berendeanicolae/hyperledger_on_swarm

hyperledger_on_swarm

This repository is for deploying Hyperledger Fabric on Swarm cluster easily.

• Supported version : 1.0.0 GA and above (1.0.1 currently)

• You can specify number of each component. Supported components are:
  • Number of Organizations (CA will be one per a Organization)
  • Number of Peer per a Organization
  • Number of Orderer
  • Number of Kafka
  • Number of Zookeeper
  • Domain name

Instructions

Pre-reqs

• 1 or more machines with Linux
• Install Docker >= 1.13

Create Docker Swarm cluster

• Create one or more master hosts and other worker hosts

  • Open ports for Swarm. On ALL hosts, (eg, CentOS)

  firewall-cmd --permanent --zone=public --add-port=2377/tcp --add-port=7946/tcp --add-port=7946/udp --add-port=4789/udp
  firewall-cmd --reload
  

  • I think opening swarm ports only is sufficient because all nodes communicates thru overlay network.

  • on master host,

  docker swarm init
  

  • You can see like below,

  Swarm initialized: current node (dxn1zf6l61qsb1josjja83ngz) is now a manager.
  
  To add a worker to this swarm, run the following command:
  
    docker swarm join \
    --token SWMTKN-1-49nj1cmql0jkz5s954yi3oex3nedyz0fb0xx14ie39trti4wxv-8vxv8rssmk743ojnwacrr2e7c \
    192.168.99.100:2377
  
  To add a manager to this swarm, run 'docker swarm join-token manager' and follow the instructions.
  

  • Use last command to join worker host to Swarm cluster eg, on worker hosts,

  docker swarm join \
    --token SWMTKN-1-49nj1cmql0jkz5s954yi3oex3nedyz0fb0xx14ie39trti4wxv-8vxv8rssmk743ojnwacrr2e7c \
    192.168.99.100:2377
  

Create overlay network

• Create overlay network which will be used as path between hyperledger nodes
  • on Master host,

    docker network create --attachable --driver overlay --subnet=10.200.1.0/24 hyperledger-ov
    

Get Hyperledger Fabric artifacts and binaries

• As encryption keys and artifacts share same path, you need to put them on same location.
  • In this case, the location is '/nfs-share' (I personally use NFS)
  • For example,

   cd /nfs-share
   git clone https://github.com/hyperledger/fabric-samples.git
   cd fabric-samples
   curl -sSL https://goo.gl/iX9dek | bash
  

• I recommend you get ccenv image on all host. Fabric does not pull the latest ccenv image for you. so on ALL host,

  docker pull hyperledger/fabric-ccenv:x86_64-1.0.0
  

Generate the artifacts

• clone this git

  cd first-network
  git clone https://github.com/ChoiSD/hyperledger_on_swarm.git
  

• copy config generator & crypto-config generating script

  cp hyperledger_on_swarm/generateArtifacts.sh $PWD
  cp hyperledger_on_swarm/genConfig/genConfig $PWD
  

• generate config file for your own configuration. For example,

  ./genConfig -domain sdchoi.com -Kafka 3 -Orderer 5 -Zookeeper 3 -Orgs 4 -Peer 4
  

  For information,

  ./genConfig -h
  

• generate artifacts

  ./generateArtifacts.sh -c <CHANNEL-NAME> -d <DOMAIN-NAME> -o <NUM-ORGS>
  

  For example,

  ./generateArtifacts.sh -c sdchannel -d sdchoi.com -o 4
  

• share two directories (channel-artifacts, crypto-config) among all hosts with same path

Deploy Hyperledger Fabric nodes

• On Master host,
  • If you choose to configure with multiple orderers,

  docker stack deploy -c hyperledger-zookeeper.yaml hyperledger-zk
  docker stack deploy -c hyperledger-kafka.yaml hyperledger-kafka
  docker stack deploy -c hyperledger-orderer.yaml hyperledger-orderer
  docker stack deploy -c hyperledger-couchdb.yaml hyperledger-couchdb
  docker stack deploy -c hyperledger-peer.yaml hyperledger-peer
  docker stack deploy -c hyperledger-ca.yaml hyperledger-ca
  docker stack deploy -c hyperledger-cli.yaml hyperledger-cli
  

