[bug #8264] flash procedure fail

[avrdudes]

[bug #8264] flash procedure fail

[avrs-admin]

Eric Weddington
Tue 23 Mar 2004 05:03:13 PM UTC

Using your "<make %d program>" sounds like you are using avrdude in conjunction with the WinAVR sample makefile and Programmers Notepad. I suspect that the problem lies with either one of those. Please verify by calling avrdude manually on a command line prompt and see if it still hangs.

Note that avrdude is known to work with the stk500 on windows 2000.

[avrs-admin]

Reiner Muench
Tue 23 Mar 2004 06:14:20 PM UTC

Yes I'am using pn2 and VSE.
I tried "avrdude -p ATMEGA -P com1  -e -c stk500    -U flash:w:test.hex" manually on command line

Result: same as before but avrdude can be canceled by closing window

The version avrdudew32 Version 0.1 for MS VISUAL C++ 6.0
( http://www.siwawi.arubi.uni-kl.de/avr_projects/#avrdudew32 ) works fine via IDE and command line

MooseC

[avrs-admin]

Colin O Flynn <c_oflynn>
Fri 18 Jun 2004 06:31:06 PM UTC

Hi,

I have Windows 98 and can confirm that it works for me using a similar setup. I can program flash with my STK500 connected OK (different firmware in my STK500 form yours though).

As well if I force an error condition avrdude does exit (the STK500 not connected takes a few seconds though).

Regards,

-Colin

[avrs-admin]

Colin O Flynn <c_oflynn>
Fri 18 Jun 2004 06:33:35 PM UTC

extra note: I have the latest version of avrdude built for windows.