📣 Apollo Federation 2 is generally available! View the Federation 2 demo!
Moving from dynamic composition to static composition with supergraphs.
Contents:
See also:
Apollo Federation and Managed Federation have delivered significant improvements over schema stitching and alternate approaches. Static composition introduces another big step forward as we move composition out of the Gateway and into the CI pipeline where federated graph changes can be validated sooner and built into static artifacts that define how a Gateway should route requests across the subgraphs in a federation.
Most contemporary federated GraphQL implementations dynamically compose a
list of implementing services (subgraphs) into a GraphQL Gateway at runtime.
There is no static artifact that can be versioned, validated, or reasoned
about across a fleet of Gateway instances that are common in scale-out
federated graph deployments. Gateways often rely on hard-coded behavior for
directives like join or accept additional non-GraphQL configuration.
With static composition, you can compose subgraphs into a supergraph at
build-time resulting in a static artifact (supergraph schema) that describes
the machinery to power a graph router at runtime. The supergraph schema
includes directives like join that instruct a graph router how federate
multiple subgraphs into a single graph for consumers to use.
See also: New Federation UX - Docs
You'll need:
- docker
- docker-compose
roverour new CLI
To install rover:
curl -sSL https://rover.apollo.dev/nix/latest | shSee also: Apollo Federation docs
You can federate multiple subgraphs into a supergraph using:
make demowhich does the following:
# build a supergraph from 3 subgraphs: products, users, inventory
make supergraphwhich runs:
rover supergraph compose --config ./supergraph.yaml > supergraph.graphql
and then runs:
docker-compose up -d
Creating apollo-gateway ... done
Creating inventory ... done
Creating users ... done
Creating products ... done
Starting Apollo Gateway in local mode ...
Using local: supergraph.graphql
🚀 Graph Router ready at http://localhost:4000/
make demo then issues a curl request to the graph router via:
make querywhich issues the following query that fetches across 3 subgraphs:
query Query {
allProducts {
id
sku
createdBy {
email
totalProductsCreated
}
}
}with results like:
{
data: {
allProducts: [
{
id: "apollo-federation",
sku: "federation",
createdBy: {
email: "[email protected]",
totalProductsCreated: 1337
}
},{
id: "apollo-studio",
sku: "studio",
createdBy:{
email: "[email protected]",
totalProductsCreated: 1337
}
}
]
}
}make demo then shuts down the graph router:
docker-compose down
make docker-up
- Open http://localhost:4000/
- Click
Query your server - Run a query:
query Query {
allProducts {
id
sku
createdBy {
email
totalProductsCreated
}
}
}View results:
make docker-down
make docker-up-otel-collector
make smoke
browse to http://localhost:9411/
make docker-down-otel-collector
You can send Open Telemetry from the Gateway to Honeycomb with the following collector-config.yml:
receivers:
otlp:
protocols:
grpc:
http:
cors_allowed_origins:
- http://*
- https://*
exporters:
otlp:
endpoint: "api.honeycomb.io:443"
headers:
"x-honeycomb-team": "your-api-key"
"x-honeycomb-dataset": "your-dataset-name"
service:
pipelines:
traces:
receivers: [otlp]
exporters: [otlp]
- Docs: Open Telemetry for Apollo Federation
- Docker compose file: docker-compose.otel-collector.yml
- Helper library: supergraph-demo-opentelemetry
- See usage in:
See also: Apollo Studio docs
Managed Federation in Apollo Studio enables teams to independently publish subgraphs to the Apollo Registry, so they can be automatically composed into a supergraph for apps to use.
To get started with Managed Federation, create your Apollo account:
- Signup for a free Team trial: https://studio.apollographql.com/signup
- Create an organization
- Important: use the
Teamtrial which gives you access Apollo features likeSchema Checks.
Then create a Graph of type Deployed with the Federation option.
Once you have created your graph in Apollo Studio, run the following:
make demo-managedwhich will prompt for your graph key and graph ref and save them to ./graph-api.env:
graph key- the graph API key used to authenticate with Apollo Studio.graph ref- a reference to the graph in Apollo's registry the graph router should pull from.- in the form
<graph-id>@<variant> @<variant>is optional and will default to@current- examples:
my-graph@dev,my-graph@stage,my-graph@prod
- in the form
- see configuration reference for details.
Note: The generated ./graph-api.env holds your APOLLO_KEY and APOLLO_GRAPH_REF.
make demo-managed will publish the subgraphs/**.graphql schemas to your new Federated graph in the Apollo Registry, which performs managed composition and schema checks, to prevent breaking changes:
make publishTemporary composition errors may surface as each subgraph is published:
+ rover subgraph publish supergraph-router@dev --routing-url http://products:4000/graphql --schema subgraphs/products/products.graphql --name products
Publishing SDL to supergraph-router:dev (subgraph: products) using credentials from the default profile.
