Feature flags provide a way for ASP.Net Core applications to turn features on or off dynamically. Developers can use feature flags in simple use cases like conditional statements to more advanced scenarios like conditionally adding routes or MVC filters. Feature flags build on top of the .NET Core configuration system. Any .NET Core configuration provider is capable of acting as the back-bone for feature flags.
Here are some of the benefits of using this library:
- A common convention for feature management
- Low barrier-to-entry
- Built on
IConfiguration - Supports JSON file feature flag setup
- Built on
- Feature Flag lifetime management
- Configuration values can change in real-time, feature flags can be consistent across the entire request
- Simple to Complex Scenarios Covered
- Toggle on/off features through declarative configuration file
- Dynamically evaluate state of feature based on call to server
- API extensions for ASP.Net Core and MVC framework
- Routing
- Filters
- Action Attributes
API Reference: https://go.microsoft.com/fwlink/?linkid=2091700
Feature flags are composed of two parts, a name and a list of feature-filters that are used to turn the feature on.
Feature filters define a scenario for when a feature should be enabled. When a feature is evaluated for whether it is on or off, its list of feature-filters are traversed until one of the filters decides the feature should be enabled. At this point the feature is considered enabled and traversal through the feature filters stops. If no feature filter indicates that the feature should be enabled, then it will be considered disabled.
As an example, a Microsoft Edge browser feature filter could be designed. This feature filter would activate any features it is attached to as long as an HTTP request is coming from Microsoft Edge.
The .NET Core configuration system is used to determine the state of feature flags. The foundation of this system is IConfiguration. Any provider for IConfiguration can be used as the feature state provider for the feature flag library. This enables scenarios ranging from appsettings.json to Azure App Configuration and more.
The feature management library supports appsettings.json as a feature flag source since it is a provider for .NET Core's IConfiguration system. Below we have an example of the format used to set up feature flags in a json file.
{
"Logging": {
"LogLevel": {
"Default": "Warning"
}
},
// Define feature flags in a json file
"FeatureManagement": {
"FeatureT": {
"EnabledFor": [
{
"Name": "AlwaysOn"
}
]
},
"FeatureU": {
"EnabledFor": []
},
"FeatureV": {
"EnabledFor": [
{
"Name": "TimeWindow",
"Parameters": {
"Start": "Wed, 01 May 2019 13:59:59 GMT",
"End": "Mon, 01 July 2019 00:00:00 GMT"
}
}
]
}
}
}
The FeatureManagement section of the json document is used by convention to load feature flag settings. In the section above, we see that we have provided three different features. Features define their feature filters using the EnabledFor property. In the feature filters for FeatureT we see AlwaysOn. This feature filter is built-in and if specified will always enable the feature. The AlwaysOn feature filter does not require any configuration so it only has the Name property. FeatureU has no filters in its EnabledFor property and thus will never be enabled. Any functionality that relies on this feature being enabled will not be accessible as long as the feature filters remain empty. However, as soon as a feature filter is added that enables the feature it can begin working. FeatureV specifies a feature filter named TimeWindow. This is an example of a configurable feature filter. We can see in the example that the filter has a parameter's property. This is used to configure the filter. In this case, the start and end times for the feature to be active are configured.
The following snippet demonstrates an alternative way to define a feature that can be used for on/off features.
{
"Logging": {
"LogLevel": {
"Default": "Warning"
}
},
// Define feature flags in config file
"FeatureManagement": {
"FeatureT": true, // On feature
"FeatureX": false // Off feature
}
}
To make it easier to reference these feature flags in code, we recommend to define feature flag variables like below.
