4lex4/scantailor-libs-build

Building scantailor and its dependencies

Building ScanTailor Advanced and its dependencies

ScanTailor Advanced: https://github.com/4lex4/scantailor-advanced

This is an instruction for building ScanTailor Advanced and its dependencies for Windows and Linux.

Contents:

• Dependencies
• Tools
• ScanTailor building options
• Instructions
  • Windows
    • Preparing to building
    • Building with MinGW
      • Tools
      • Preparing tools
      1. Building dependencies
      2. Building ScanTailor
    • Building with MSVC
      • Tools
      • Preparing tools
      • Building for Windows 7 and higher
        1. Building dependencies
        2. Building ScanTailor
      • Building for Windows XP
        1. Building dependencies
        2. Building ScanTailor
  • Linux
    1. Getting dependencies
       • Downloading from repositories
       • Building from sources
    2. Building ScanTailor
  • macOS
• Packaging

Dependencies

1. Boost (>= 1.60)
2. libpng
3. zlib
4. jpeg
5. libtiff
6. Qt (>= 5.6) (Note: Qt 5.6.x are the latest versions that support Windows XP)

Tools

1. CMake

ScanTailor building options

Usage: cmake -D <option>=<value> ...

Useful options:

• CMAKE_INSTALL_PREFIX=<path> - install ScanTailor Advanced into the path after building.
• PORTABLE_VERSION=[ON|OFF] - whether to build portable version. If enabled, ScanTailor tries to store its settings and files inside the application folder if possible, else ScanTailor stores those in the system specific paths. If disabled, the settings and files are always stored in the system specific paths.

Instructions

Windows

Supported toolchains for Windows are MinGW and MSVC.

Preparing to building

1. Download the sources of ScanTailor Advanced

2. Clone this project. (Push the 'Clone or download' button above)

3. Unpack ScanTailor Advanced sources into a folder

4. Create the empty folder named libs near the ScanTailor sources folder (but not inside)

5. Download and unpack the sources of all the dependencies listed into the libs folder

6. Unpack the folder of this project there.
   You must have gotten a catalog structure similar to this:

   ..\
    |
    |-- libs
    |   |-- boost_1_xx_x
    |   |-- jpeg-9
    |   |-- libpng-1.x.xx
    |   |-- scantailor-libs-build-master
    |   |-- jpeg-9x
    |   |-- qt-everywhere-opensource-src-5.x.x
    |   |-- tiff-4.x.x
    |   |-- zlib-1.x.x
    |   
    |-- scantailor-advanced-x.x.x
    |
   

7. Install CMake

Building with MinGW

Tools

1. MinGW-w64 (for 32 and 64 bit Windows; posix and dwarf / seh versions recommended)
2. msys2

Preparing tools

1. Install mingw64 into the path C:\mingw64 / C:\mingw32
2. Install msys2 into the path C:\msys64 / C:\msys32
3. Run script configure_msys.bat with administrative permissions
4. Add mingw into the PATH environment variable:
   1. Go to: My Computer -> Right click -> Properties -> Advanced system settings
   2. Click Environment variables
   3. Find Path variable in the system variables tab and paste ;C:\mingw64\bin / ;C:\mingw32\bin at the end of its value

Building dependencies

1. Run script configure_libs_x32.bat / configure_libs_x64.bat

2. Open the command prompt (cmd), navigate to the scantailor-libs-build-master directory (cd /d "<dir>") and enter:

   mkdir build & cd build
   cmake -G "MinGW Makefiles" --build ..
   mingw32-make -j %NUMBER_OF_PROCESSORS%
   

Note: when building successfully done the qt-everywhere-opensource-src-5.x.x and boost_1_xx_x folders can be removed to free up disk space.