A new subgraph called 'products' for the 'supergraph-router' graph was created.
The gateway for the 'supergraph-router' graph was NOT updated with a new schema
WARN: The following composition errors occurred:
Unknown type "User".
[products] Query -> `Query` is an extension type, but `Query` is not defined in any service
Success! Once all subgraphs are published the supergraph will be updated, for example:
+ rover subgraph publish supergraph-router@dev --routing-url https://users:4000/graphql --schema subgraphs/users/users.graphql --name users
Publishing SDL to supergraph-router:dev (subgraph: users) using credentials from the default profile.
A new subgraph called 'users' for the 'supergraph-router' graph was created
The gateway for the 'supergraph-router' graph was updated with a new schema, composed from the updated 'users' subgraph
Viewing the Federated graph in Apollo Studio we can see the supergraph and the subgraphs it's composed from:
The graph router and subgraph services will be started by make demo-managed next.
using docker-compose.managed.yml:
version: '3'
services:
apollo-gateway:
container_name: apollo-gateway
build: ./gateway
environment:
- APOLLO_SCHEMA_CONFIG_DELIVERY_ENDPOINT=https://uplink.api.apollographql.com/
env_file: # created with: make graph-api-env
- graph-api.env
ports:
- "4000:4000"
products:
container_name: products
build: ./subgraphs/products
inventory:
container_name: inventory
build: ./subgraphs/inventory
users:
container_name: users
build: ./subgraphs/usersmake docker-up-managedwhich shows:
docker-compose -f docker-compose.managed.yml up -d
Creating network "supergraph-demo_default" with the default driver
Creating apollo-gateway ... done
Starting Apollo Gateway in managed mode ...
Apollo usage reporting starting! See your graph at https://studio.apollographql.com/graph/supergraph-router@dev/
🚀 Server ready at http://localhost:4000/
make demo-managed then issues a curl request to the graph router:
make querywhich has the same query and response as above.
make demo-managed then shuts down the graph router:
make docker-downSee also: working with subgraphs docs
Apollo Schema Checks help ensure subgraph changes don't break the federated graph, reducing downtime and enabling teams to ship faster.
With Managed Federation you can leave the graph router running and it will update automatically when subgraph changes are published and they successfully compose and pass all schema checks in Apollo Studio:
make docker-up-managedStarting Apollo Gateway in managed mode ...
Apollo usage reporting starting! See your graph at https://studio.apollographql.com/graph/supergraph-router@dev/
🚀 Server ready at http://localhost:4000/
To simulate a change to the products subgraph, add a Color enum to .subgraphs/products.graphql:
enum Color {
BLUE
GREEN
}Then publish the changes to the registry:
make publishThen remove the Color enum from .subgraphs/products.graphql:
enum Color {
BLUE
GREEN
}Run a schema check against the published version in the registry:
make check-productsThis detects the schema changes and compares them against the known graph operations to determine that even though there are schema changes, there is no impact to actual operations so changes can be safely published:
Checked the proposed subgraph against supergraph-demo@current
Compared 3 schema changes against 2 operations
┌────────┬─────────────────────────┬──────────────────────────────────────────┐
│ Change │ Code │ Description │
├────────┼─────────────────────────┼──────────────────────────────────────────┤
│ PASS │ TYPE_REMOVED │ type `Color`: removed │
├────────┼─────────────────────────┼──────────────────────────────────────────┤
│ PASS │ VALUE_REMOVED_FROM_ENUM │ enum type `Color`: value `BLUE` removed │
├────────┼─────────────────────────┼──────────────────────────────────────────┤
│ PASS │ VALUE_REMOVED_FROM_ENUM │ enum type `Color`: value `GREEN` removed │
└────────┴─────────────────────────┴──────────────────────────────────────────┘Then publish the changes and check again:
make publish
make check-productswhich shows:
Checked the proposed subgraph against supergraph-demo@current
There were no changes detected in the composed schema.
Using rover in a local dev environment helps catch potentially breaking changes sooner. The next section covers how rover can be integrated into your CI/CD environments, and how Managed Federation catches breaking changes before they are delivered to the graph router.
This example repo is a monorepo, but this same basic CI/CD workflow applies for single-repo-per-package scenarios.
-
Create graph variants in Apollo Studio for
dev,staging, andprod: -
Configure schema checks for your graph:
- Federated composition checks will run against the subgraph schemas published to each variant.
