andrewn/diy-printer

Install

1. Follow the Getting Started istructions for your platform, until you get to "Running your first Container"
2. balena push <your-host-name>.local
3. sirius-client will be installed

Wiring

Printer

DST must be connected to ground Pi GND, Printer GND, Power supply -ve must all be connected

Disable console output on the serial port

1. balena ssh <your-host-name>.local
2. vi /mnt/boot/cmdline.txt
3. ESC -> : -> i to edit text
4. Delete: console=serial0,115200 So from: dwc_otg.lpm_enable=0 console=tty1 console=serial0,115200 rootfstype=ext4 rootwait To: dwc_otg.lpm_enable=0 console=tty1 rootfstype=ext4 rootwait
5. ESC -> : -> x to save and exit
6. If on a Pi3, carry on from step 2 below, else reboot

On a Pi 3

1. balena ssh <your-host-name>.local
2. vi /mnt/boot/config.txt
3. ESC -> Shift + G to skip to end of file
4. ESC -> : -> i to edit text
5. Add dtoverlay=pi3-miniuart-bt on a new line at the end
6. ESC -> : -> x to save and exit
7. reboot to restart the pi