blackmagic-debug/black-magic-org

The Black Magic Project Website

black-magic-org's Issues

VSCode integration

Describe how to use BMP with an embedded project within VSCode.

Offer configuration files as part of it.

Rust integration

Describe how to use BMP as part of a Rust project.

Including a flash script and potentially an example project as a template.

hacking/target-mm32.md

fyi. target-mm32.md does not show up in navigation sidebar. Did a "python ./run_livereload.py" and got:

checking consistency... /home/koen/src/black-magic-org/hacking/target-mm32.md: WARNING: document isn't included in any toctree

Schematic of BMP 2.3

The Schematic of the BMP 2.3 is still missing. Would it be possible to add that? If not the TODO Note should be replaced with a closed source notice.

Terminology: Black Magic Debug App or Black Magic App

On the index page of the website the Black Magic Debug App (BMDA) is mentioned. On the terminology page Black Magic App is used.

Similarly, the index page mentions Black Magic Debug firmware, whereas the terminology page defines Black Magic Firmware (BMF).

Using different terminology in different places is not consistent. Which of the two is the preferred terminology?

If you let me know I can create a pull request to update the respective pages.

Command syntax for "mon jtag_scan <list of IR lengths>" not documented

Running "mon jtag_scan help" does not list the possible command options. I did not find an example in the wiki neither.

404: Not Found error during local previewing

Following the instructions in the readme, I am able to run the script ./run_livereload.py within the env environment.

The output is:

[I yymmdd hh:mm:ss server:335] Serving on http://127.0.0.1:5500
[I yymmdd hh:mm:ss handlers:62] Start watching changes
[I yymmdd hh:mm:ss handlers:64] Start detecting changes

Once I visit http://127.0.0.1:5500/, an extra row is added to the output:

[W yymmdd hh:mm:ss web:2344] 404 GET / (127.0.0.1) 1.11ms

And the page displays:
404: Not Found

Can you help me figure out what is causing this 404 error?

I'm using:

• MacOS 13.3.1 on Apple Silicon
• Python 3.11.3

FAQ lists obsoloete / no longer produced cables

This is just FYI:

The two parts listed in the FAQ (both the old github wiki and the new black-magic.org) list pre-crimed cables that are obsoloete and no longre produced:

The UART cable can also be built with pre crimped wires:
Digi-key red 150mm pre crimped cable
Digi-key red 300mm pre crimped cable

Add segger 20pin extra context

See #30 (comment)