- Operation checks should be configured to validate real world schema usage with usage data from
stagingandprodvariants. - Configure Gateway deployments to provide usage reporting data for operation checks.
- CI for each subgraph for source pull requests: subgraph-check.yml
rover subgraph check- schema checks against schema in the
devvariant - operation checks against usage data in the
prodand typicallystagevariants.
-
If you’re in a monorepo:
- Consider using 3-way merges and overriding the APOLLO_VCS_COMMIT and/or APOLLO_VCS_BRANCH to correlate schema changes for subgraph changes.
With this approach, failed schema checks (example) are caught as close to the source of the change as possible, but only fully validated supergraph schemas are published for use.
Breaking changes are sometimes intentional, and to accommodate this, Apollo Studio has the option to mark certain changes as safe in the UI, that provides a check report URL in your CI, so you can easily navigate to Apollo Studio to: review the check, mark things safe and then re-run your pipeline.
- Run a deployment workflow like this simple example subgraph-deploy-publish.yml
- Before subgraph deployment
- Do a reality check with
rover subgraph check
- Do a reality check with
- Deploy subgraph service
- Should have the service deployed before publishing the subgraph schema
- After subgraph deployment
- Publish the subgraph schema to the registry with
rover subgraph publish - Managed Federation will run central schema checks and operation check and publish a new supergraph schema for the Gateways in the fleet for each environment
- Publish the subgraph schema to the registry with
- Before subgraph deployment
Publishing subgraph schema changes with rover subgraph publish always stores a new subgraph schema version to the Apollo Registry, even if schema checks don’t pass.
Managed Federation ultimately catches all breaking changes prior before a new supergraph schema is published:
- Runs schema checks after each
rover subgraph publish - Composes a supergraph schema if all checks pass
- Makes the supergraph schema available in the:
Apollo Uplink- that the Gateway can poll for live updates (default).Apollo Registry- for retrieval viarover supergraph fetch.Apollo Supergraph Build Webhook- for custom integrations
Key benefits to Managed Federation:
- CI for multiple concurrent
rover subgraph publishfrom multiple service repos - Central point of control & governance
- Globally consistent schema checks and composition
- Catches breaking changes at supergraph build time before a new supergraph is published, before they're published for Gateways to use.
The Gateway image and configuration can be managed using standard CI practices.
For example, if using Docker images:
- see example monorepo release workflow
- bumps package versions in this
source repo - build & push Gateway docker images to DockerHub
The default configuration for the Gateway is to update in place by pulling new supergraph schema versions as they're published to the Apollo Uplink. Gateways in the fleet poll the Uplink every 10 seconds by default, so there will be a fast rolling upgrade as Gateways check the Uplink, without the need to restart the Gateway.
Update in place is useful for any long-lived Gateway instance where an immediate update of the Gateway instance's supergraph schema is desired.
Update-in-place with Managed Federation is useful for:
- long-lived VMs
- Kubernetes
Deployments - Serverless functions that may be cached outside of operator control.
Configure the Gateways in each fleet dev, staging, prod to:
- pull supergraph schema from their respective graph variants, via the Apollo Uplink.
- provide usage reporting data for operation checks.
You can do custom CD with the following hooks and the rover CLI:
- supergraph build webhook - pushes from Managed Federation.
rover supergraph fetch- pulls from theApollo Registry.
See Kubernetes-native GraphOps to learn more about using custom CD with Kubernetes and GitOps.
You'll need the latest versions of:
then run:
make demo-k8swhich generates a graph router Deployment and supergraph ConfigMap using:
kubectl kustomize k8s/router/base
and then creates:
- local k8s cluster with the NGINX Ingress Controller
- graph-router
Deploymentconfigured to use a supergraphConfigMap - graph-router
ServiceandIngress
using k8s/router/base/router.yaml via:
kubectl apply -k k8s/router/baseapiVersion: apps/v1
kind: Deployment
metadata:
labels:
app: router
name: router-deployment
spec:
replicas: 1
selector:
matchLabels:
app: router
template:
metadata:
labels:
app: router
spec:
containers:
- env:
- name: APOLLO_SCHEMA_CONFIG_EMBEDDED
value: "true"
image: prasek/supergraph-router:latest
name: router
ports:
- containerPort: 4000
volumeMounts:
- mountPath: /etc/config
name: supergraph-volume
volumes:
- configMap:
name: supergraph-c22698b7b9
name: supergraph-volume
---
apiVersion: v1
kind: ConfigMap
metadata:
name: supergraph-c22698b7b9
data:
supergraph.graphql: |
schema
@core(feature: "https://specs.apollo.dev/core/v0.1"),
@core(feature: "https://specs.apollo.dev/join/v0.1")
{
query: Query
}
...
