adityaprao/mup---electronic-voting-machine

This is the project we did for our Microprocessor and Interfacing Course at BITS Pilani

MUP---Electronic-Voting-Machine

This is the project we did for our Microprocessor and Interfacing Course at BITS Pilani

Problem Statement : Design a microprocessor Voting Machine which has provision for 4 candidates. It should keep the count of total votes polled and the count of votes polled for each candidate. Before being put in use, it should check if all memory location allotted to candidates, and the total count are empty. If not, it should clear these as well as the display. To put it in use, it needs to be enabled by 4 polling agents and the Presiding officer. If anyone is missing it should not be enabled. After 8 hours (9 a.m. to 5 p.m.) it should stop taking input. There has to be a provision that the Presiding officer by pressing a code [‘CA’] can lock it in between & then can restart it by pressing [FØ]. For retrieving the count of each candidate provision should be there. The count of each candidate has to be send to a remote device using a serial interface. (Do not take into consideration the design of the remote device and its programming)

Project Includes the following Files

• MUPfinal.asm - 8086 based code for the EVM
• mupdesign.pdsprj - Proteus Implemenation of the EVM
• Report - Submitted to our course Instructor