Charybdis Nano mod to add lights to the bottom plate when using the 30 degree organic tents.
Order the PCB in 1mm thickness. The gerber can be found in the releases section.
The files are in the mechanical
folder.
You have 2 options :
- print the STL in transparent PLA/PETG
- laser-cut an acrylic sheet (use the dxf)
Use the bottom plates for the tents from the Charybdis repo. Either 3d print or laser cut.
The parts are for one side. If building a double Charybdis Nano, double the parts.
Part name | Amount |
---|---|
M4 8mm Torx Screw | 2 |
M4 Nut | 2 |
PCB | 1 |
3d printed or laser cut acrylic middle layer | 1 |
1206 resistor, 330 Ohms | 1 |
1206 capacitor, 1uF | 1 |
SK6812 Mini_e led | 15 |
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.