hacker-hotkey's Introduction

Hacker HotKey

This repo contains example software for the Kernelcon 2021 Hack Live! badge - the Hacker HotKey.

Default Hotkey Mapping

Hacker Hotkey is configured by default to function with Kernelcon Hack Live! The four Launch buttons on the top row attempt to identify your host operating system and use run commands to launch the web sites displayed. The second row if voting buttons type the vote commands to participate in polls. Of course Hacker Hotkey can be configured however you like after Hack Live...

Compiling and uploading firmware

connect micro USB cable
- needs to be a data cable, not just a charging/power cable
open aduino IDE
- install if necessary
  - https://www.arduino.cc/en/Guide
- install keyboard library if necessary:
  - tools -> Manage Libraries -> search "keyboard" -> install
select "Arduino Leonardo" board type
- install Arduino boards if necessary:
  - tools -> Boards Manager -> search "Arduino AVR Boards" -> install
select com port
- tools -> port

Verify port comms work

tools -> "Get Board Info"

should return something like

BN: Arduino Leonardo
VID: 0x2341
PID: 0x8036
SN: Upload any sketch to obtain it

choose your code
- hacker hotkey advanced
  - More advanced firmware if you just want to create powerful hotkeys without coding
  - Refer to the Hacker Hotkey Advanced guide for configuring hotkeys
- hacker hotkey sample
  - A simple firmware example that is a good starting point for developing your own code
upload code
- sketch -> upload
- Arduino IDE will compile and upload firmware to the Hacker Hotkey, which you can use immediately after upload (no unplugging, reseting, etc required)