Building ScanTailor

1. Open the command prompt (cmd), navigate to the scantailor-advanced-x.x.x directory (cd /d "<dir>") and enter:

   mkdir build & cd build
   cmake -G "MinGW Makefiles" --build ..
   mingw32-make -j %NUMBER_OF_PROCESSORS%
   

Building with MSVC

Tools

1. Visual Studio (version 2017 or higher [with the Win XP compability package] required)
2. Jom

Preparing tools

1. Place jom.exe into the %ProgramFiles(x86)%\Jom\ folder
2. Add Jom into the PATH environment variable:
   1. go to: My Computer -> Right click -> Properties -> Advanced system settings
   2. click Environment variables
   3. Find Path variable in the system variables tab and paste ;%ProgramFiles(x86)%\Jom\ at the end of its value

Building for Windows 7 and higher

Building dependencies

1. Open the Native Tools Command Prompt for VS, navigate to the scantailor-libs-build-master directory (cd /d "<dir>") and enter:

   mkdir build & cd build
   cmake -G "NMake Makefiles JOM" -D CMAKE_BUILD_TYPE=Release --build ..
   jom -j %NUMBER_OF_PROCESSORS%
   

Note: when building successfully done the qt-everywhere-opensource-src-5.x.x and boost_1_xx_x folders can be removed to free up disk space.

Building ScanTailor

1. Open the Native Tools Command Prompt for VS, navigate to the scantailor-advanced-x.x.x directory (cd /d "<dir>") and enter:

   mkdir build & cd build
   cmake -G "NMake Makefiles JOM" -D CMAKE_BUILD_TYPE=Release --build ..
   jom -j %NUMBER_OF_PROCESSORS%
   

Building for Windows XP

Building dependencies

1. Configure some environment variables. Open the Native Tools Command Prompt for VS and enter:

   set INCLUDE=%ProgramFiles(x86)%\Microsoft SDKs\Windows\v7.1A\Include;%INCLUDE%
   set PATH=%ProgramFiles(x86)%\Microsoft SDKs\Windows\v7.1A\Bin;%PATH%
   set LIB=%ProgramFiles(x86)%\Microsoft SDKs\Windows\v7.1A\Lib;%LIB%
   

2. Navigate to the scantailor-libs-build-master directory (cd /d "<dir>") and enter:

   mkdir build & cd build
   cmake -G "NMake Makefiles JOM" -D CMAKE_BUILD_TYPE=Release -D WIN_XP=ON --build ..
   jom -j %NUMBER_OF_PROCESSORS%
   

Note: when building successfully done the qt-everywhere-opensource-src-5.x.x and boost_1_xx_x folders can be removed to free up disk space.

Building ScanTailor

1. Configure some environment variables as stated above, if it has not been done yet

2. Navigate to the scantailor-advanced-x.x.x directory (cd /d "<dir>") and enter:

   mkdir build & cd build
   cmake -G "NMake Makefiles JOM" -D CMAKE_BUILD_TYPE=Release -D WIN_XP=ON --build ..
   jom -j %NUMBER_OF_PROCESSORS%
   

Linux

Getting dependencies

Linux users have two options here: download them from their repositories or build them from sources.

Downloading from repositories

1. Just download CMake and dependencies developing packages from the repository and then build scantailor. Developing packages are usually have -devel or -dev suffix

   Examples:

   Ubuntu

   sudo apt-get install gcc-7 g++-7 cmake libjpeg-dev libpng-dev libtiff5 libtiff5-dev libboost-test1.63-dev libboost-test1.63.0 qtbase5-dev libqt5svg5-dev qttools5-dev qttools5-dev-tools libqt5opengl5-dev libpthread-stubs0-dev
   OpenSUSE

   sudo zypper install gcc7 gcc7-c++ cmake libjpeg8-devel libpng16-devel libtiff5 libtiff-devel libboost_test1_66_0 libboost_test1_66_0-devel libqt5-qtbase-devel libqt5-qtsvg-devel libqt5-qttools-devel pthread-stubs-devel

Building from sources

1. Install CMake, gcc, g++ and developing packages of Xrender, fontconfig, pthread-stubs, X11, OpenGL (Mesa) from your repository. Developing packages are usually have -devel or -dev suffix.
   (Example of the package names on OpenSUSE: libXrender-devel, fontconfig-devel, pthread-stubs-devel, libX11-devel, Mesa-devel)
   See Qt Linux requirements article for more information

2. Download and unpack dependencies sources

3. Configure some make environment variables:

   export LDFLAGS="-L/usr/local/lib -L/usr/local/lib64 -Wl,--rpath=/usr/local/lib -Wl,--rpath=/usr/local/lib64"
   export LD_LIBRARY_PATH=/usr/local/lib:/usr/local/lib64
   export CFLAGS="-fPIC"
   export CXXFLAGS="-fPIC"
   

4. Build libjpeg, zlib, then libpng and then libtiff with

   mkdir build; cd build
   ../configure
   make -j `nproc`
   sudo make install
   

5. Build Qt:

   mkdir build; cd build
   ../configure -platform linux-g++ -release -shared \
   -system-zlib -system-libpng -system-libjpeg -system-freetype \
   -skip qt3d -skip qtactiveqt -skip qtandroidextras -skip qtcanvas3d -skip qtcharts -skip qtconnectivity \
   -skip qtdatavis3d -skip qtdeclarative -skip qtdoc -skip qtimageformats -skip qtgamepad -skip qtgraphicaleffects \
   -skip qtlocation -skip qtmacextras -skip qtmultimedia -skip qtnetworkauth -skip qtpurchasing -skip qtquickcontrols \
   -skip qtquickcontrols2 -skip qtremoteobjects -skip qtscript -skip qtscxml -skip qtsensors \
   -skip qtspeech -skip qtvirtualkeyboard -skip qtwayland -skip qtwebchannel \
   -skip qtwebengine -skip qtwebsockets -skip qtwebview -skip qtwinextras -skip qtxmlpatterns \
   -nomake examples -nomake tests -opensource -confirm-license -no-ltcg
   make -j `nproc`
   sudo make install
   

   After building and installing copy findqt.sh and findqt.csh into /etc/profile.d/ folder then enter sudo . ~/.profile && . /etc/profile in console to apply the changes made instantly or add Qt into PATH yourself.

6. Build boost:

   mkdir build
   ./bootstrap.sh
   ./b2 --build-dir=build -q --with-test toolset=gcc link=shared threading=multi -j `nproc` stage
   sudo ./b2 --build-dir=build -q --with-test toolset=gcc link=shared threading=multi install
   

Building ScanTailor

1. Navigate to the scantailor-advanced-x.x.x directory (cd "<dir>") and enter:

   mkdir build; cd build
   cmake -G "Unix Makefiles" --build ..
   make -j `nproc`
   

2. Optionally, install ScanTailor Advanced with:

   sudo make install
   

   Note: you can use sudo make uninstall from the build dir to uninstall ScanTailor Advanced later.

macOS

Use this repository: https://github.com/yb85/scantailor-advanced-osx

Packaging

1. Build ScanTailor Advanced following the instructions above

2. Use cpack -G <generator> [-D <var>=<value> ...] to create the package for your platform.

   Enter cpack --help to see the options and generators available.
   See the list of available variables for each generator here.

   Examples:

   1. To create a Linux DEB package use: cpack -G "DEB"
   2. To create a Linux RPM package use: cpack -G "RPM"
      Note: rpm-build package has to be installed.
   3. To create an installer for Windows use: cpack -G "NSIS"
      Note: NSIS has to be installed.

scantailor-libs-build's Issues

libtiff\tif_lzma.c:37:18: fatal error: lzma.h: No such file or directory

I received fatal error trying to run mingw32-make -j. Do you have a suggestion I can try.

mingw32-make.log
tiff410-dirlist.txt

CMake error despite all dependencies being installed

There is an issue in Ubuntu 18.04 and systems based on it (including the very popular Linux Mint 19.3): after installing the all the dependencies and compilers and doing cmake -G "Unix Makefiles" --build .., the compiler throws a bunch of errors like

-- The C compiler identification is GNU 7.5.0
-- The CXX compiler identification is GNU 7.5.0
-- Check for working C compiler: /usr/bin/cc
-- Check for working C compiler: /usr/bin/cc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Detecting C compile features
-- Detecting C compile features - done
-- Check for working CXX compiler: /usr/bin/c++
-- Check for working CXX compiler: /usr/bin/c++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Found JPEG: /usr/lib/x86_64-linux-gnu/libjpeg.so
-- Found ZLIB: /usr/lib/x86_64-linux-gnu/libz.so (found version "1.2.11"
-- Found PNG: /usr/lib/x86_64-linux-gnu/libpng.so (found version "1.6.34")
-- Found TIFF: /usr/lib/x86_64-Linux-gnu/Libtiff.so (found version "4.0.9")
-- Boost version: 1.65.1
-- Found the following Boost libraries:
--   unit_test_framework
--   prg_exec_monitor
-- Looking for pthread.h
-- Looking for pthread.h - found
-- Looking for pthread create
-- Looking for pthread create - not found
-- Check if compiler accepts -pthread
-- Check if compiler accepts -pthread - yes
-- Found Threads: TRUE
-- Configuring done

CMake Error at src/core/CMakeLists.txt:120 (add library):
  Target "core" links to target "JPEG::JPEG" but the target was not found.
  Perhaps a find package() call is missing for an IMPORTED target, or an
  ALIAS target is missing?