enum join__Graph {
INVENTORY @join__graph(name: "inventory" url: "http://inventory:4000/graphql")
PRODUCTS @join__graph(name: "products" url: "http://products:4000/graphql")
USERS @join__graph(name: "users" url: "https://users:4000/graphql")
}
type Product
@join__owner(graph: PRODUCTS)
@join__type(graph: PRODUCTS, key: "id")
@join__type(graph: PRODUCTS, key: "sku package")
@join__type(graph: PRODUCTS, key: "sku variation{id}")
@join__type(graph: INVENTORY, key: "id")
{
id: ID! @join__field(graph: PRODUCTS)
sku: String @join__field(graph: PRODUCTS)
package: String @join__field(graph: PRODUCTS)
variation: ProductVariation @join__field(graph: PRODUCTS)
dimensions: ProductDimension @join__field(graph: PRODUCTS)
createdBy: User @join__field(graph: PRODUCTS, provides: "totalProductsCreated")
delivery(zip: String): DeliveryEstimates @join__field(graph: INVENTORY, requires: "dimensions{size weight}")
}
type ProductDimension {
size: String
weight: Float
}
type ProductVariation {
id: ID!
}
type Query {
allProducts: [Product] @join__field(graph: PRODUCTS)
product(id: ID!): Product @join__field(graph: PRODUCTS)
}
type User
@join__owner(graph: USERS)
@join__type(graph: USERS, key: "email")
@join__type(graph: PRODUCTS, key: "email")
{
email: ID! @join__field(graph: USERS)
name: String @join__field(graph: USERS)
totalProductsCreated: Int @join__field(graph: USERS)
}
---
apiVersion: v1
kind: Service
metadata:
name: router-service
spec:
ports:
- port: 4000
protocol: TCP
targetPort: 4000
selector:
app: router
---
apiVersion: networking.k8s.io/v1
kind: Ingress
metadata:
annotations:
kubernetes.io/ingress.class: nginx
name: router-ingress
spec:
rules:
- http:
paths:
- backend:
service:
name: router-service
port:
number: 4000
path: /
pathType: Prefixand 3 subgraph services k8s/subgraphs/base/subgraphs.yaml via:
kubectl kustomize k8s/subgraphs/basemake demo-k8s then runs the following in a loop until the query succeeds or 2 min timeout:
kubectl get all
make k8s-querywhich shows the following:
NAME READY STATUS RESTARTS AGE
pod/inventory-65494cbf8f-bhtft 1/1 Running 0 59s
pod/products-6d75ff449c-9sdnd 1/1 Running 0 59s
pod/router-deployment-84cbc9f689-8fcnf 1/1 Running 0 20s
pod/users-d85ccf5d9-cgn4k 1/1 Running 0 59s
NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE
service/inventory ClusterIP 10.96.108.120 <none> 4000/TCP 59s
service/kubernetes ClusterIP 10.96.0.1 <none> 443/TCP 96s
service/products ClusterIP 10.96.65.206 <none> 4000/TCP 59s
service/router-service ClusterIP 10.96.178.206 <none> 4000/TCP 20s
service/users ClusterIP 10.96.98.53 <none> 4000/TCP 59s
NAME READY UP-TO-DATE AVAILABLE AGE
deployment.apps/inventory 1/1 1 1 59s
deployment.apps/products 1/1 1 1 59s
deployment.apps/router-deployment 1/1 1 1 20s
deployment.apps/users 1/1 1 1 59s
NAME DESIRED CURRENT READY AGE
replicaset.apps/inventory-65494cbf8f 1 1 1 59s
replicaset.apps/products-6d75ff449c 1 1 1 59s
replicaset.apps/router-deployment-84cbc9f689 1 1 1 20s
replicaset.apps/users-d85ccf5d9 1 1 1 59s
Smoke test
-------------------------------------------------------------------------------------------
++ curl -X POST -H 'Content-Type: application/json' --data '{ "query": "{ allProducts { id, sku, createdBy { email, totalProductsCreated } } }" }' http://localhost:80/
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 352 100 267 100 85 3000 955 --:--:-- --:--:-- --:--:-- 3911
{"data":{"allProducts":[{"id":"apollo-federation","sku":"federation","createdBy":{"email":"[email protected]","totalProductsCreated":1337}},{"id":"apollo-studio","sku":"studio","createdBy":{"email":"[email protected]","totalProductsCreated":1337}}]}}
Success!
