Comments (9)
cdjackson
commented on September 27, 2024
Can you take a look in the main debug log to see if you find some IeeeAddressResponse messages - ideally it would be good if you can correlate them with these errors, but even if not, if these errors are happening around the time of some IeeeAddressResponse message it would be good if you could post the debug file.
from com.zsmartsystems.zigbee.
5iver
commented on September 27, 2024
Like this one? They come in pretty much continuously, but not currently getting the NPE.
2017-07-12 12:51:32.664 [ZigBeeNetworkManager ] - RX CMD: IeeeAddressResponse [52772/0 -> 0/0, cluster=8001, TID=NULL, status=SUCCESS, ieeeAddrRemoteDev=7CE524000014C420, nwkAddrRemoteDev=52772, numAssocDev=0, startIndex=null, nwkAddrAssocDevList=[]]
from com.zsmartsystems.zigbee.
cdjackson
commented on September 27, 2024
Ok - I'd need to see one with the NPE. This message looks ok - specifically, I'm wondering if the numAssocDev shows as null when there's an error.
from com.zsmartsystems.zigbee.
5iver
commented on September 27, 2024
I kicked off a discovery, which I though might have triggered the NPEs last night, and saw one of the single line ones. So I grabbed the logs from the last hour. I'm not sure on the timing, but think it occurred within a 15 minute window. I'll try to find something...
from com.zsmartsystems.zigbee.
cdjackson
commented on September 27, 2024
Thanks.
… On 12 Jul 2017, at 18:41, Scott Rushworth ***@***.***> wrote:
I kicked off a discovery, which I though might have triggered the NPEs last night, and saw one of the single line ones. So I grabbed the logs from the last hour. I'm not sure on the timing, but think it occurred within a 15 minute window. I'll try to find something...
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub <#49 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AA_kQ9EPhgzCRz7Z8PnsVX5EhGXXEM7Yks5sNQVggaJpZM4OV0ay>.
from com.zsmartsystems.zigbee.
5iver
commented on September 27, 2024
I don't think there is a direct correlation. There was only one NPE in Karaf but lots of them in the log. This is not all of them...
2017-07-12 13:14:32.159 [ZigBeeNetworkManager ] - RX CMD: IeeeAddressResponse [33836/0 -> 0/0, cluster=8001, TID=NULL, status=DEVICE_NOT_FOUND, ieeeAddrRemoteDev=null, nwkAddrRemoteDev=null, numAssocDev=null, startIndex=null, nwkAddrAssocDevList=[]]
2017-07-12 13:14:32.163 [ZigBeeNetworkManager ] - RX CMD: IeeeAddressResponse [15829/0 -> 0/0, cluster=8001, TID=NULL, status=DEVICE_NOT_FOUND, ieeeAddrRemoteDev=null, nwkAddrRemoteDev=null, numAssocDev=null, startIndex=null, nwkAddrAssocDevList=[]]
2017-07-12 13:14:32.167 [ZigBeeNetworkManager ] - RX CMD: IeeeAddressResponse [21751/0 -> 0/0, cluster=8001, TID=NULL, status=DEVICE_NOT_FOUND, ieeeAddrRemoteDev=null, nwkAddrRemoteDev=null, numAssocDev=null, startIndex=null, nwkAddrAssocDevList=[]]
2017-07-12 13:14:32.174 [ZigBeeNetworkManager ] - RX CMD: IeeeAddressResponse [35243/0 -> 0/0, cluster=8001, TID=NULL, status=DEVICE_NOT_FOUND, ieeeAddrRemoteDev=null, nwkAddrRemoteDev=null, numAssocDev=null, startIndex=null, nwkAddrAssocDevList=[]]
2017-07-12 13:14:32.202 [ZigBeeNetworkManager ] - RX CMD: IeeeAddressResponse [47277/0 -> 0/0, cluster=8001, TID=NULL, status=SUCCESS, ieeeAddrRemoteDev=7CE524000012CC42, nwkAddrRemoteDev=47277, numAssocDev=null, startIndex=null, nwkAddrAssocDevList=[]]
2017-07-12 13:14:32.204 [ZigBeeNetworkManager ] - RX CMD: IeeeAddressResponse [7798/0 -> 0/0, cluster=8001, TID=NULL, status=DEVICE_NOT_FOUND, ieeeAddrRemoteDev=null, nwkAddrRemoteDev=null, numAssocDev=null, startIndex=null, nwkAddrAssocDevList=[]]
2017-07-12 13:14:32.206 [ZigBeeNetworkManager ] - RX CMD: IeeeAddressResponse [46214/0 -> 0/0, cluster=8001, TID=NULL, status=DEVICE_NOT_FOUND, ieeeAddrRemoteDev=null, nwkAddrRemoteDev=null, numAssocDev=null, startIndex=null, nwkAddrAssocDevList=[]]
2017-07-12 13:14:32.209 [ZigBeeNetworkManager ] - RX CMD: IeeeAddressResponse [3117/0 -> 0/0, cluster=8001, TID=NULL, status=DEVICE_NOT_FOUND, ieeeAddrRemoteDev=null, nwkAddrRemoteDev=null, numAssocDev=null, startIndex=null, nwkAddrAssocDevList=[]]
2017-07-12 13:14:32.232 [ZigBeeNetworkManager ] - RX CMD: IeeeAddressResponse [12203/0 -> 0/0, cluster=8001, TID=NULL, status=DEVICE_NOT_FOUND, ieeeAddrRemoteDev=null, nwkAddrRemoteDev=null, numAssocDev=null, startIndex=null, nwkAddrAssocDevList=[]]
2017-07-12 13:14:32.319 [ZigBeeNetworkManager ] - RX CMD: IeeeAddressResponse [37647/0 -> 0/0, cluster=8001, TID=NULL, status=DEVICE_NOT_FOUND, ieeeAddrRemoteDev=null, nwkAddrRemoteDev=null, numAssocDev=null, startIndex=null, nwkAddrAssocDevList=[]]
2017-07-12 13:14:32.364 [ZigBeeNetworkManager ] - RX CMD: IeeeAddressResponse [52772/0 -> 0/0, cluster=8001, TID=NULL, status=DEVICE_NOT_FOUND, ieeeAddrRemoteDev=null, nwkAddrRemoteDev=null, numAssocDev=null, startIndex=null, nwkAddrAssocDevList=[]]
2017-07-12 13:14:32.368 [ZigBeeNetworkManager ] - RX CMD: IeeeAddressResponse [12203/0 -> 0/0, cluster=8001, TID=NULL, status=DEVICE_NOT_FOUND, ieeeAddrRemoteDev=null, nwkAddrRemoteDev=null, numAssocDev=null, startIndex=null, nwkAddrAssocDevList=[]]
2017-07-12 13:14:32.372 [ZigBeeNetworkManager ] - RX CMD: IeeeAddressResponse [8916/0 -> 0/0, cluster=8001, TID=NULL, status=DEVICE_NOT_FOUND, ieeeAddrRemoteDev=null, nwkAddrRemoteDev=null, numAssocDev=null, startIndex=null, nwkAddrAssocDevList=[]]
from com.zsmartsystems.zigbee.
cdjackson
commented on September 27, 2024
Status needs to be SUCCESS for the exception to occur, so there’s one exception in there and this confirms what I was thinking. One last request if possible - do you see the debug messages "RX EZSP”? I’d like to get the packet data if possible, then I can use this to define a test.
from com.zsmartsystems.zigbee.
5iver
commented on September 27, 2024
2017-07-12 13:14:32.201 [ZigBeeDongleEzsp ] - Unhandled EZSP Frame: EzspSendUnicastResponse [status=EMBER_SUCCESS, sequence=63]
2017-07-12 13:14:32.202 [AshFrameHandler ] - RX EZSP: EzspIncomingMessageHandler [type=EMBER_INCOMING_UNICAST, apsFrame=EmberApsFrame [profileId=0, clusterId=32769, sourceEndpoint=0, destinationEndpoint=0, options=[], groupId=0, sequence=32], lastHopLqi=245, lastHopRssi=-67, sender=47277, bindingIndex=255, addressIndex=255, messageContents=BA 00 42 CC 12 00 00 24 E5 7C AD B8]
2017-07-12 13:14:32.202 [ZigBeeDongleEzsp ] - RX: EzspIncomingMessageHandler [type=EMBER_INCOMING_UNICAST, apsFrame=EmberApsFrame [profileId=0, clusterId=32769, sourceEndpoint=0, destinationEndpoint=0, options=[], groupId=0, sequence=32], lastHopLqi=245, lastHopRssi=-67, sender=47277, bindingIndex=255, addressIndex=255, messageContents=BA 00 42 CC 12 00 00 24 E5 7C AD B8]
