The simple_reads_to_counts from bensutherland

Simple reads to counts

Disclaimer

This pipeline is made available with no waranty of usefulness of any kind.
Purpose: Multi-map reads to a reference transcriptome or genome to quantify read counts.
Run all scripts from the main directory.

Overview:

a) Remove adapters and trim for quality;
b) Multi-map reads against reference transcriptome or genome;
c) Estimate gene expression levels per gene or transcript for differential expression analysis.

The pipeline currently prepares data for differential expression in edgeR, but the current pipeline does not describe the edgeR workflow, as this will be highly experiment specific.

Requires the following:
Trimmomatic http://www.usadellab.org/cms/?page=trimmomatic
samtools http://samtools.sourceforge.net

Genome-based:
hisat2 https://ccb.jhu.edu/software/hisat2/index.shtml
stringtie https://ccb.jhu.edu/software/stringtie/index.shtml

Transcriptome based:
bowtie2 http://bowtie-bio.sourceforge.net/bowtie2/index.shtml
eXpress https://pachterlab.github.io/eXpress/index.html

00. Prepare data

Prepare the read data

Put raw fastq.gz data in 02_raw_data.

Raw data quality check:

fastqc 02_raw_data/*.fastq.gz -o 02_raw_data/fastqc_raw/ -t 12
multiqc -o 02_raw_data/fastqc_raw/ 02_raw_data/fastqc_raw

Genome-based: Prepare the assembly

Download the reference genome, if compressed decompress it, and copy it to 10_reference, and prepare for alignment:

# As an example, steps are done with the Pacific oyster genome here
cp -l /scratch2/bsutherland/ref_genomes/GCF_902806645.1_cgigas_uk_roslin_v1_genomic.fna ./10_reference
cp -l /scratch2/bsutherland/ref_genomes/GCF_902806645.1_cgigas_uk_roslin_v1_genomic.gff ./10_reference
cp -l /scratch2/bsutherland/ref_genomes/GCF_902806645.1_cgigas_uk_roslin_v1_genomic.gtf ./10_reference

# If you have the annotation information, extract splice-site and exon information using HISAT2 package
extract_splice_sites.py ./10_reference/GCF_902806645.1_cgigas_uk_roslin_v1_genomic.gtf > 10_reference/GCF_902806645.1_cgigas_uk_roslin_v1_genomic.ss

extract_exons.py ./10_reference/GCF_902806645.1_cgigas_uk_roslin_v1_genomic.gtf > 10_reference/GCF_902806645.1_cgigas_uk_roslin_v1_genomic.exon

# Build HISAT2 index. Leave out options for splice-sites or exons if  you do not have a gtf yet
hisat2-build --ss 10_reference/*.ss --exon 10_reference/*.exon 10_reference/GCF_902806645.1_*.fna 10_reference/GCF_902806645.1

Transcriptome-based: prepare the transcriptome

to be added

01. Trim for quality and adaptors

Per sample, trim for quality for SE or PE data. Edit the path to trimmomatic and run:
Single-end: 01_scripts/01_trimming.sh
Paired-end: 01_scripts/01_trimming_PE.sh

Trimmed data quality check:

## PE only
# Move singleton output aside, not to be used
mv 03_trimmed/*.single.fq.gz 03_trimmed/singles       

## All
fastqc 03_trimmed/*.paired.fq.gz -o 03_trimmed/fastqc_trimmed -t 12         
multiqc -o 03_trimmed/fastqc_trimmed 03_trimmed/fastqc_trimmed

02. Align against a reference transcriptome

OR if using a reference genome

02.A. Multi-map reads against the reference transcriptome

Index
Update REFERENCE variable and index decompressed reference transcriptome with bowtie2.
01_scripts/01_bowtie2_build.sh
...this only needs to be done once for a reference.

