arthur-liberman/vfd-configurations

vfd.config - A collection of configuration files for linux devices with a front facing display.

vfd-configurations's Issues

vfd.conf for T9 RK3328 based TV box

Hi, thank you for the openvfd project.
Actually this is not an issue but a conf file for a RK3288 based TV-Box T9, using FD655 controller and clock display.
Eth, Usb, Wifi, Play, Pause and alarm leds work as well.
It may be useful to someone.
I am not familiar with github so I attach the file zipped here.
Should someone need more info let me know.
vfd.zip

FYI a95x-f2-aml-vfd.conf is also compatible with A95x-f3

Just tried it and it's working.

Best!

Clone woes, TX9-Pro hardware changes, openvfd config question

Hi Arthur;

Got a batch of TX9-Pro's with hardware diffs
diff 1: Uses internal eth phy (100M), not external phy (1GB) - changed dtb to fix
diff 2: "/sys/class/leds/openvfd/" DOES NOT exist for the many config permutations I tried

Here's what the original (extracted from android) dtb states regarding vfd:
fd628_dev {
compatible = "amlogic,fd628_dev";
status = "okay";
fd628_gpio_clk = <0x27 0x4c 0x00>;
fd628_gpio_dat = <0x27 0x4b 0x00>;
fd628_gpio_stb = <0x27 0x35 0x00>;
};

...and, of course, my dtb includes vfd (and openvfd module loaded):
openvfd {
compatible = "open,vfd";
dev_name = "openvfd";
status = "okay";
};

On the off chance you know the relationship between android and linux GPIO pin mapping, what should I change 0x27 to? Tried 0 to 9 and 39 (0x27) unsuccessfully. I will share my dtb and config if successful.

Any ideas?
Thanks; Bill

x96Max plus Ultra

Hi
how to generate vfd.conf for x96Max plus Ultra s905x4?
VFD x96-max-1gbit-vfd.conf fror "x96Max plus" and "x96Air" don't work((

vfd in emuelec 4.7 is CE4

I put the vfd.conf file (which used and worked in emuelec 4.5) in an HK1 Box in the path where it should be put in emuelec 4.7 but I get an error on the screen that says CE4. How can it be solved? Thank you

Magicsee N5 Max X4

Would it be possible to get the vfd for this box?

thank you

add jp-tvbox-vfd.conf for Jp-TvBox (rk3566) FD6551

modprobe openvfd vfd_gpio_chip_name=$vfd_gpio_chip_name

vfd_gpio_clk='0,11,0'
vfd_gpio_dat='0,12,0'
vfd_gpio_stb='0,0,0xff'
vfd_chars='4,3,2,1,0'
vfd_dot_bits='0,1,3,2,4,5,6'
vfd_display_type='0x00,0x00,0x00,0x06'
vfd_gpio_chip_name='gpio0'

"Andowl Q96X" tv box (Allwinner H313; DDR3; Board X88PROA H313 D4 V1.0 ; eMMC; AIP1628 VFD controller)

Hello, I'm trying to make openvfd work with my hardware under linux arch aarch64.
VFD is ID 3 (A display like on the A95X R2)
so, from first column on the left , from up to down i have : "0/1", "LAN" ; 88:88 ; WIFI strong signal ; WIFI low signal

(please add descriptions of icons in the readme... I went crazy searching for all images ;D )

I still have a working stock android 10 (rooted) on eMMC , so I did a cat while VFD was on

$ cat /sys/kernel//debug/gpio
gpiochip1: GPIOs 0-287, parent: platform/pio, pio:
gpio 166 ( |cd )in lo
gpio 207 ( |wlan_hostwake )in lo
gpio 210 ( |wlan_regon )out hi
gpio 211 ( |bt_rst )out lo
gpio 226 ( |? )out hi
gpio 227 ( |? )out lo
gpio 229 ( |? )out hi
gpio 230 ( |leds_clk )out hi
gpio 231 ( |leds_dat )out hi
gpio 232 ( |? )out hi
gpio 233 ( |leds_stb )out lo
gpiochip0: GPIOs 352-383, parent: platform/r_pio, r_pio:
$

I'm also looking in my android file System for boot.img, to extract a dtb from there, but still no luck.

Could you help me? :)

X96 X4 (S905X4) 4GB/64GB 100Mbps LAN

Hello, Is it possible for it to work for a X96 X4?

dtb: sc2_s905x4_4g