appbooster/docker-ikev2-vpn-server

docker-ikev2-vpn-server's Issues

Radius server does not startup

Hello! Need help with starting FreeRadius container. Start failing with that logs:

...
freeradius-server |   # Instantiating module "rest" from file /etc/freeradius/mods-enabled/rest
freeradius-server |    authorize {
freeradius-server |    	uri = "/user/%{User-Name}/mac/%{Called-Station-ID}?action=authorize"
freeradius-server |    	method = "get"
freeradius-server |    	body = "none"
freeradius-server |    	auth = "none"
freeradius-server |    	require_auth = no
freeradius-server |    	timeout = 4.000000
freeradius-server |    	chunk = 0
freeradius-server |     tls {
freeradius-server |     	check_cert = yes
freeradius-server |     	check_cert_cn = yes
freeradius-server |     }
freeradius-server |    }
freeradius-server |    authenticate {
freeradius-server |    	uri = "/user/%{User-Name}/mac/%{Called-Station-ID}?action=authenticate"
freeradius-server |    	method = "get"
freeradius-server |    	body = "none"
freeradius-server |    	auth = "none"
freeradius-server |    	require_auth = no
freeradius-server |    	timeout = 4.000000
freeradius-server |    	chunk = 0
freeradius-server |     tls {
freeradius-server |     	check_cert = yes
freeradius-server |     	check_cert_cn = yes
freeradius-server |     }
freeradius-server |    }
freeradius-server |    accounting {
freeradius-server |    	uri = "/vpn_sessions/%{Acct-Session-Id}-%{Acct-Unique-Session-ID}"
freeradius-server |    	method = "post"
freeradius-server |    	body = "json"
freeradius-server |    	data = "{ "username": "%{User-Name}", "nas_port": "%{NAS-Port}", "nas_ip_address": "%{NAS-IP-Address}", "framed_ip_address": "%{Framed-IP-Address}", "framed_ipv6_prefix": "%{Framed-IPv6-Prefix}", "nas_identifier": "%{NAS-Identifier}", "airespace_wlan_id": "%{Airespace-Wlan-Id}", "acct_session_id": "%{Acct-Session-Id}", "nas_port_type": "%{NAS-Port-Type}", "cisco_avpair": "%{Cisco-AVPair}", "acct_authentic": "%{Acct-Authentic}", "tunnel_type": "%{Tunnel-Type}", "tunnel_medium_type": "%{Tunnel-Medium-Type}", "tunnel_private_group_id": "%{Tunnel-Private-Group-Id}", "event_timestamp": "%{Event-Timestamp}", "acct_status_type": "%{Acct-Status-Type}", "acct_input_octets": "%{Acct-Input-Octets}", "acct_input_gigawords": "%{Acct-Input-Gigawords}", "acct_output_octets": "%{Acct-Output-Octets}", "acct_output_gigawords": "%{Acct-Output-Gigawords}", "acct_input_packets": "%{Acct-Input-Packets}", "acct_output_packets": "%{Acct-Output-Packets}", "acct_terminate_cause": "%{Acct-Terminate-Cause}", "acct_session_time": "%{Acct-Session-Time}", "acct_delay_time": "%{Acct-Delay-Time}", "calling_station_id": "%{Calling-Station-Id}", "called_station_id": "%{Called-Station-Id}"}"
freeradius-server |    	auth = "none"
freeradius-server |    	require_auth = no
freeradius-server |    	timeout = 4.000000
freeradius-server |    	chunk = 0
freeradius-server |     tls {
freeradius-server |     	check_cert = yes
freeradius-server |     	check_cert_cn = yes
freeradius-server |     }
freeradius-server |    }
freeradius-server |    post-auth {
freeradius-server |    	uri = "/user/%{User-Name}/mac/%{Called-Station-ID}?action=post-auth"
freeradius-server |    	method = "post"
freeradius-server |    	body = "none"
freeradius-server |    	auth = "none"
freeradius-server |    	require_auth = no
freeradius-server |    	timeout = 4.000000
freeradius-server |    	chunk = 0
freeradius-server |     tls {
freeradius-server |     	check_cert = yes
freeradius-server |     	check_cert_cn = yes
freeradius-server |     }
freeradius-server |    }
freeradius-server | rlm_rest: libcurl version: libcurl/7.58.0 OpenSSL/1.1.1 zlib/1.2.11 libidn2/2.0.4 libpsl/0.19.1 (+libidn2/2.0.4) nghttp2/1.30.0 librtmp/2.3
freeradius-server | rlm_rest (rest): Initialising connection pool
freeradius-server |    pool {
freeradius-server |    	start = 5
freeradius-server |    	min = 3
freeradius-server |    	max = 32
freeradius-server |    	spare = 10
freeradius-server |    	uses = 0
freeradius-server |    	lifetime = 0
freeradius-server |    	cleanup_interval = 30
freeradius-server |    	idle_timeout = 60
freeradius-server |    	retry_delay = 30
freeradius-server |    	spread = no
freeradius-server |    }
freeradius-server | rlm_rest (rest): Opening additional connection (0), 1 of 32 pending slots used
freeradius-server | rlm_rest (rest): Connecting to ""
freeradius-server | rlm_rest (rest): Connection failed: 3 - URL using bad/illegal format or missing URL
freeradius-server | rlm_rest (rest): Opening connection failed (0)
freeradius-server | rlm_rest (rest): Removing connection pool
freeradius-server | /etc/freeradius/mods-enabled/rest[1]: Instantiation failed for module "rest"
freeradius-server exited with code 1

my .env file content:

VPNHOST=***exampl***.xyz
[email protected]
RADIUS_SERVER=radius # is this correct for docker network?
RADIUS_SERVER_SECRET=HnFkYLXSmPcALJ2kgw5q # random string

Maybe i miss somthing?
Thanks in advance!

did ./build.sh after 354 seconds such an error, tried twice

Dockerfile:13
--------------------
  12 |     # Install dep packge , Configure,make and install strongSwan
  13 | >>> RUN apk --update add build-base curl bash iproute2 iptables-dev openssl openssl-dev supervisor bash certbot \
  14 | >>>     && mkdir -p /tmp/strongswan \
  15 | >>>     && apk add --update $RUNTIME_DEPS \
  16 | >>>     && apk add --virtual build_deps $BUILD_DEPS \
  17 | >>>     && cp /usr/bin/envsubst /usr/local/bin/envsubst \
  18 | >>>     && curl -Lo /tmp/strongswan.tar.gz $SS_VERSION \
  19 | >>>     && tar --strip-components=1 -C /tmp/strongswan -xf /tmp/strongswan.tar.gz \
  20 | >>>     && cd /tmp/strongswan \
  21 | >>>     && ./configure  --enable-eap-identity --enable-eap-md5 --enable-eap-mschapv2 --enable-eap-tls --enable-eap-ttls --enable-eap-peap --enable-eap-tnc --enable-eap-dynamic --enable-xauth-eap --enable-dhcp --enable-openssl --enable-addrblock --enable-unity --enable-certexpire --enable-radattr --enable-swanctl --enable-eap-radius --disable-gmp && make && make install \
  22 | >>>     && rm -rf /tmp/* \
  23 | >>>     && apk del build-base openssl-dev build_deps \
  24 | >>>     && rm -rf /var/cache/apk/* \
  25 | >>>     && ln -snf /usr/share/zoneinfo/$TZ /etc/localtime && echo $TZ > /etc/timezone \
  26 | >>>     && rm /usr/local/etc/ipsec.secrets
  27 |
--------------------
ERROR: failed to solve: process "/bin/sh -c apk --update add build-base curl bash iproute2 iptables-dev openssl openssl-dev supervisor bash certbot     && mkdir -p /tmp/strongswan     && apk add --update $RUNTIME_DEPS     && apk add --virtual build_deps $BUILD_DEPS     && cp /usr/bin/envsubst /usr/local/bin/envsubst     && curl -Lo /tmp/strongswan.tar.gz $SS_VERSION     && tar --strip-components=1 -C /tmp/strongswan -xf /tmp/strongswan.tar.gz     && cd /tmp/strongswan     && ./configure  --enable-eap-identity --enable-eap-md5 --enable-eap-mschapv2 --enable-eap-tls --enable-eap-ttls --enable-eap-peap --enable-eap-tnc --enable-eap-dynamic --enable-xauth-eap --enable-dhcp --enable-openssl --enable-addrblock --enable-unity --enable-certexpire --enable-radattr --enable-swanctl --enable-eap-radius --disable-gmp && make && make install     && rm -rf /tmp/*     && apk del build-base openssl-dev build_deps     && rm -rf /var/cache/apk/*     && ln -snf /usr/share/zoneinfo/$TZ /etc/localtime && echo $TZ > /etc/timezone     && rm /usr/local/etc/ipsec.secrets" did not complete successfully: exit code: 2