Tortilla8 is a collection of Chip8 tools for per-processing, assembling, emulating, disassembling, and visualizing Chip8 ROMs.
Chip8 is a language published in 1978 via the RCA COSMAC VIP Instruction Manual that was bosted as making game programming easier for hobbiests on the system. Chip8 is popular to emulate due to its simplicity and the now extensive amount of documentation. Unfortunately there are some issues with Chip8 emulations, notably that there were differing implementations early on. These differences have been very well documented here. Some of these isuses are addressed in tortilla8, but some are not as I have yet to encounter them for myself.
- No docs for modules
- Platter: keypad input could be better
- Platter: controls can't be edited
- Platter: rewinding while waiting for key input (ld reg, k) causes odd behavior
- Jalapeno: does not remove extra whitespace due to removing 'junk' lines
- Nacho: still under development
Setup is strait forward, two dependencies are used for the text based gui (platter), Simple Audio and Curses, the later of which is discussed in detail below for specifc OSes.
# If you haven't installed pip, do that
python -m pip install -U pip setuptools
# Navigate to the root of the package
# Install tortiall8
pip install .
# Install Simple Audio (optional)
pip install simpleaudio
After insallation you can pre-processes, assemble, and emulate the any of the provided ROMs (or your own) by...
tortilla8 pre-process roms/vertical_stripes.asm
tortilla8 assemble roms/vertical_stripes_pp.asm -o roms/demo
tortilla8 emulate roms/demo.ch8 -f 150
You can also start Nacho (the tkinter based GUI) by invoking tortilla8 without arguments.
The main entry point after install is tortilla8, which has five options: assemble, disassemble, pre-process, execute, and emulate. More information for each can be found via tortilla8's help menus.
usage: tortilla8 [-h] {pre-process,assemble,disassemble,execute,emulate} ...
A collection of Chip8 tools for pre-processing, assembling, emulating,
disassembling, and visualizing Chip8 ROMs. Call with no arguments to start the
tortilla8 GUI, Nacho!
positional arguments:
{pre-process,assemble,disassemble,execute,emulate}
Options for tortilla8...
pre-process Scan your CHIP-8 source code for pre-processor
directives, apply them as needed, and produce a
flattend source file. Respected Directives are:
'ifdef', 'ifndef', 'elif', 'elseif',
'elifdef','elseifdef', 'endif', 'else', 'equ', '='.
Currently, no mode modifers ('option', 'align' etc)
are respected.
assemble Assemble your CHIP-8 programs to executable machine
code. Listing files and comment-striped files can also
be generated. Arguments to mnemonics must be either be
integers in decimal or hex using '#' as a prefix. Data
declares may also be prefixed with '$' to denote
binary (i.e. '$11001100' or '$11..11..').
disassemble Dissassemble a Chip8 ROM, any byte pair that is not an
instruction is assumed to be a data declaration. No
checks are performed to insure the program is valid.
execute Execute a rom to quickly check for errors. The program
counter, hex instruction (the two bytes that make up
the opcode), and mnemonic are printed to the screen
immediately after the execution of that operation
code. All errors (info, warning, and fatal) are
printed to screen.
emulate Start a text (unicode) based Chip8 emulator which
disaplys a game screen, all registers, the stack,
recently processed instructions, and a console to log
any issues that occur.
optional arguments:
-h, --help show this help message and exit
A lexer/tokenizer used by blackbean and jalapeno for individual lines of Chip8 assembly. The initialiser does the tokenizing, the class is then used as a data container that can be populated later for information only the assembler or pre-proccessor would know.
Pre-Processor used to flatten files before running them through blackbean. Currently strips "mode" and "option" directives without respecting them. Repects options such as "if" and "else".
An assembler that can generate Chip8 roms, comment-stripped Chip8 assembly, or a listing file (asm with memory addresses). The assembler makes no attempt to insure that illegal calls are not made or that the VF register isn't set.
Disassembler function for two bytes worth of data. If the input is not a valid instruction then it is assumed to be a data declaration.
Emulator for the Chip8 language/system. The emulator has no display, for that you should use platter or nacho. There are currently no known major bugs in guacamole, however there are oddoties in Chip-8 in general (see abve in the 'What is Chip8' section). Guacamole makes use of two other modules: 'emulation_error' which houses a simple enum to determine the severity of an error that occured within the emulation and not one raised by python, and 'instructions' which contains a function for every Chip-8 opcode.
Text based GUI for Guacamole that requires curses and simpleaudio, see below for any issues with your OS. Display information, warnings, and fatal errors reported by the emulator along with all registers, the stack, and recently executed instructions. Detects when the emulator enters a "spin" state and gives the option of reseting. Press the underlined (on GNU/Linux) or uppercase (Mac/Windows) to perform the menu actions (i.e. Stepping through the program, exiting) and use the arrow keys to control the rewind size (Left/Right) and emulation target frequency (Up/Down).
Tkinter based GUI for easily playing Chip8 that is still being developed. If you have an issue using sound in Nacho on GNU/Linux, speciffically with installing SimpleAudio, please try to install both the python3 dev tools and the libasound dev libraray.
apt install python3-dev
apt install libasound2-dev
The Curses module ships with your python install, I have had no issues thus far. Some terminals will not correctly display some unicode characters, you can use either use the '-u' flag to disable unicode if that is the case.
Python for Windows does not ship with Curses, which is needed by platter, so you'll need install the wheel package yourself from here. The 'cp34' (CPython 3.4) was tested on Windows 7. Once the package is downloaded, just cd to the directory and install via pip.
:: If you haven't installed Wheel, do that
pip install wheel
:: Install Curses for win32
python -m pip install curses-2.2-cp34-none-win32.whl
Unfortunately the windows version of curses doesn't support unicode, so the game display in Platter is 'unique'.
The Curses module ships with your python install, however the mac default terminal does not correctly display unicode underline characters. Instead a version is shown where the uppercase letters are the hot-keys to perform the action.
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent