bityangke/shake-shake

2.72% on CIFAR-10

#Shake-Shake regularization of 3-branch residual networks

This repository contains the code for the paper Shake-Shake regularization of 3-branch residual networks.

The code is based on [fb.resnet.torch] (https://github.com/facebook/fb.resnet.torch).

##Table of Contents 0. Introduction 0. Results 0. Usage 0. Contact

##Introduction This method aims at helping computer vision practitioners faced with an overfit problem. The idea is to replace, in a 3-branch ResNet, the standard summation of residual branches by a stochastic affine combination. The largest tested model improves on the best single shot published result on CIFAR-10 by reaching 2.72% test error.

Figure 1: Left: Forward training pass. Center: Backward training pass. Right: At test time.

##Results The base network is a 26 2x32d ResNet (i.e. the network has a depth of 26, 2 residual branches and the first residual block has a width of 32). "Shake" means that all scaling coefficients are overwritten with new random numbers before the pass. "Even" means that all scaling coefficients are set to 0.5 before the pass. "Keep" means that we keep, for the backward pass, the scaling coefficients used during the forward pass. "Batch" means that, for each residual block, we apply the same scaling coefficient for all the images in the mini-batch. "Image" means that, for each residual block, we apply a different scaling coefficient for each image in the mini-batch. The numbers in the Table below represent the average of 3 runs except for the best model which was run 5 times.

Forward	Backward	Level	26 2x32d	26 2x64d	26 2x96d
Even	Even	Batch	4.13	3.64	3.44
Even	Shake	Batch	4.34	-	-
Shake	Keep	Batch	3.98	-	-
Shake	Even	Batch	3.40	3.24	-
Shake	Shake	Batch	3.54	3.01	-
Shake	Shake	Image	3.48	2.86	2.72

Table 1: Error rates (%) on CIFAR-10

##Usage 0. Install [fb.resnet.torch] (https://github.com/facebook/fb.resnet.torch) and optnet.

1. Download Shake-Shake

git clone https://github.com/xgastaldi/shake-shake.git

2. Copy the elements in the shake-shake folder and paste them in the fb.resnet.torch folder. This will overwrite 5 files (main.lua, train.lua, opts.lua, checkpoints.lua and models/init.lua) and add 3 new files (models/shakeshake.lua, models/shakeshakeblock.lua and models/mulconstantslices.lua).
3. You can train a 26 2x32d "Shake-Shake-Image" ResNet on CIFAR-10+ using

th main.lua -dataset cifar10 -nGPU 1 -batchSize 128 -depth 26 -shareGradInput false -optnet true -nEpochs 1800 -netType shakeshake -lrShape cosine -widenFactor 2 -LR 0.2 -forwardShake true -backwardShake true -shakeImage true

You can train a 26 2x96d "Shake-Shake-Image" ResNet on 2 GPUs using

CUDA_VISIBLE_DEVICES=0,1 th main.lua -dataset cifar10 -nGPU 2 -batchSize 128 -depth 26 -shareGradInput false -optnet true -nEpochs 1800 -netType shakeshake -lrShape cosine -widenFactor 6 -LR 0.2 -forwardShake true -backwardShake true -shakeImage true

A widenFactor of 2 corresponds to 32d, 4 to 64d, etc..

###Note Changes made to fb.resnet.torch files:

main.lua
Ln 17, 54-59, 81-88: Adds a log (courtesy of Sergey Zagoruyko)

train.lua
Ln 36-38 58-60 206-213: Adds the cosine learning rate function
Ln 88-89: Adds the learning rate to the elements printed on screen

opts.lua
Ln 57-62: Adds Shake-Shake options

checkpoints.lua
Ln 15: Adds require 'models/shakeshakeblock'
Ln 59-60: Avoids using deepcopy (it doesn't seem to be compatible with the BN in shakeshakeblock)
Ln 66-81: Saves only the best model

init.lua
Ln 91-92: Adds require 'models/mulconstantslices' and require 'models/shakeshakeblock'

The main model is in shakeshake.lua. The residual block model is in shakeshakeblock.lua. mulconstantslices.lua is just an extension of nn.mulconstant that multiplies elements of a vector with image slices of a mini-batch tensor.

##Contact xgastaldi.mba2011 at london.edu
Any discussions, suggestions and questions are welcome!