The smartedge-iiot-gateway-custom from avnet

smartedge-iiot-gateway-custom's Introduction

This area contains the custom files for the IIoTGateway.

rpiboot - files needed to use rpiboot and secure rpiboot

tpm - files used to generate the tpm tools and other tpm related drivers.

utils - files added to filesystem for IIoTGateway operations.

cross compiler is locate here:

https://sourceforge.net/projects/raspberry-pi-cross-compilers/files/Raspberry%20Pi%20GCC%20Cross-Compiler%20Toolchains/GCC%208.3.0/Raspberry%20Pi%202%2C%203/

smartedge-iiot-gateway-custom's People

Contributors

Stargazers

Watchers

smartedge-iiot-gateway-custom's Issues

AVTSE-RPI-IIOTG Can't mount emmc

jack@Jacks-Laptop:~/smartedge-iiot-gateway-custom/rpiboot$ sudo ./rpiboot 
Waiting for BCM2835/6/7
Sending bootcode.bin
Failed to read correct length, returned 0
Waiting for BCM2835/6/7
Sending bootcode.bin
Failed to read correct length, returned 0
Waiting for BCM2835/6/7

Unable to mount as a storage drive, tried multiple jumper positions.

doesn't show up in /dev but after running ./rpiboot it shows up in lsusb

jack@Jacks-Laptop:~/smartedge-iiot-gateway-custom/rpiboot$ lsusb         
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 04ca:7063 Lite-On Technology Corp. HP HD Camera
Bus 001 Device 004: ID 138a:003f Validity Sensors, Inc. VFS495 Fingerprint Reader
Bus 001 Device 003: ID 8087:0a2b Intel Corp. Bluetooth wireless interface
Bus 001 Device 071: ID 0a5c:2764 Broadcom Corp. BCM2710 Boot
Bus 001 Device 002: ID 145f:01c1 Trust 2.4G Speed Mouse
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Here's the read out from dmesg

[ 1647.394524] usb 1-2: new high-speed USB device number 89 using xhci_hcd
[ 1647.542947] usb 1-2: config index 0 descriptor too short (expected 55, got 32)
[ 1647.543433] usb 1-2: New USB device found, idVendor=0a5c, idProduct=2764, bcdDevice= 0.00
[ 1647.543440] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1647.543444] usb 1-2: Product: BCM2710 Boot
[ 1647.543448] usb 1-2: Manufacturer: Broadcom
[ 1647.558608] usb 1-2: USB disconnect, device number 89
[ 1647.870395] usb 1-2: new high-speed USB device number 90 using xhci_hcd
[ 1648.206533] usb 1-2: device descriptor read/64, error -71
[ 1648.650561] usb 1-2: device descriptor read/64, error -71
[ 1649.308975] usb 1-2: new full-speed USB device number 91 using xhci_hcd
[ 1654.575024] usb 1-2: config 1 interface 0 altsetting 0 endpoint 0x1 has invalid maxpacket 512, setting to 64
[ 1654.575031] usb 1-2: config 1 interface 0 altsetting 0 endpoint 0x2 has invalid maxpacket 512, setting to 64
[ 1654.575545] usb 1-2: New USB device found, idVendor=0a5c, idProduct=2764, bcdDevice= 0.00
[ 1654.575551] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1654.575555] usb 1-2: Product: BCM2710 Boot

Recommend Projects