// Define feature flags in an enum
public enum MyFeatureFlags
{
FeatureT,
FeatureU,
FeatureV
}
Feature flags rely on .NET Core dependency injection. We can register the feature management services using standard conventions.
using Microsoft.FeatureManagement;
using Microsoft.FeatureManagement.FeatureFilters;
public class Startup
{
public void ConfigureServices(IServiceCollection services)
{
services.AddFeatureManagement()
.AddFeatureFilter<PercentageFilter>()
.AddFeatureFilter<TimeWindowFilter>();
}
}
This tells the feature manager to use the "FeatureManagement" section from the configuration for feature flag settings. It also registers two built-in feature filters named PercentageFilter and TimeWindowFilter. When filters are referenced in feature flag settings (appsettings.json) the Filter part of the type name can be omitted.
Advanced: If the root of the configuration is provided, the feature manager will first look for a configuration section with the name of the feature, and will then fall back to the "FeatureManagement" section automatically.
The simplest use case for feature flags is to do a conditional check for whether a feature is enabled to take different paths in code. The uses cases grow from there as the feature flag API begins to offer extensions into ASP.Net Core.
The basic form of feature management is checking if a feature is enabled and then performing actions based on the result. This is done through the IFeatureManager's IsEnabledAsync method.
...
IFeatureManager featureManager;
...
if (await featureManager.IsEnabledAsync(nameof(MyFeatureFlags.FeatureU)))
{
// Do something
}
When using the feature management library with MVC, the IFeatureManager can be obtained through dependency injection.
public class HomeController : Controller
{
private readonly IFeatureManager _featureManager;
public HomeController(IFeatureManager featureManager)
{
_featureManager = featureManager;
}
}
MVC controller and actions can require that a given feature, or one of any list of features, be enabled in order to execute. This can be done by using a FeatureGateAttribute, which can be found in the Microsoft.FeatureManagement.Mvc namespace.
[FeatureGate(MyFeatureFlags.FeatureX)]
public class HomeController : Controller
{
...
}
The HomeController above is gated by "FeatureX". "FeatureX" must be enabled before any action the HomeController contains can be executed.
[FeatureGate(MyFeatureFlags.FeatureY)]
public IActionResult Index()
{
return View();
}
The Index MVC action above requires "FeatureY" to be enabled before it can execute.
When an MVC controller or action is blocked because none of the features it specifies are enabled, a registered IDisabledFeaturesHandler will be invoked. By default, a minimalistic handler is registered which returns HTTP 404. This can be overridden using the IFeatureManagementBuilder when registering feature flags.
public interface IDisabledFeaturesHandler
{
Task HandleDisabledFeature(IEnumerable<string> features, ActionExecutingContext context);
}
In MVC views <feature> tags can be used to conditionally render content based on whether a feature is enabled or not.
<feature name=@nameof(MyFeatureFlags.FeatureX)>
<p>This can only be seen if 'FeatureX' is enabled.</p>
</feature>
The <feature> tag requires a tag helper to work. This can be done by adding the feature management tag helper to the _ViewImports.cshtml file.
@addTagHelper *, Microsoft.FeatureManagement.AspNetCore
MVC action filters can be set up to conditionally execute based on the state of a feature. This is done by registering MVC filters in a feature aware manner.
The feature management pipeline supports async MVC Action filters, which implement IAsyncActionFilter.
services.AddMvc(o =>
{
o.Filters.AddForFeature<SomeMvcFilter>(nameof(MyFeatureFlags.FeatureV));
});
The code above adds an MVC filter named SomeMvcFilter. This filter is only triggered within the MVC pipeline if the feature it specifies, "FeatureV", is enabled.
The feature management library can be used to add application branches and middleware that execute conditionally based on feature state.
app.UseMiddlewareForFeature<ThirdPartyMiddleware>(nameof(MyFeatureFlags.FeatureU));
With the above call, the application adds a middleware component that only appears in the request pipeline if the feature "FeatureU" is enabled. If the feature is enabled/disabled during runtime, the middleware pipeline can be changed dynamically.
