alex0161/um980_rpi_hat_rtkbase

RRK Base for RPI HAT ELT0229 on Unicore UM980

UM980_RPI_Hat_RtkBase

RTK Base for RPI HAT ELT0229/ELT0219 on Unicore UM980/UM982

Based on RtkBase

Easy installation:

• Connect your ELT0229/ELT0219 to your raspberry pi/orange pi/....

• Open a terminal and:

  wget https://raw.githubusercontent.com/GNSSOEM/UM980_RPI_Hat_RtkBase/main/install.sh
  chmod +x install.sh
  ./install.sh

• RTFM

Two phase installation:

• ./install.sh -1 for part of installation without receiver
• ./install.sh -2 for part of installation with receiver

main feature, added to RtkBase

• Full configure for Unicore receiver and RPI
• If mount and password are both TCP use TCP-client instead of NTRIP-server. It's need for rtkdirect.com
• Setup base position to Unicore receiver
• Timeout for PPP-solution is extended to 36 hours
• Add port 5017 for direct configure Unicore Receiver
• Default settings is adopted to Unicore receiver, onocoy.com and rtkdirect.com
• Windows RTK & HAS utilitis for precise resolving rtkbase position
• Zeroconf configuration as rtkbase.local in the local network

License:

UM980_RPI_Hat_RtkBase is licensed under AGPL 3 (see LICENSE file).

UM980_RPI_Hat_RtkBase uses RtkBase (GPL v3)