bommadsen/sht1x-c-driver

SHT1x (SHT10, SHT11, SHT15) humidity and temperature sensor C driver library for Microchip or similar MCU's.

SHT1x-C-driver

SHT1x (SHT10, SHT11, SHT15) humidity and temperature sensor C driver library for Microchip or similar MCU's.

Requirements

The driver needs access to two blocking delay routines:

• delay_us(t) - should delay for t microseconds
• delay_ms(t) - should delay for t milliseconds

Generic library math.h is required for the natural logarithm - log()

Configuration

SHT1x is connected via CLK and DAT pins. These must be configured in "sht15.h" respectively by their tri-state register (to toggle input/output-mode) and their port-bit, to enable reading and writing the IO's.