11im/sherman

Sherman: A Write-Optimized Distributed B+Tree Index on Disaggregated Memory

Sherman: A Write-Optimized Distributed B+Tree Index on Disaggregated Memory

Sherman is a B+Tree on disaggregated memory; it uses one-sided RDMA verbs to perform all index operations. Sherman includes three techniques to boost write performance:

• A hierarchical locks leveraging on-chip memory of RDMA NICs.
• Coalescing dependent RDMA commands
• Two-level version layout in leaf nodes

For more details, please refer to our paper:

[SIGMOG'22] Sherman: A Write-Optimized Distributed B+Tree Index on Disaggregated Memory. Qing Wang and Youyou Lu and Jiwu Shu.

System Requirements

1. Mellanox ConnectX-5 NICs and above
2. RDMA Driver: MLNX_OFED_LINUX-4.7-3.2.9.0 (If you use MLNX_OFED_LINUX-5**, you should modify codes to resolve interface incompatibility)
3. NIC Firmware: version 16.26.4012 and above (to support on-chip memory, you can use ibstat to obtain the version)
4. memcached (to exchange QP information)
5. cityhash
6. boost 1.53 (to support boost::coroutines::symmetric_coroutine)

Setup about RDMA Network

1. RDMA NIC Selection.

You can modify this line according the RDMA NIC you want to use, where ibv_get_device_name(deviceList[i]) is the name of RNIC (e.g., mlx5_0) https://github.com/thustorage/Sherman/blob/9bb950887cd066ebf4f906edbb43bae8e728548d/src/rdma/Resource.cpp#L28

2. Gid Selection.

If you use RoCE, modify gidIndex in this line according to the shell command show_gids, which is usually 3. https://github.com/thustorage/Sherman/blob/c5ee9d85e090006df39c0afe025c8f54756a7aea/include/Rdma.h#L60

3. MTU Selection.

If you use RoCE and the MTU of your NIC is not equal to 4200 (check with ifconfig), modify the value path_mtu in src/rdma/StateTrans.cpp

4. On-Chip Memory Size Selection.

Change the constant kLockChipMemSize in include/Commmon.h, making it <= max size of on-chip memory.

Getting Started

• cd Sherman
• ./script/hugepage.sh to request huge pages from OS (use ./script/clear_hugepage.sh to return huge pages)
• mkdir build; cd build; cmake ..; make -j
• cp ../script/restartMemc.sh .
• configure ../memcached.conf, where the 1st line is memcached IP, the 2nd is memcached port

For each run with kNodeCount servers:

• ./restartMemc.sh (to initialize memcached server)
• In each server, execute ./benchmark kNodeCount kReadRatio kThreadCount

We emulate each server as one compute node and one memory node: In each server, as the compute node, we launch kThreadCount client threads; as the memory node, we launch one memory thread. kReadRatio is the ratio of get operations.

In ./test/benchmark.cpp, we can modify kKeySpace and zipfan, to generate different workloads. In addition, we can open the macro USE_CORO to bind kCoroCnt coroutine on each client thread.

TODO

• Re-write delete operations