2017-07-12 13:14:32.202 [ZigBeeNetworkManager ] - RX CMD: IeeeAddressResponse [47277/0 -> 0/0, cluster=8001, TID=NULL, status=SUCCESS, ieeeAddrRemoteDev=7CE524000012CC42, nwkAddrRemoteDev=47277, numAssocDev=null, startIndex=null, nwkAddrAssocDevList=[]]
2017-07-12 13:14:32.204 [AshFrameHandler ] - RX EZSP: EzspIncomingMessageHandler [type=EMBER_INCOMING_UNICAST, apsFrame=EmberApsFrame [profileId=0, clusterId=32769, sourceEndpoint=0, destinationEndpoint=0, options=[], groupId=0, sequence=2], lastHopLqi=254, lastHopRssi=-83, sender=7798, bindingIndex=255, addressIndex=255, messageContents=BA 81 F0 36 06 00 00 24 E5 7C AD B8]
2017-07-12 13:14:32.204 [ZigBeeDongleEzsp ] - RX: EzspIncomingMessageHandler [type=EMBER_INCOMING_UNICAST, apsFrame=EmberApsFrame [profileId=0, clusterId=32769, sourceEndpoint=0, destinationEndpoint=0, options=[], groupId=0, sequence=2], lastHopLqi=254, lastHopRssi=-83, sender=7798, bindingIndex=255, addressIndex=255, messageContents=BA 81 F0 36 06 00 00 24 E5 7C AD B8]
2017-07-12 13:14:32.204 [ZigBeeNetworkManager ] - RX CMD: IeeeAddressResponse [7798/0 -> 0/0, cluster=8001, TID=NULL, status=DEVICE_NOT_FOUND, ieeeAddrRemoteDev=null, nwkAddrRemoteDev=null, numAssocDev=null, startIndex=null, nwkAddrAssocDevList=[]]
2017-07-12 13:14:32.206 [AshFrameHandler ] - RX EZSP: EzspIncomingMessageHandler [type=EMBER_INCOMING_UNICAST, apsFrame=EmberApsFrame [profileId=0, clusterId=32769, sourceEndpoint=0, destinationEndpoint=0, options=[], groupId=0, sequence=174], lastHopLqi=254, lastHopRssi=-78, sender=46214, bindingIndex=255, addressIndex=255, messageContents=BA 81 84 18 16 00 00 24 25 7C AD B8]
2017-07-12 13:14:32.206 [ZigBeeDongleEzsp ] - RX: EzspIncomingMessageHandler [type=EMBER_INCOMING_UNICAST, apsFrame=EmberApsFrame [profileId=0, clusterId=32769, sourceEndpoint=0, destinationEndpoint=0, options=[], groupId=0, sequence=174], lastHopLqi=254, lastHopRssi=-78, sender=46214, bindingIndex=255, addressIndex=255, messageContents=BA 81 84 18 16 00 00 24 25 7C AD B8]
from com.zsmartsystems.zigbee.
cdjackson
commented on September 27, 2024
Thanks - I think this captures it. I’ll take a look at this in the next day or so.
… On 12 Jul 2017, at 19:11, Scott Rushworth ***@***.***> wrote:
2017-07-12 13:14:32.201 [ZigBeeDongleEzsp ] - Unhandled EZSP Frame: EzspSendUnicastResponse [status=EMBER_SUCCESS, sequence=63]
2017-07-12 13:14:32.202 [AshFrameHandler ] - RX EZSP: EzspIncomingMessageHandler [type=EMBER_INCOMING_UNICAST, apsFrame=EmberApsFrame [profileId=0, clusterId=32769, sourceEndpoint=0, destinationEndpoint=0, options=[], groupId=0, sequence=32], lastHopLqi=245, lastHopRssi=-67, sender=47277, bindingIndex=255, addressIndex=255, messageContents=BA 00 42 CC 12 00 00 24 E5 7C AD B8]
2017-07-12 13:14:32.202 [ZigBeeDongleEzsp ] - RX: EzspIncomingMessageHandler [type=EMBER_INCOMING_UNICAST, apsFrame=EmberApsFrame [profileId=0, clusterId=32769, sourceEndpoint=0, destinationEndpoint=0, options=[], groupId=0, sequence=32], lastHopLqi=245, lastHopRssi=-67, sender=47277, bindingIndex=255, addressIndex=255, messageContents=BA 00 42 CC 12 00 00 24 E5 7C AD B8]
2017-07-12 13:14:32.202 [ZigBeeNetworkManager ] - RX CMD: IeeeAddressResponse [47277/0 -> 0/0, cluster=8001, TID=NULL, status=SUCCESS, ieeeAddrRemoteDev=7CE524000012CC42, nwkAddrRemoteDev=47277, numAssocDev=null, startIndex=null, nwkAddrAssocDevList=[]]
