Controller for I-seg THQ Power Supply for HV test
Need Pyserial to be installed
Minimum Python V3
How to run :
py run_HV_test.py -v 5 -s 10 -e 100 -p 5
-v:entering voltage for USB interface
-s: Start voltage of test
-e: End Voltage of test
-p: Voltage step size
To change the thresold current: open run_HV_test.py and change "C1=0.5E-3" to desied value
0.5E-3 = 0.5 mA
for gui
click on run.cmd
Don't forget to turn on the remote mode and High voltage output in Power Supply