This builds off the more generic capability to branch the entire application based on a feature.
app.UseForFeature(featureName, appBuilder =>
{
appBuilder.UseMiddleware<T>();
});
Creating a feature filter provides a way to enable features based on criteria that you define. To implement a feature filter, the IFeatureFilter interface must be implemented. IFeatureFilter has a single method named EvaluateAsync. When a feature specifies that it can be enabled for a feature filter, the EvaluateAsync method is called. If EvaluateAsync returns true it means the feature should be enabled.
Feature filters are registered by the IFeatureManagementBuilder when AddFeatureManagement is called. These feature filters have access to the services that exist within the service collection that was used to add feature flags. Dependency injection can be used to retrieve these services.
Some feature filters require parameters to decide whether a feature should be turned on or not. For example a browser feature filter may turn on a feature for a certain set of browsers. It may be desired that Edge and Chrome browsers enable a feature, while FireFox does not. To do this a feature filter can be designed to expect parameters. These parameters would be specified in the feature configuration, and in code would be accessible via the FeatureFilterEvaluationContext parameter of IFeatureFilter.EvaluateAsync.
public class FeatureFilterEvaluationContext
{
/// <summary>
/// The name of the feature being evaluated.
/// </summary>
public string FeatureName { get; set; }
/// <summary>
/// The settings provided for the feature filter to use when evaluating whether the feature should be enabled.
/// </summary>
public IConfiguration Parameters { get; set; }
}
FeatureFilterEvaluationContext has a property named Parameters. These parameters represent a raw configuration that the feature filter can use to decide how to evaluate whether the feature should be enabled or not. To use the browser feature filter as an example once again, the filter could use Parameters to extract a set of allowed browsers that would have been specified for the feature and then check if the request is being sent from one of those browsers.
[FilterAlias("Browser")]
public class BrowserFilter : IFeatureFilter
{
... Removed for example
public Task<bool> EvaluateAsync(FeatureFilterEvaluationContext context)
{
BrowserFilterSettings settings = context.Parameters.Get<BrowserFilterSettings>() ?? new BrowserFilterSettings();
//
// Here we would use the settings and see if the request was sent from any of BrowserFilterSettings.AllowedBrowsers
}
}
When a feature filter is registered to be used for a feature flag, the alias used in configuration is the name of the feature filter type with the filter suffix, if any, removed. For example MyCriteriaFilter would be referred to as MyCriteria in configuration.
"MyFeature": { "EnabledFor": [ { "Name": "MyCriteria" } ] }
This can be overridden through the use of the FilterAliasAttribute. A feature filter can be decorated with this attribute to declare the name that should be used in configuration to reference this feature filter within a feature flag.
Feature filters can evaluate whether a feature should be enabled based off the properties of an HTTP Request. This is performed by inspecting the HTTP Context. A feature filter can get a reference to the HTTP Context by obtaining an IHttpContextAccessor through dependency injection.
public class BrowserFilter : IFeatureFilter
{
private readonly IHttpContextAccessor _httpContextAccessor;
public BrowserFilter(IHttpContextAccessor httpContextAccessor)
{
_httpContextAccessor = httpContextAccessor ?? throw new ArgumentNullException(nameof(httpContextAccessor));
}
}
The IHttpContextAccessor must be added to the dependency injection container on startup for it to be available. It can be registered in the IServiceCollection using the following method.
public void ConfigureServices(IServiceCollection services)
{
…
services.TryAddSingleton<IHttpContextAccessor, HttpContextAccessor>();
…
}
In console applications there is no ambient context such as HttpContext that feature filters can acquire and utilize to check if a feature should be on or off. In this case, applications need to provide an object representing a context into the feature management system for use by feature filters. This is done by using IFeatureManager.IsEnabledAsync<TContext>(string featureName, TContext appContext). The appContext object that is provided to the feature manager can be used by feature filters to evaluate the state of a feature.