-------------------------------------------------------------------------------------------
make demo-k8s then cleans up:
deployment.apps "graph-router" deleted
service "graphql-service" deleted
ingress.networking.k8s.io "graphql-ingress" deleted
Deleting cluster "kind" ...
See serverless.yml
make demo-serverless
which does the following:
rover supergraph compose --config serverless/supergraph.yaml > serverless/supergraph.graphql
docker-compose -f docker-compose.serverless.yml up -d
Creating network "supergraph-demo_default" with the default driver
Creating serverless ... done
docker-compose -f docker-compose.serverless.yml logs
Attaching to serverless
serverless | Serverless: Running "serverless" installed locally (in service node_modules)
serverless | offline: Starting Offline: dev/us-east-1.
serverless | offline: Offline [http for lambda] listening on http://0.0.0.0:3002
serverless | offline: Function names exposed for local invocation by aws-sdk:
serverless | * router: supergraph-serverless-dev-router
serverless | * inventory: supergraph-serverless-dev-inventory
serverless | * products: supergraph-serverless-dev-products
serverless | * users: supergraph-serverless-dev-users
serverless |
serverless | ┌───────────────────────────────────────────────────────────────────────────┐
serverless | │ │
serverless | │ ANY | http://0.0.0.0:4000/ │
serverless | │ POST | http://0.0.0.0:4000/2015-03-31/functions/router/invocations │
serverless | │ ANY | http://0.0.0.0:4000/inventory │
serverless | │ POST | http://0.0.0.0:4000/2015-03-31/functions/inventory/invocations │
serverless | │ ANY | http://0.0.0.0:4000/products │
serverless | │ POST | http://0.0.0.0:4000/2015-03-31/functions/products/invocations │
serverless | │ ANY | http://0.0.0.0:4000/users │
serverless | │ POST | http://0.0.0.0:4000/2015-03-31/functions/users/invocations │
serverless | │ │
serverless | └───────────────────────────────────────────────────────────────────────────┘
serverless |
serverless | offline: [HTTP] server ready: http://0.0.0.0:4000 🚀
serverless | offline:
serverless | offline: Enter "rp" to replay the last request
-------------------------------------------------------------------------------------------
++ curl -X POST -H 'Content-Type: application/json' --data '{ "query": "{allProducts{id,sku,createdBy{email,totalProductsCreated}}}" }' http://localhost:4000/
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 341 100 267 100 74 331 91 --:--:-- --:--:-- --:--:-- 423
Result:
{"data":{"allProducts":[{"id":"apollo-federation","sku":"federation","createdBy":{"email":"[email protected]","totalProductsCreated":1337}},{"id":"apollo-studio","sku":"studio","createdBy":{"email":"[email protected]","totalProductsCreated":1337}}]}}
-------------------------------------------------------------------------------------------
docker-compose -f docker-compose.serverless.yml down
Stopping serverless ... done
Removing serverless ... done
Removing network supergraph-demo_default
The Apollo Router is our next-generation GraphQL Federation runtime written in Rust, and it is fast.
As a Graph Router, the Apollo Router plays the same role as the Apollo Gateway. The same subgraph schemas and composed supergraph schema can be used in both the Router and the Gateway.
This demo shows using the Apollo Router with a Federation 1 supergraph schema, composed using the Fed 1 rover supergraph compose command. To see the Router working with Federation 2 composition, checkout the Apollo Router section of apollographql/supergraph-demo-fed2.
Early benchmarks show that the Router adds less than 10ms of latency to each operation, and it can process 8x the load of the JavaScript Apollo Gateway.
To get started with the Router:
make demo-local-router
this uses a simple docker-compose.router.yml file:
version: '3'
services:
apollo-router:
container_name: apollo-router
build: ./router
volumes:
- ./supergraph.graphql:/etc/config/supergraph.graphql
- ./router/configuration.yaml:/etc/config/configuration.yaml
ports:
- "4000:4000"
products:
container_name: products
build: ./subgraphs/products
inventory:
container_name: inventory
build: ./subgraphs/inventory
users:
container_name: users
build: ./subgraphs/userswhich uses the following Dockerfile
from ubuntu
WORKDIR /usr/src/app
RUN apt-get update && apt-get install -y \
libssl-dev \
curl \
jq
COPY install.sh .
COPY run.sh .
RUN ./install.sh
CMD [ "/usr/src/app/run.sh" ]
see ./router for more details.
Apollo tools and services help you develop, maintain, operate, and scale your data graph.
![dependabot[bot] avatar](https://avatars.githubusercontent.com/in/29110?v=4 "dependabot[bot]")
![renovate[bot] avatar](https://avatars.githubusercontent.com/in/2740?v=4 "renovate[bot]")
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent