boonious / open_id_authentication Goto Github PK
View Code? Open in Web Editor NEWThis project forked from rails/open_id_authentication
OpenID authentication plugin
Home Page: http://rubyonrails.org
This project forked from rails/open_id_authentication
OpenID authentication plugin
Home Page: http://rubyonrails.org
OpenIdAuthentication ==================== Provides a thin wrapper around the excellent ruby-openid gem from JanRan. Be sure to install that first: gem install ruby-openid To understand what OpenID is about and how it works, it helps to read the documentation for lib/openid/consumer.rb from that gem. The specification used is http://openid.net/specs/openid-authentication-2_0.html. Prerequisites ============= OpenID authentication uses the session, so be sure that you haven't turned that off. Alternatively, you can use the file-based store, which just relies on on tmp/openids being present in RAILS_ROOT. But be aware that this store only works if you have a single application server. And it's not safe to use across NFS. It's recommended that you use the database store if at all possible. To use the file-based store, you'll also have to add this line to your config/environment.rb: OpenIdAuthentication.store = :file This particular plugin also relies on the fact that the authentication action allows for both POST and GET operations. If you're using RESTful authentication, you'll need to explicitly allow for this in your routes.rb. The plugin also expects to find a root_url method that points to the home page of your site. You can accomplish this by using a root route in config/routes.rb: map.root :controller => 'articles' This plugin relies on Rails Edge revision 6317 or newer. Example ======= This example is just to meant to demonstrate how you could use OpenID authentication. You might well want to add salted hash logins instead of plain text passwords and other requirements on top of this. Treat it as a starting point, not a destination. Note that the User model referenced in the simple example below has an 'identity_url' attribute. You will want to add the same or similar field to whatever model you are using for authentication. Also of note is the following code block used in the example below: authenticate_with_open_id do |result, identity_url| ... end In the above code block, 'identity_url' will need to match user.identity_url exactly. 'identity_url' will be a string in the form of 'http://example.com' - If you are storing just 'example.com' with your user, the lookup will fail. There is a handy method in this plugin called 'normalize_url' that will help with validating OpenID URLs. OpenIdAuthentication.normalize_url(user.identity_url) The above will return a standardized version of the OpenID URL - the above called with 'example.com' will return 'http://example.com/' It will also raise an InvalidOpenId exception if the URL is determined to not be valid. Use the above code in your User model and validate OpenID URLs before saving them. config/routes.rb map.root :controller => 'articles' map.resource :session app/views/sessions/new.erb <% form_tag(session_url) do %> <p> <label for="name">Username:</label> <%= text_field_tag "name" %> </p> <p> <label for="password">Password:</label> <%= password_field_tag %> </p> <p> ...or use: </p> <p> <label for="openid_identifier">OpenID:</label> <%= text_field_tag "openid_identifier" %> </p> <p> <%= submit_tag 'Sign in', :disable_with => "Signing in…" %> </p> <% end %> app/controllers/sessions_controller.rb class SessionsController < ApplicationController def create if using_open_id? open_id_authentication else password_authentication(params[:name], params[:password]) end end protected def password_authentication(name, password) if @current_user = @account.users.authenticate(params[:name], params[:password]) successful_login else failed_login "Sorry, that username/password doesn't work" end end def open_id_authentication authenticate_with_open_id do |result, identity_url| if result.successful? if @current_user = @account.users.find_by_identity_url(identity_url) successful_login else failed_login "Sorry, no user by that identity URL exists (#{identity_url})" end else failed_login result.message end end end private def successful_login session[:user_id] = @current_user.id redirect_to(root_url) end def failed_login(message) flash[:error] = message redirect_to(new_session_url) end end If you're fine with the result messages above and don't need individual logic on a per-failure basis, you can collapse the case into a mere boolean: def open_id_authentication authenticate_with_open_id do |result, identity_url| if result.successful? && @current_user = @account.users.find_by_identity_url(identity_url) successful_login else failed_login(result.message || "Sorry, no user by that identity URL exists (#{identity_url})") end end end Simple Registration OpenID Extension ==================================== Some OpenID Providers support this lightweight profile exchange protocol. See more: http://www.openidenabled.com/openid/simple-registration-extension You can support it in your app by changing #open_id_authentication def open_id_authentication(identity_url) # Pass optional :required and :optional keys to specify what sreg fields you want. # Be sure to yield registration, a third argument in the #authenticate_with_open_id block. authenticate_with_open_id(identity_url, :required => [ :nickname, :email ], :optional => :fullname) do |result, identity_url, registration| case result.status when :missing failed_login "Sorry, the OpenID server couldn't be found" when :invalid failed_login "Sorry, but this does not appear to be a valid OpenID" when :canceled failed_login "OpenID verification was canceled" when :failed failed_login "Sorry, the OpenID verification failed" when :successful if @current_user = @account.users.find_by_identity_url(identity_url) assign_registration_attributes!(registration) if current_user.save successful_login else failed_login "Your OpenID profile registration failed: " + @current_user.errors.full_messages.to_sentence end else failed_login "Sorry, no user by that identity URL exists" end end end end # registration is a hash containing the valid sreg keys given above # use this to map them to fields of your user model def assign_registration_attributes!(registration) model_to_registration_mapping.each do |model_attribute, registration_attribute| unless registration[registration_attribute].blank? @current_user.send("#{model_attribute}=", registration[registration_attribute]) end end end def model_to_registration_mapping { :login => 'nickname', :email => 'email', :display_name => 'fullname' } end Attribute Exchange OpenID Extension =================================== Some OpenID providers also support the OpenID AX (attribute exchange) protocol for exchanging identity information between endpoints. See more: http://openid.net/specs/openid-attribute-exchange-1_0.html Accessing AX data is very similar to the Simple Registration process, described above -- just add the URI identifier for the AX field to your :optional or :required parameters. For example: authenticate_with_open_id(identity_url, :required => [ :email, 'http://schema.openid.net/birthDate' ]) do |result, identity_url, registration| This would provide the sreg data for :email, and the AX data for 'http://schema.openid.net/birthDate' Copyright (c) 2007 David Heinemeier Hansson, released under the MIT license
A declarative, efficient, and flexible JavaScript library for building user interfaces.
๐ Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. ๐๐๐
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google โค๏ธ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.