I'm using Com 3 so I need to 
adjust the settings for COM 3 obviously)
-Open Multi WII Gui, FIRST go to settings and click ONCE on 57600 BAUD, THEN 
select comport and click start.

Hitting read multiple times saved me a lot of trouble.
Thanks everybody!

Original comment by [email protected] on 12 Jul 2014 at 1:09