An Arduino based device that generates a password from the UID of your RFID card. You can set your computer's password to the generated string and automatically log in with the swipe of the RFID card.
- Arduino Leonardo (needs to be HID compatible)
- RFID-Modul
- LED
- 220 Ohm Resistor
- Jumper Wire (female-male and female-female)
RFID Reader | Arduino |
---|---|
VCC | 3.3v |
RST/Reset | RESET/ICSP-5 |
SPI SS | Pin 10 |
SPI MOSI | ICSP-4 |
SPI MISO | ICSP-1 |
SPI SCK | ICSP-3 |
GND | GND |
Led | Arduino |
---|---|
LED + | Pin 8 |
LED - | GND |