Vivado Block design, local param, and axixbar

[zipcpu]

Vivado Block design, local param, and axixbar

[ZipCPU]

Hmm, yes, I see your problem.

Let's start at the top, though, with the localparam's. I'll take a note to look into that one. It'd be annoying, 'cause it'll make the line lengths all that much longer, but let me take a peek at what can be done there.

As for how tedious the interface can be to use, yeah, I can get that one as well. That's why I connect it up using software, rather than by hand using Xilinx's IP integrator. At this, I'm open to ideas. However, Xilinx's approach is a non-starter--it would break all kinds of lint rules. For example, I/O's must be used, they cannot be left unconnected. Likewise, I/O's must use the full width. etc., etc., etc. Perhaps there's an SV way to do this? Perhaps I should write a script for this purpose? But ... I have one, and it is open source ... so I don't really have a good answer to this.

Dan

[baileyji]

Thanks for the feedback. I'll close this as ideas here are beyond what I can offer.