-
Addons: What were previously called "Plugins" in Forge 1, are now "Addons" in Forge 2. This decision was made to clear up confusing verbiage like, "Plugin X has N Plugins" (due to the org.jboss.forge.plugins.Plugin interface.)
-
Modular Container fully rewritten: The Forge runtime is now a fully functional Java module system based on JBoss Modules (The same engine behind JBoss AS 7+ and JBoss EAP). This means you may now pick-and-choose which addons are important for you.
-
Smaller, leaner, and faster: Forge 2 now sports a slimmer four megabyte download size, and starts up in under three seconds. (Compared to upwards of 10+ seconds for Forge 1)
-
Better IDE Integration: Forge 2 addons have been de-coupled from the command line, meaning you can create addons that run as wizards in the IDE, as well as commands in the shell - the same code works in both environments.
We are currently in the process of migrating Forge 1 to Forge 2, so expect to find some Forge 1 functionality missing in the early versions of Forge 2.
See the JavaDocs here
Forge 2 is packaged inside an Eclipse plugin and also as a standalone ZIP file. They are independent of each other.
-
Eclipse Update Site for Eclipse Luna (Eclipse 4.4) - http://download.jboss.org/jbosstools/builds/staging/jbosstools-forge_master/all/repo/
-
Command line tools
Getting started with the command line tools is easy:
-
Download a distribution
-
Download JBoss Forge - Offline (Recommended)
-
This ZIP contains the Forge runtime + Core Addons
-
-
Download JBoss Forge - No Addons
-
This ZIP contains the Forge runtime only
-
-
-
Extract the ZIP to a directory and navigate to forge-distribution-VERSION/bin directory
-
Execute forge by running
forge
Forge is now ready to go.
Install the required addons by running the following commands:
forge --install groupId:artifactId,version
-
Forge will install the required dependencies for each addon.
Important
|
Make sure your settings.xml is properly configured to use the Maven central repository or, if you wish to use a SNAPSHOT version from a core addon, the JBoss Nexus Repository, otherwise the installation will fail. Instructions on how to setup your settings.xml can be found on https://community.jboss.org/wiki/MavenGettingStarted-Developers |
If you wish to install the core addons including the shell, "Project: New", the "Java EE" commands, and all other provided functionality, you should run the following command:
forge --install core
If you only wish to install the prototype Forge 2 Shell based on Aesh, run the following command instead:
forge --install shell
If you wish to remove any addon, you can use the following command:
forge --remove groupId:artifactId,version
Forge 2 is known to work with Eclipse Luna (Eclipse 4.4) or higher versions. Older versions of Eclipse are not supported.
-
Install the JBoss Tools Usage Reporting plugin, available in http://download.jboss.org/jbosstools/updates/development/luna/ and restart Eclipse
-
Install the Forge 2 Eclipse Plugin from http://download.jboss.org/jbosstools/builds/staging/jbosstools-forge_master/all/repo/ and restart Eclipse
This plugin starts the Forge 2 Container and your installed addons, so you can use them directly in your workspace
-
Press Ctrl + 4 to show the installed addons that you may interact with (these addons use the UI addon, hence providing a user interface - see Developing an UI Addon for more details).
Addon name | Included in Eclipse Plugin ? |
---|---|
yes |
|
yes |
|
yes |
|
yes |
|
yes |
|
yes |
|
yes |
|
yes |
|
yes |
|
yes |
|
yes |
|
yes |
|
yes |
|
yes |
|
yes |
|
yes |
|
yes |
|
yes |
|
yes |
|
yes |
|
yes |
Forge addons are simple Maven projects with a special classifier "forge-addon". This classifier is used while installing an addon so the Furnace container can calculate its dependencies, freeing you from Classloader hell.
One of the most important things to know about developing a Forge addon, is that the Furnace runtime container (the core of Forge),
is actually an embeddable, modular Java container. This means that each addon has its own ClassLoader
and that
addons share classes from each other, in addition to supplying their own local classes. Furnace builds a graph of
addon dependencies at runtime, and automatically calculates which addons should see classes from other addons.
For now, however, just treat your first addon as if it were any other Java project. The differences between a "modular" and "traditional" environment are not as great as you might think, and the Furnace development model has been created in a way that should make these differences seem natural, almost transparent.
Forge Addons must be JARs published with a 'forge-addon' classifier. Add this plugin configuration to your pom.xml:
<build>
<plugins>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-jar-plugin</artifactId>
<executions>
<execution>
<id>create-forge-addon</id>
<phase>package</phase>
<goals>
<goal>jar</goal>
</goals>
<inherited>false</inherited>
<configuration>
<classifier>forge-addon</classifier>
</configuration>
</execution>
</executions>
</plugin>
</plugins>
</build>
In order to use CDI and services from other addons in your addon, you’ll need to reference the Furnace CDI container addon as a dependency your pom.xml file:
<dependency>
<groupId>org.jboss.forge.furnace.container</groupId>
<artifactId>cdi</artifactId>
<classifier>forge-addon</classifier>
<scope>provided</scope>
</dependency>
Caution
|
Addon dependencies MUST be declared in the Maven pom.xml that produces your forge-addon classified artifact; otherwise, Furnace will NOT use this dependency as a forge-addon . Instead, addon dependencies declared via transitive dependencies will be included as local JAR files and re-bundled with your addon. More than likely, re-bundling a forge-addon in your Addon is NOT what you want.
|
Your complete POM should now look something like this:
<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
<modelVersion>4.0.0</modelVersion>
<groupId>com.example</groupId>
<artifactId>example</artifactId>
<version>0.0.1-SNAPSHOT</version>
<name>My First Addon</name>
<dependencies>
<dependency>
<groupId>org.jboss.forge.furnace.container</groupId>
<artifactId>cdi</artifactId>
<classifier>forge-addon</classifier>
<scope>provided</scope>
</dependency>
</dependencies>
<build>
<plugins>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-jar-plugin</artifactId>
<executions>
<execution>
<id>create-forge-addon</id>
<phase>package</phase>
<goals>
<goal>jar</goal>
</goals>
<inherited>false</inherited>
<configuration>
<classifier>forge-addon</classifier>
</configuration>
</execution>
</executions>
</plugin>
</plugins>
</build>
</project>
A service is implemented as a POJO (Plain Old Java Object):
public class ExampleServiceImpl
{
public String doSomething() {
// Do stuff...
}
}
However, best practices favor creating a service interface, otherwise consumers will be required to request your specific service implementation. For example:
public interface ExampleService
{
public String doSomething();
}
Then simply implement the service interface:
public class ExampleServiceImpl implements ExampleService
{
public String doSomething() {
// Do stuff...
}
}
Forge has a modular architecture that enables you to re-use functionality from other addons, directly in your own addon code. In order to achieve this, you must add addon-dependencies in your pom.xml
file.
<project>
...
<dependencies>
<!-- Addon Dependencies -->
<dependency>
<groupId>org.jboss.forge.addon</groupId>
<artifactId>resources</artifactId>
<classifier>forge-addon</classifier>
<scope>provided</scope>
</dependency>
<dependency>
<groupId>org.jboss.forge.addon</groupId>
<artifactId>ui</artifactId>
<classifier>forge-addon</classifier>
<scope>provided</scope>
</dependency>
<!-- Furnace Container -->
<dependency>
<groupId>org.jboss.forge.furnace.container</groupId>
<artifactId>cdi</artifactId>
<classifier>forge-addon</classifier>
<scope>provided</scope>
</dependency>
</dependencies>
...
</project>
There is a simple rule that will make this an easy decision:
"`compile` if everyone knows,
provided
if I know,runtime
if nobody knows."
To explain, if you never publicly expose types (classes, interfaces, etc…) from another addon in the outward-facing APIs of your addon, then you should include
that addon as provided
scope. If you do, however, expose classes from that addon in the public APIs of your code,
then that addon should be labeled as compile
scope (default,) which means that this dependency will be 'exported'
to consumers that depend on your addon.
Addon dependencies may also be made optional
if consumers of your addon should be able to choose whether or not
certain functionality is enabled, or if your addon behaves differently when other addons are already deployed to the
container.
The following chart explains this in detail. Assume that our addon depends on the resources
addon, which provides
the ResourceFactory
and FileResource
classes:
Example | Scope should be | Explanation |
---|---|---|
The public class InternalExample {
@Inject private ResourceFactory factory;
public void doSomething(File file) {
Resource<?> r = factory.create(file);
System.out.println("New resource: " + r)a
}
} |
|
Consumers of your addon never see classes or interfaces from the resources addon; it is only used internally as an implementation detail and is not exposed in your public API. Your addon should depend on the resources addon at |
The public class ExposedExample {
@Inject private ResourceFactory factory;
public Resource<?> doSomething(File file) {
Resource<?> r = factory.create(file);
return r;
}
} |
|
Consumers of your addon require classes from the Your addon should depend on the resources addon at |
The type public class LockCreator {
public void createFile(
@Observes PostStartup event)
{
File lock = new File("lockfile");
lock.createNewFile();
}
} Your addon defines public class LockConsumer {
public void deleteLock() {
File lock = new File("lockfile");
Assert.assertTrue(lock.exists());
}
} |
|
Your addon makes assumptions about the runtime environment that are satisfied by the presence of addon X, but your addon does not depend on or expose types from addon X in its APIs. Your addon should include addon X at |
The type public interface Logger {
public void log(String message)
} Your addon defines public class LoggerConsumer {
@Inject private Imported<Logger> loggers;
public void logEverything() {
for( Logger log : loggers {
log.log("Log for you!");
}
}
} |
|
Your addon requires instances of Your addon should include addon X at |
One of the most important concepts of writing a Forge addon is writing tests using the Furnace test harness. This allows you to test your code in an actual Furnace environment, and verify that things are behaving as expected. Typically we suggest using a separate project to test your addon in order to keep concerns separate, which tends to lead to cleaner code and fewer surprises.
For simplicity’s sake, we’ll assume that your addon uses the default Furnace container (org.jboss.forge.furnace.container:cdi
).
Add the following dependencies to your pom.xml file if they are not already there. Make sure that the Furnace versions are the same as the rest of your project.
<dependency>
<groupId>org.jboss.forge.furnace.test</groupId>
<artifactId>furnace-test-harness</artifactId>
<version>FURNACE_VERSION</version>
<scope>test</scope>
</dependency>
<dependency>
<groupId>org.jboss.forge.furnace.test</groupId>
<artifactId>arquillian-furnace-classpath</artifactId>
<version>FURNACE_VERSION</version>
<scope>test</scope>
</dependency>
If you are writing tests in a separate project or sub-project, you should also add a dependency to your addon, or to the addon you wish to test (you can test anything you like.)
<dependency>
<groupId>com.example</groupId>
<artifactId>example</artifactId>
<classifier>forge-addon</classifier>
<version>YOUR_VERSION</version>
<scope>test</scope>
</dependency>
Now, you’ll need to create a test class with the following layout, using the standard JUnit test APIs:
package org.example;
import org.jboss.arquillian.container.test.api.Deployment;
import org.jboss.arquillian.junit.Arquillian;
import org.jboss.forge.arquillian.archive.ForgeArchive;
import org.jboss.shrinkwrap.api.ShrinkWrap;
import org.junit.Assert;
import org.junit.Test;
import org.junit.runner.RunWith;
@RunWith(Arquillian.class)
public class ExampleFurnaceTest {
@Deployment
public static ForgeArchive getDeployment() {
ForgeArchive archive = ShrinkWrap.create(ForgeArchive.class);
return archive;
}
@Test
public void testSomething() throws Exception {
Assert.fail("Not implemented");
}
}
Then you’ll need to add some configuration so that your addon will be deployed to the test environment. This is done
using the @AddonDependency
annotation. You’ll also need to add an addon dependency link from your test case
to your addon (otherwise the test case will not be able to use any of your addon’s classes or services.)
@RunWith(Arquillian.class)
public class ExampleFurnaceTest {
@Deployment
@Dependencies({
@AddonDependency(name = "org.example:example", version = "YOUR_VERSION")
})
public static ForgeArchive getDeployment() {
ForgeArchive archive = ShrinkWrap.create(ForgeArchive.class)
.addBeansXML()
.addAsAddonDependencies(
AddonDependencyEntry.create("org.example:example", "YOUR_VERSION"),
);
return archive;
}
@Test
public void testSomething() throws Exception {
Assert.fail("Not implemented");
}
}
Note
|
The @Dependencies annotation is used to specify addons that must be deployed before the Addon-Under-Test is deployed in Furnace. The AddonDependencyEntry.create(…) method is used to specify addons that the Addon-Under-Test depends on.
|
Now that the test case deploys and depends on your addon, you may access services from it via injection:
@RunWith(Arquillian.class)
public class ExampleFurnaceTest {
@Deployment
@Dependencies({
@AddonDependency(name = "org.example:example", version = "YOUR_VERSION")
})
public static ForgeArchive getDeployment() {
ForgeArchive archive = ShrinkWrap.create(ForgeArchive.class)
.addBeansXML()
.addAsAddonDependencies(
AddonDependencyEntry.create("org.example:example", "YOUR_VERSION"),
);
return archive;
}
@Inject
private ExampleService service;
@Test
public void testSomething() throws Exception {
Assert.assertNotNull(service);
Assert.assertNotNull(service.doSomething());
}
}
This is the basic premise of using the test-harness. For detailed examples, take a look at some of the existing Forge test cases in our github repository.
Note
|
The version parameter in @AddonDependency and in the AddonDependencyEntry.create(…) method are optional. By not specifying them means that the test harness
will attempt to find the version based on the tests' build descriptor (pom.xml). In this case, if the dependent addon is not present in the tests' build descriptor, the test execution should fail.
|
Depending on the Forge environment in which you are running, installation steps will differ.
- For Eclipse
-
Open the Forge quick-assist menu, select either "Build and install an Addon" or "Install an addon" to build and install your project, or install a pre-built maven artifact.
- For the Shell
mvn clean install
Run
./forge --install yourgroupId:artifactId,version
Warning
|
This coordinate is NOT the same as Maven’s. You MUST use a comma (,) between the artifactId and the version.
|