CMake Error at src/core/interaction/CMakeLists.txt:14 (add_library):
  Target "interaction" links to target "JPEG::JPEG" but the target was not
  found. Perhaps a find package() call is missing for an IMPORTED target, or
  an ALIAS target is missing?

The version of CMake that is proposed in the repositories for Ubuntu-18.04-based distributions is 3.10, and it is probably slightly broken, so what helped—and what is currently outside the scope of this tutorial and what a strongly recommend to the ‘Troubleshooting’ section is the following:
— If CMake produces errors complaining about not finding targets despite all libraries with development headers already being present in the system, then remove CMake (sudo apt remove cmake cmake-data) and compile CMake from sources:

cd cmake-3.17.1/
./bootstrap --parallel=2 -- -DCMAKE_BUILD_TYPE:STRING=Release
make -j2
make install

(or replacing the last line with sudo checkinstall --fstrans=no for easier uninstallation even when the sources are gone), and after that, CMake should find all libraries and compile scantailor-advanced without a hindrance.

Build with MinGW64 fails on tiff.h

In file included from C:\scantailor\libs\tiff-4.0.4\libtiff\tif_fax3sm.c:3:
C:\scantailor\libs\tiff-4.0.4\libtiff\tiff.h:77:23: error: expected '=', ',', ';', 'asm' or 'attribute' before 'int64'
typedef TIFF_INT64_T [ 79%] int64;
Building C object CMakeFiles/tiff.dir/C_/scantailor/libs/tiff-4.0.4/libtiff/tif_jbig.c.obj
^~~~~
C:\scantailor\libs\tiff-4.0.4\libtiff\tiff.h:78:23: error: expected '=', ',', ';', 'asm' or 'attribute' before 'uint64'
typedef TIFF_UINT64_T uint64;
^~~~~~
C:\scantailor\libs\tiff-4.0.4\libtiff\tiff.h:107:2: error: unknown type name 'uint64'
uint64 tiff_diroff; /* byte offset to first directory */
^~~~~~
[ 80%] Building C object CMakeFiles/tiff.dir/C_/scantailor/libs/tiff-4.0.4/libtiff/tif_jpeg.c.obj
[ 81%] Building C object CMakeFiles/tiff.dir/C_/scantailor/libs/tiff-4.0.4/libtiff/tif_jpeg_12.c.obj
mingw32-make[2]: *** [CMakeFiles\tiff.dir\build.make:245: CMakeFiles/tiff.dir/C_/scantailor/libs/tiff-4.0.4/libtiff/tif_fax3sm.c.obj] Error 1
mingw32-make[2]: *** Waiting for unfinished jobs....
mingw32-make[1]: *** [CMakeFiles\Makefile2:230: CMakeFiles/tiff.dir/all] Error 2
mingw32-make: *** [Makefile:83: all] Error 2

C:\scantailor\libs\scantailor-libs-build-master\build>mingw64-make -j %NUMBER_OF_PROCESSORS%
'mingw64-make' is not recognized as an internal or external command,
operable program or batch file.

boost_unit_test_framework not found

I am trying to compile scantailor-advanced, but I get this error:

--   libboost_unit_test_framework.so.1.70.0 (shared,
BUILD_SHARED_LIBS not ON, set Boost_USE_STATIC_LIBS=OFF to override)
CMake Error at /usr/lib64/cmake/Boost-1.70.0/BoostConfig.cmake:95
(find_package):
  Found package configuration file:

   
/usr/lib64/cmake/boost_unit_test_framework-1.70.0/boost_unit_test_framework-config.cmake

  but it set boost_unit_test_framework_FOUND to FALSE so package
  "boost_unit_test_framework" is considered to be NOT FOUND.  Reason
given by
  package:

  No suitable build variant has been found.