2017-07-12 13:14:32.204 [AshFrameHandler ] - RX EZSP: EzspIncomingMessageHandler [type=EMBER_INCOMING_UNICAST, apsFrame=EmberApsFrame [profileId=0, clusterId=32769, sourceEndpoint=0, destinationEndpoint=0, options=[], groupId=0, sequence=2], lastHopLqi=254, lastHopRssi=-83, sender=7798, bindingIndex=255, addressIndex=255, messageContents=BA 81 F0 36 06 00 00 24 E5 7C AD B8]
2017-07-12 13:14:32.204 [ZigBeeDongleEzsp ] - RX: EzspIncomingMessageHandler [type=EMBER_INCOMING_UNICAST, apsFrame=EmberApsFrame [profileId=0, clusterId=32769, sourceEndpoint=0, destinationEndpoint=0, options=[], groupId=0, sequence=2], lastHopLqi=254, lastHopRssi=-83, sender=7798, bindingIndex=255, addressIndex=255, messageContents=BA 81 F0 36 06 00 00 24 E5 7C AD B8]
2017-07-12 13:14:32.204 [ZigBeeNetworkManager ] - RX CMD: IeeeAddressResponse [7798/0 -> 0/0, cluster=8001, TID=NULL, status=DEVICE_NOT_FOUND, ieeeAddrRemoteDev=null, nwkAddrRemoteDev=null, numAssocDev=null, startIndex=null, nwkAddrAssocDevList=[]]
2017-07-12 13:14:32.206 [AshFrameHandler ] - RX EZSP: EzspIncomingMessageHandler [type=EMBER_INCOMING_UNICAST, apsFrame=EmberApsFrame [profileId=0, clusterId=32769, sourceEndpoint=0, destinationEndpoint=0, options=[], groupId=0, sequence=174], lastHopLqi=254, lastHopRssi=-78, sender=46214, bindingIndex=255, addressIndex=255, messageContents=BA 81 84 18 16 00 00 24 25 7C AD B8]
2017-07-12 13:14:32.206 [ZigBeeDongleEzsp ] - RX: EzspIncomingMessageHandler [type=EMBER_INCOMING_UNICAST, apsFrame=EmberApsFrame [profileId=0, clusterId=32769, sourceEndpoint=0, destinationEndpoint=0, options=[], groupId=0, sequence=174], lastHopLqi=254, lastHopRssi=-78, sender=46214, bindingIndex=255, addressIndex=255, messageContents=BA 81 84 18 16 00 00 24 25 7C AD B8]
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub <#49 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AA_kQ-6NXnfdXb8k1RZtrOe8uLOhR-Qtks5sNQxEgaJpZM4OV0ay>.
from com.zsmartsystems.zigbee.
Related Issues (20)
- Separate logs generated by multiple network managers in multiple files HOT 2
- Type of incoming/outgoing frame counters HOT 2
- ASH frame handler - receive queue is full HOT 2
- ArrayIndexOutOfBoundsException during shuffle of outstanding queues (transaction manager) HOT 6
- ConcurrentModificationException while iterating queues HOT 4
- Support for Silicon Labs multiprotocol stack when using Silabs Multi-PAN RPC (Radio Co-Processor) firmware HOT 1
- Queues not shutting down properly HOT 1
- [REQUEST] Standard "Open ZigBee Coordinator Backup Format" support for Zigbee network backups and restoring from and to other ecosystems/platforms?
- Should ZigBeeDongleTelegesis return NO_NETWORK when Network Information Command returns "NoPAN"? HOT 3
- Animal sniffer reports errors on projects HOT 3
- Optimize thread pools to spare resource consumption HOT 5
- EZSP v12 (EmberZNet Serial Protocol versions 12) for Silicon Labs Ember NCP dongles? HOT 12
- Possibly a problem with OTA upgrades HOT 6
- Insecure Zigbee Network Encryption Key Generation HOT 3
- EZSP v13 (EmberZNet Serial Protocol versions 13) for Silicon Labs Ember NCP dongles?
- Configurable transactionTimeout in XBee public API HOT 5
- Console doesn't start - CC2531 HOT 2
- NPE while initializing transport layer HOT 6
- NPE in ZigBeeNetworkDiscoverer HOT 2
- EZSP v14 fsupport for Zigbee EmberZNet 8.0.0.0 (and migration to Silicon Labs Gecko SDK 5.0.0.0) HOT 3
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from com.zsmartsystems.zigbee.