Camera parameters (i.e. AcquisitionStatusSelector) not available

[basler]

Camera parameters (i.e. AcquisitionStatusSelector) not available

[FrankKarstens]

Should work. Use camera.AcquisitionStatusSelector="FrameTriggerWait" instead.

[lpradeFCAP]

Thanks for your reply.
Maybe I didn't make the problem clear enough:
The structure "camera" does not contain an attribute named "AcquisitionStatusSelector".
Thanks,
Ludwig

[GuzziButz]

I tested the above mentioned code camera.AcquisitionStatusSelector="FrameTriggerWait" and it worked. You must however make sure (e.g. check with pylon Viewer) that your camera actually provides this feature (not every Basler camera has an AcquisitionStatusSelector).

[lpradeFCAP]

I tried the following:

`camera = pylon.InstantCamera(pylon.TlFactory.GetInstance().CreateFirstDevice())

camera.Open()
camera.AcquisitionStatusSelector="FrameTriggerWait"`

and the third command causes a "Node not existing" error. Therefore, it does seem like my camera does not support that command. That is peculiar, as it is listed in the Basler guide for this camera.

Thanks for your help,
Ludwig