  • If you choose to configure in 'solo' mode

  docker stack deploy -c hyperledger-orderer.yaml hyperledger-orderer
  docker stack deploy -c hyperledger-couchdb.yaml hyperledger-couchdb
  docker stack deploy -c hyperledger-peer.yaml hyperledger-peer
  docker stack deploy -c hyperledger-ca.yaml hyperledger-ca
  docker stack deploy -c hyperledger-cli.yaml hyperledger-cli
  

  • I recommend you to check services' status after every deploy.

  docker service ls
  

  • If something is wrong, check it, remove the stack, correct it and re-deploy.
  • In case you want to check if network is OK or ports are opened on containers, you can use busybox. busybox has ping, telnet, etc.

  docker stack deploy -c busybox.yaml busybox
  

Do the rest of Getting Started of Hyperledger Fabric Documentation

• Create & Join channel, Install, Instantiate & Query chaincodes
  • NOTE: environment variables & orderer's name should be corrected to work properly.

Examples

• Generate Hyperledger Fabric config

  ./genConfig -domain sdchoi.com -Kafka 3 -Orderer 2 -Zookeeper 3 -Orgs 2 -Peer 2
  

• Generate artifacts

  ./generateArtifacts.sh -c sdchannel -d sdchoi.com -o 2
  

• Deploy Hyperledger Fabric

  docker stack deploy -c hyperledger-zookeeper.yaml hyperledger-zk
  docker stack deploy -c hyperledger-kafka.yaml hyperledger-kafka
  docker stack deploy -c hyperledger-orderer.yaml hyperledger-orderer
  docker stack deploy -c hyperledger-couchdb.yaml hyperledger-couchdb
  docker stack deploy -c hyperledger-peer.yaml hyperledger-peer
  docker stack deploy -c hyperledger-ca.yaml hyperledger-ca
  docker stack deploy -c hyperledger-cli.yaml hyperledger-cli
  

• Attach to cli container

  docker exec -it $(docker ps --format "table {{.ID}}" -f "label=com.docker.stack.namespace=hyperledger-cli" | tail -1) bash
  

• Create a channel

  export CHANNEL_NAME=sdchannel
  peer channel create -o orderer0.sdchoi.com:7050 -c $CHANNEL_NAME -f ./channel-artifacts/channel.tx --tls $CORE_PEER_TLS_ENABLED --cafile /opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/ordererOrganizations/sdchoi.com/orderers/orderer0.sdchoi.com/msp/tlscacerts/tlsca.sdchoi.com-cert.pem
  

• Join a channel

  peer channel join -b sdchannel.block
  peer channel list
  

• Install & Initiate Chaincode

  peer chaincode install -n mycc -v 1.0 -p github.com/hyperledger/fabric/examples/chaincode/go/chaincode_example02
  peer chaincode instantiate -o orderer0.sdchoi.com:7050 --tls $CORE_PEER_TLS_ENABLED --cafile /opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/ordererOrganizations/sdchoi.com/orderers/orderer0.sdchoi.com/msp/tlscacerts/tlsca.sdchoi.com-cert.pem -C $CHANNEL_NAME -n mycc -v 1.0 -c '{"Args":["init","a", "100", "b","200"]}' -P "OR ('Org1MSP.member','Org2MSP.member')"
  

• Query & Invoke Chaincode

  peer chaincode query -C $CHANNEL_NAME -n mycc -c '{"Args":["query","a"]}'
  peer chaincode invoke -o orderer1.sdchoi.com:7050  --tls $CORE_PEER_TLS_ENABLED --cafile /opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/ordererOrganizations/sdchoi.com/orderers/orderer1.sdchoi.com/msp/tlscacerts/tlsca.sdchoi.com-cert.pem  -C $CHANNEL_NAME -n mycc -c '{"Args":["invoke","a","b","10"]}'
  peer chaincode query -C $CHANNEL_NAME -n mycc -c '{"Args":["query","a"]}'
  peer chaincode query -C $CHANNEL_NAME -n mycc -c '{"Args":["query","b"]}'