Align
Align each sample from 03_trimmed, inserting read group IDs.
Using samtools, convert to .bam, sort, index, and delete .sam and unsorted .bam.
Single-end: 01_scripts/02_bowtie2_aln_SE.sh
Paired-end: 01_scripts/02_bowtie2_aln_PE.sh

02.B. Quantify alignments using eXpress

Use the sorted bam files to quantify transcript abundances.
01_scripts/03_express.sh

02.C. Extract effective counts from eXpress files into edgeR input

Uses files 05_gx_levels/*.xprs. Open the script 01_scripts/utility_scripts/prepare_gxlevels_matrix.R in R and use interactively.
This will output a table entitled out.matrix.csv, which can be used as an input to edgeR.

03. Align against a reference genome

OR if using reference transcriptome

3A. Multi-map reads against a reference genome

Index
The genome should already be prepared as described above.

Align
Align PE reads to the genome, convert to BAM, and sort:
./01_scripts/02_hisat2_aln_PE_to_stringtie.sh
Note: requires filenames in format of _R[1|2].paired.fq.gz

(experimental currently) If planning to identify novel transcripts (and known), follow section (3B). If planning to only use the known transcripts from a GFF, then use 01_scripts/04_ST_est_abund_known_only.sh, pointing to the reference GTF or GFF, then skip ahead to section (4B).

3B. Generate a reference and de novo gff using StringTie

Per sample, assemble transcripts based on BAM and ref GFF
Note: the supplied GFF (if exists) should already be in your reference folder (see here)[https://github.com/bensutherland/Simple_reads_to_counts/blob/master/README.md#prepare-the-assembly].

Update the following script to the guiding GFF (if supplied with genome), and launch:
01_scripts/03a_stringtie_bam_to_gtf.sh

For each sample, stringtie will assemble transcripts based on the reference genome annotation and will find novel transcripts (unannotated) in the reference genome.

Prepare mergelist for StringTie
Generate 00_archive/mergelist.txt, which includes each sample's GTF, one per line:
01_scripts/03b_create_mergelist.sh

StringTie merge Merge reference GFF and per-sample GTFs into a final, non-redundant GTF (i.e., 04_mapped/stringtie_merged.gtf).
Update to point to the reference GFF and launch:
01_scripts/03c_stringtie_merge.sh

Evaluate transcript/ gene assemblies Run gffcompare to generate statistics based on your de novo and reference transcripts ./01_scripts/03d_gffcompare.sh
...the output will go to 04_mapped/gffcompare/merged.*

04. Extract feature counts from bam files using the GTF

4A. StringTie extract read counts into ctab format

Estimate abundances with StringTie run with -e parameter:
01_scripts/04_stringtie_estimate_abundances.sh
Per sample, a folder will be created in 05_gx_levels with a new .gtf and ctab files.
note: for more information, see Using StringTie with DESeq2 and edgeR

4B. Create sample and path list for extracting expression values

Note: this step is only needed if you used StringTie to identify novel transcripts, and therefore have a gtf for each sample. If you simply used StringTie to extract known transcript abundances, then skip to prepDE.py step below.

Generate a text file with all sample names and relative paths:
01_scripts/05_build_sample_list.sh
...will output to 00_archive/sample_list.txt

4C. Convert gene expression values from ctab format into a count matrix .csv file for edgeR

Use prepDE.py script from StringTie to generate count matrices for genes and transcripts based on the coverage values from the above:
If you created a sample list with per-sample GTF to find novel transcripts:
prepDE.py -i 00_archive/sample_list.txt -g 05_gx_levels/gene_counts.csv -t 05_gx_levels/transcript_counts.csv --length 150 note: as needed, update the length flag with the average read length, which can be found from the multiQC output.

If you did not search for novel transcripts, and therefore do not have per-sample GTFs:
prepDE.py -i 05_gx_levels -g 05_gx_levels/gene_counts.csv -t 05_gx_levels/transcript_counts.csv --length 125

Outputs of pipeline

If using a reference genome, the main data outputs to use will be:
05_gx_levels/gene_counts.csv
05_gx_levels/transcript_counts.csv

Next: gene expression analysis (edgeR or deseq2 instructions)

bensutherland / simple_reads_to_counts Goto Github PK

simple_reads_to_counts's Introduction