Call Stack (most recent call first):
  /usr/lib64/cmake/Boost-1.70.0/BoostConfig.cmake:124
(boost_find_dependency)
  /usr/share/cmake-3.14/Modules/FindBoost.cmake:266 (find_package)
  CMakeLists.txt:276 (find_package)


-- Configuring incomplete, errors occurred!
See also
"/tmp/SBo/scantailor-advanced-1.0.16/build/CMakeFiles/CMakeOutput.log".

upload a zip file with te depedencies

hey i wanna test if i can make a combination with scantailor advance and experimental , i did not figure out how to make a build ,can somebody upload a zip file with the dependencies in mega upload or somewhere

"unix makefiles" problem I believe

Strangely enough, now 'Unix Makefiles' as a generator no longer works for me. Yet I see no recent changes. On the same computer I had managed to install it, now I can't.
Attached is the log
Uploading CMakeOutput.log…

Building ScanTailor with mingw cmake error

C:\scantailor\sources\build>cmake -G "MinGW Makefiles" --build ..
-- The C compiler identification is GNU 8.1.0
-- The CXX compiler identification is GNU 8.1.0
-- Check for working C compiler: C:/mingw64/mingw64/bin/gcc.exe
-- Check for working C compiler: C:/mingw64/mingw64/bin/gcc.exe -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Detecting C compile features
-- Detecting C compile features - done
-- Check for working CXX compiler: C:/mingw64/mingw64/bin/g++.exe
-- Check for working CXX compiler: C:/mingw64/mingw64/bin/g++.exe -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Detecting CXX compile features
-- Detecting CXX compile features - done
CMake Error at C:/Program Files/CMake/share/cmake-3.15/Modules/FindPackageHandleStandardArgs.cmake:137 (message):
Could NOT find Boost (missing: unit_test_framework prg_exec_monitor) (found
suitable version "1.70.0", minimum required is "1.60")
Call Stack (most recent call first):
C:/Program Files/CMake/share/cmake-3.15/Modules/FindPackageHandleStandardArgs.cmake:378 (_FPHSA_FAILURE_MESSAGE)
C:/Program Files/CMake/share/cmake-3.15/Modules/FindBoost.cmake:2142 (find_package_handle_standard_args)
CMakeLists.txt:276 (find_package)

-- Configuring incomplete, errors occurred!
See also "C:/scantailor/sources/build/CMakeFiles/CMakeOutput.log".

Building `scantailor-advanced` on Fedora 39

Hey everyone, I just thought I'd post this as a reference for anyone trying to build scantailor-advanced on Fedora. It differs from the docs in the README, so it might save you some time.

# install dependencies
sudo dnf install -y \
    zlib gcc gcc-c++ cmake libjpeg-turbo-devel libpng-devel \
    libtiff libtiff-devel boost-test boost-devel \
    qt5-qtbase-devel qt5-qtsvg-devel qt5-qttools qt5-qttools-devel \
    libglvnd-devel libxcb-devel

# installable version
mkdir build; cd build
cmake -G "Unix Makefiles" ..
cmake --build .
make -j $(($(nproc)-1))
sudo make install # to install
sudo make uninstall # to uninstall

# variant: portable version
mkdir build; cd build
cmake -D PORTABLE_VERSION=ON -G "Unix Makefiles" ..
cmake --build .
make -j $(($(nproc)-1))
./scantailor # to run

NOTE: The README says you should run make -j $(nproc), but @sixtyfive mentioned that on most machines, it is better to keep one thread for I/O by running make -j $(($(nproc)-1)) instead.

Typo in Linux build command?

On Ubuntu 18.04 this command is not valid:

cmake -G "Unix Makefiles" --build ..

The double-dash on the build token seems spurious and it works without it, e.g.:

cmake -G "Unix Makefiles" build ..

nproc

On most machines it'll be better to keep one thread for I/O, so make -j $(($(nproc)-1)).

Build with MinGW64 fails to find libpng config.h

MinGW version: 8.1.0, x86_64, posix/seh
Msys2 version: 20180531
CMake version: 3.11.4
libpng version: 1.6.32

Full transcript of cmd.exe:

C:\ScanTailor Build\libs\scantailor-libs-build-master\build>cmake -G "MinGW Makefiles" --build ..
-- The C compiler identification is GNU 8.1.0
-- The CXX compiler identification is GNU 8.1.0
-- Check for working C compiler: C:/mingw64/bin/gcc.exe
-- Check for working C compiler: C:/mingw64/bin/gcc.exe -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Detecting C compile features
-- Detecting C compile features - done
-- Check for working CXX compiler: C:/mingw64/bin/g++.exe
-- Check for working CXX compiler: C:/mingw64/bin/g++.exe -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Configuring done
CMake Error at CMakeLists.txt:210 (add_library):
Cannot find source file:

C:/ScanTailor Build/libs/libpng-1.6.32/config.h

Tried extensions .c .C .c++ .cc .cpp .cxx .cu .m .M .mm .h .hh .h++ .hm
.hpp .hxx .in .txx

CMake Error at CMakeLists.txt:210 (add_library):
No SOURCES given to target: png

-- Build files have been written to: C:/ScanTailor Build/libs/scantailor-libs-build-master/build

---

I am admittedly new to compiling sources properly, but I followed the guide to the letter, using both MinGW and MSVC, and both failed. The issue with MinGW seemed to be simpler, so I posted this first. I will follow up with an issue report on MSVC.

Thanks so much for continuing to work on ScanTailor. That little program has saved me a lot of time and headache, and I'm hoping ScanTailor Advanced will be even better in that regard.

How the heck do you build this?

All I want is STA, I am willing to get this going, but I have no clue how to run these scripts let alone find them. Do I run them in cmd or ming or msys or Git bash? I am absolutely lost. I dont code. I scan. I would be ever so grateful if someone who at least break it down for me like a 5 year old because thats about the level of git experience I have.

Cmake Error

`-- Boost version: 1.65.1
-- Found the following Boost libraries:
-- unit_test_framework
-- prg_exec_monitor
CMake Error at CMakeLists.txt:193 (add_compile_definitions):
Unknown CMake command "add_compile_definitions".

-- Configuring incomplete, errors occurred!`

My setup:

Ubuntu 18.04
cmake version 3.10.2

Dependencies versions: apt-cache showpkg gcc-7 g++-7 cmake libjpeg-dev libpng-dev libtiff5 libtiff5-dev libboost-test1.65-dev libboost-test1.65.1 qtbase5-dev libqt5svg5-dev qttools5-dev qttools5-dev-tools libqt5opengl5-dev libpthread-stubs0-dev | grep -B1 -A1 Versions gives

Package: gcc-7
Versions:
7.5.0-3ubuntu1~18.04 (/var/lib/apt/lists/de.archive.ubuntu.com_ubuntu_dists_bionic-updates_main_binary-amd64_Packages) (/var/lib/apt/lists/security.ubuntu.com_ubuntu_dists_bionic-security_main_binary-amd64_Packages) (/var/lib/dpkg/status)

Package: g++-7
Versions:
7.5.0-3ubuntu1~18.04 (/var/lib/apt/lists/de.archive.ubuntu.com_ubuntu_dists_bionic-updates_main_binary-amd64_Packages) (/var/lib/apt/lists/security.ubuntu.com_ubuntu_dists_bionic-security_main_binary-amd64_Packages) (/var/lib/dpkg/status)

Package: cmake
Versions:
3.10.2-1ubuntu2.18.04.1 (/var/lib/apt/lists/de.archive.ubuntu.com_ubuntu_dists_bionic-updates_main_binary-amd64_Packages) (/var/lib/dpkg/status)

Package: libjpeg-dev
Versions:
8c-2ubuntu8 (/var/lib/apt/lists/de.archive.ubuntu.com_ubuntu_dists_bionic_main_binary-amd64_Packages) (/var/lib/dpkg/status)

Package: libpng-dev
Versions:
1.6.34-1ubuntu0.18.04.2 (/var/lib/apt/lists/de.archive.ubuntu.com_ubuntu_dists_bionic-updates_main_binary-amd64_Packages) (/var/lib/apt/lists/security.ubuntu.com_ubuntu_dists_bionic-security_main_binary-amd64_Packages) (/var/lib/dpkg/status)

Package: libtiff5
Versions:
4.0.9-5ubuntu0.3 (/var/lib/apt/lists/de.archive.ubuntu.com_ubuntu_dists_bionic-updates_main_binary-amd64_Packages) (/var/lib/apt/lists/security.ubuntu.com_ubuntu_dists_bionic-security_main_binary-amd64_Packages) (/var/lib/dpkg/status)

Package: libtiff5-dev
Versions:
4.0.9-5ubuntu0.3 (/var/lib/apt/lists/de.archive.ubuntu.com_ubuntu_dists_bionic-updates_main_binary-amd64_Packages) (/var/lib/apt/lists/security.ubuntu.com_ubuntu_dists_bionic-security_main_binary-amd64_Packages) (/var/lib/dpkg/status)

Package: libboost-test1.65-dev
Versions:
1.65.1+dfsg-0ubuntu5 (/var/lib/apt/lists/de.archive.ubuntu.com_ubuntu_dists_bionic_universe_binary-amd64_Packages) (/var/lib/dpkg/status)

Package: libboost-test1.65.1
Versions:
1.65.1+dfsg-0ubuntu5 (/var/lib/apt/lists/de.archive.ubuntu.com_ubuntu_dists_bionic_universe_binary-amd64_Packages) (/var/lib/dpkg/status)

Package: qtbase5-dev
Versions:
5.9.5+dfsg-0ubuntu2.5 (/var/lib/apt/lists/de.archive.ubuntu.com_ubuntu_dists_bionic-updates_main_binary-amd64_Packages) (/var/lib/apt/lists/security.ubuntu.com_ubuntu_dists_bionic-security_main_binary-amd64_Packages) (/var/lib/dpkg/status)

Package: libqt5svg5-dev
Versions:
5.9.5-0ubuntu1 (/var/lib/apt/lists/de.archive.ubuntu.com_ubuntu_dists_bionic_main_binary-amd64_Packages) (/var/lib/dpkg/status)

Package: qttools5-dev
Versions:
5.9.5-0ubuntu1 (/var/lib/apt/lists/de.archive.ubuntu.com_ubuntu_dists_bionic_universe_binary-amd64_Packages) (/var/lib/dpkg/status)

Package: qttools5-dev-tools
Versions:
5.9.5-0ubuntu1 (/var/lib/apt/lists/de.archive.ubuntu.com_ubuntu_dists_bionic_universe_binary-amd64_Packages) (/var/lib/dpkg/status)

Package: libqt5opengl5-dev
Versions:
5.9.5+dfsg-0ubuntu2.5 (/var/lib/apt/lists/de.archive.ubuntu.com_ubuntu_dists_bionic-updates_main_binary-amd64_Packages) (/var/lib/apt/lists/security.ubuntu.com_ubuntu_dists_bionic-security_main_binary-amd64_Packages) (/var/lib/dpkg/status)

Package: libpthread-stubs0-dev
Versions:
0.3-4 (/var/lib/apt/lists/de.archive.ubuntu.com_ubuntu_dists_bionic_main_binary-amd64_Packages) (/var/lib/dpkg/status)

scantailor-libs-build run script error

The problem occurs in the run script. The following three output the same error:
libpng-1.6.37
jpeg-9b
tiff-4.0.10
configure: error: no acceptable C compiler found in $ PATH

Error in Building ScanTailor

Trying to build in a windows- 7 system
Building dependencies

• done successfully
  Building ScanTailor
• cmake -G "MinGW Makefiles" --build ..

Output:
-- The C compiler identification is GNU 8.1.0
-- The CXX compiler identification is GNU 8.1.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: C:/Program Files/mingw-w64/i686-8.1.0-posix-dwarf-rt_v6-rev0/mingw32/bin/gcc.exe - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Check for working CXX compiler: C:/Program Files/mingw-w64/i686-8.1.0-posix-dwarf-rt_v6-rev0/mingw32/bin/g++.exe - skipped
-- Detecting CXX compile features
-- Detecting CXX compile features - done
CMake Error at C:/Program Files/CMake/share/cmake-3.18/Modules/FindPackageHandleStandardArgs.cmake:165 (message):
Could NOT find JPEG (missing: JPEG_LIBRARY) (found version "90")
Call Stack (most recent call first):
C:/Program Files/CMake/share/cmake-3.18/Modules/FindPackageHandleStandardArgs.cmake:458 (_FPHSA_FAILURE_MESSAGE)
C:/Program Files/CMake/share/cmake-3.18/Modules/FindJPEG.cmake:100 (find_package_handle_standard_args)
CMakeLists.txt:131 (find_package)

Please help to solve........