None of my virtual manual fixed sensors are loading anymore

[bdormael]

None of my virtual manual fixed sensors are loading anymore

[bramstroker]

@gieljnssns That's strange, nothing really changed regarding to the sensor setup routine compared to the other beta versions.

Could you please create a new issue when you still experience this after consequetive restarts?

[bdormael]

thx for the quick fix, all working again :-)

[bramstroker]

You must be using one of the beta version of powercalc, as it seems remote loading logic version is triggered. And this is not in stable release yet.

If so please let me know which beta version you are running on.

[gieljnssns]

1.12.0beta2

[bramstroker]

I see. I have moved powercalc API's to final location, tried to keep the old endpoint still available, but failed into doing that properly.
I have just release v1.12-beta.6 which should resolve your issues.

I notice there is an issue were all the profiles are downloaded again after each startup.
So your startup times will be a bit delayed everytime.

I'll fix that last issue after F1 race is finished ;-).

[gieljnssns]

Bèta 6 works.
only this one

Platform powercalc does not generate unique IDs. ID Unifi POE_energy is already used by sensor.unifi_poe_verbruik_verbruik - ignoring sensor.unifi_poe_verbruik_verbruik

[bramstroker]

Btw, regarding the original issue. I have also fixed the old API URL, so older beta versions 1-5 should also work correctly again.

[purcell-lab]

Thanks beta6 fixed my issue:
https://community.home-assistant.io/t/powercalc-virtual-power-sensors/318515/941?u=markpurcell

[bipsendk]

Got same issue yesterday when I updated to 1.11.8 ...

Update: Solved by updating HA to 2024.4.4