adafruit/adafruit-pi-cam

Camera project for Raspberry Pi + camera + Adafruit PiTFT

adafruit-pi-cam

Camera project for Raspberry Pi + camera + Adafruit PiTFT By PaintYourDragon (Phil B) for Adafruit Industries

Read how to build this project over at http://learn.adafruit.com/diy-wifi-raspberry-pi-touch-cam Enjoy!

adafruit-pi-cam's Issues

Stuck on "Working..." when taking photo

Taking a photo gets stuck on "Working..." with a spinner.

Calibration issue

I am curious on how the app is consuming its calibration settings. I can launch X11 and my display is fine but once I launch the app the touchscreen is all screwed up. I even enabled the mouse to see where my selections were going and it jumps all over the screen, nothing indicating that it thinks the display is upside down or reversed.

Resolution is lower

Hi,
i Have screen touch with 480x320, and the image of the camera is always in the left corner more small than the screen size... How can i put full size?? what is wrong in my raspberry 2?

I use noir Camera

picamera.exc.PiCameraError: Failed to create camera component: Out of memory

Like the title says. When I run
sudo python cam.py
I get
picamera.exc.PiCameraError: Failed to create camera component: Out of memory

Request - Shutter Release Button

Use of the one or more of the GPIO buttons as shutter release.

is there any code for adafruit 3.5 inch display

i am using adafruit 3.5 inch display and i want pi cam full screen preview

its not working for ada fruit 3.5 inch display

for adafruit 3.5 inch display the camera preview is not coming on full screen . its just covering the top corner. any help????/

Full screen don't work on 480x320 screen

The app works on left top corner and only the shutter area work on touch screen.
I can't exit the app and open settings.
What i need to change (code or rasp settings) to set it to fill the screen and works ok?
Thank you.

Touch position only recognised

Running most recent Raspbian (2019-09-26) with Python 3.7.3 touch events are not correcly recognised. The reported touch position will only ever be registered at the edges of the display.

I found adding pygame.mouse.set_visible(True) just before while True in main loop can solve the problem.

adafruit-pi-cam - error in line 567

Turotial for this app is grat! but,....at the beginning an explanation.
I use a 3.2 "LCD (LCD-PI32), because I'm waiting for Adafruit PiTFT LCD when it will be on sale.

The installation went without problems, but when I type the command
sudo python cam.py get an error message.:

"File cam.py, line 567, in module pygame.mouse.set_visible (False)
pygame.error: video system not initialized

is there any solution for this?

and last one - I'm not a I'm not an advanced user

Regards,
Lukasz

yuv2rgb.so with python3 error

ImportError: /home/pi/adafruit-pi-cam-master/yuv2rgb.so: undefined symbol: Py_InitModule