akshaybaweja/component-tester

GUI for Component Tester

Component Tester

Resources

• Firmware Files
  • USB Component Tester
• Gerber Files (For PCB Production)
  • USB Component Tester

Screenshots (with TouchBar Support)

Welcome Screen - prompts user to select Serial Port of Component Tester to begin testing

Selecting Serial Port

Once the correct serial port is connected it shows up a TEST button on screen and as well as on TouchBar (only mac users). Also, shows the hardware version for Component Tester.

Testing Screens

---

Component Test Results

---

Install

macOS 10.10+, Linux, and Windows 7+ are supported (64-bit only).

macOS

Download the .dmg file.

Linux

Download the .AppImage or .deb file.

The AppImage needs to be made executable after download.

Windows

Download the .exe file.

---

Dev

Built with Electron.

Run

$ npm install
$ npm start

Publish

$ npm run release

After Travis finishes building your app, open the release draft it created and click "Publish".

component-tester's Issues

Regarding the WINDOWS software does not test the "button" problem

Hello, I built the circuit according to the schematic diagram you posted, and burned the HEX and EEP files provided by "https://hackaday.io/project/173922-usb-component-tester". The fuse uses lfusew:0xe2 /hfusew:0xd9/efusew :0xfc. Using the WINDOWS version of the Component Tester software, the problem now is that the serial port is selected, and the "test" button is not displayed on the software? I checked the circuit in detail, there is no problem and the principle you provided is unchanged. Please help me, thank you!

Full Screen Mode is unacceptable

Please, add normal mode