MyAppContext context = new MyAppContext
{
AccountId = current.Id;
}
if (featureManager.IsEnabled(feature, context))
{
}
Contextual feature filters implement the IContextualFeatureFilter<TContext> interface. These special feature filters can take advantage of the context that is passed in when IFeatureManager.IsEnabledAsync<TContext> is called. The TContext type parameter in IContextualFeatureFilter<TContext> describes what context type the filter is capable of handling. This allows the developer of a contextual feature filter to describe what is required of those who wish to utilize it. Since every type is a descendant of object, a filter that implements IContextualFeatureFilter<object> can be called for any provided context. To illustrate an example of a more specific contextual feature filter, consider a feature that is enabled if an account is in a configured list of enabled accounts.
public interface IAccountContext
{
string AccountId { get; set; }
}
[FilterAlias("AccountId")]
class AccountIdFilter : IContextualFeatureFilter<IAccountContext>
{
public Task<bool> EvaluateAsync(FeatureFilterEvaluationContext featureEvaluationContext, IAccountContext accountId)
{
//
// Evaluate if the feature should be on with the help of the provided IAccountContext
}
}
We can see that the AccountIdFilter requires an object that implements IAccountContext to be provided to be able to evalute the state of a feature. When using this feature filter, the caller needs to make sure that the passed in object implements IAccountContext.
Note: Only a single feature filter interface can be implemented by a single type. Trying to add a feature filter that implements more than a single feature filter interface will result in an ArgumentException.
There a few feature filters that come with the Microsoft.FeatureManagement package. These feature filters are not added automatically, but can be referenced and registered as soon as the package is registered.
Each of the built-in feature filters have their own parameters. Here is the list of feature filters along with examples.
This filter provides the capability to enable a feature based on a set percentage.
"EnhancedPipeline": {
"EnabledFor": [
{
"Name": "Microsoft.Percentage",
"Parameters": {
"Value": 50
}
}
]
}
This filter provides the capability to enable a feature based on a time window. If only End is specified, the feature will be considered on until that time. If only start is specified, the feature will be considered on at all points after that time.
"EnhancedPipeline": {
"EnabledFor": [
{
"Name": "Microsoft.TimeWindow",
"Parameters": {
"Start": "Wed, 01 May 2019 13:59:59 GMT",
"End": "Mon, 01 July 2019 00:00:00 GMT"
}
}
]
}
All of the built-in feature filter alias' are in the 'Microsoft' feature filter namespace. This is to prevent conflicts with other feature filters that may share the same simple alias. The segments of a feature filter namespace are split by the '.' character. A feature filter can be referenced by its fully qualified alias such as 'Microsoft.Percentage' or by the last segment which in the case of 'Microsoft.Percentage' is 'Percentage'.
Feature state is provided by the IConfiguration system. Any caching and dynamic updating is expected to be handled by configuration providers. The feature manager asks IConfiguration for the latest value of a feature's state whenever a feature is checked to be enabled.
There are scenarios which require the state of a feature to remain consistent during the lifetime of a request. The values returned from the standard IFeatureManager may change if the IConfiguration source which it is pulling from is updated during the request. This can be prevented by using IFeatureManagerSnapshot. IFeatureManagerSnapshot can be retrieved in the same manner as IFeatureManager. IFeatureManagerSnapshot implements the interface of IFeatureManager, but it caches the first evaluated state of a feature during a request and will return the same state of a feature during its lifetime.
This project welcomes contributions and suggestions. Most contributions require you to agree to a Contributor License Agreement (CLA) declaring that you have the right to, and actually do, grant us the rights to use your contribution. For details, visit https://cla.microsoft.com.
When you submit a pull request, a CLA-bot will automatically determine whether you need to provide a CLA and decorate the PR appropriately (e.g., label, comment). Simply follow the instructions provided by the bot. You will only need to do this once across all repos using our CLA.
This project has adopted the Microsoft Open Source Code of Conduct. For more information see the Code of Conduct FAQ or contact [email protected] with any additional questions or comments.
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent