@bmalinowsky I have the following weird behaviour on the KNX bus when trying to read memory locations from devices. I am using a TUNNEL setup, connection-oriented Destinations. The behaviour is the same for all devices, all memory locations. There is one call made to readMemory() in a loop, but loops until there is no exception thrown and the number of byte[] read is meaningful.
This is part of a little routine where I read out the PID.TABLE_REFERENCE of the Address Table Object Index and then use the returned data to read out the # addresses, the Ind. Address and all the Group Addresses used by the KNX Actor.
It is a bit a lengthy log, but you can see that 4 attempts are made to read a memory location, then it fails with a "send data connected failed", but it works straight away on attempt 1 in the next cycle. Does this indicate timing issues at the end of the KNX actor, or on the bus itself?
2016-04-21 09:51:06.559 [DEBUG] [.k.h.KNXBridgeBaseThingHandler:1070 ] - Trying to read 2 bytes at memory location 16387 for 1.1.11
2016-04-21 09:51:06.559 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: cEMI L-Data.req from 1.0.255 to 1.1.11, system priority hop count 6 repeat tpdu 81
2016-04-21 09:51:06.559 [DEBUG] [tuwien.auto.calimero :45 ] - KNXnet/IP Tunneling 192.168.0.10:3671: sending cEMI frame seq 155, wait for cEMI.con, attempt 1 (channel 38) 06 10 04 20 00 14 04 26 9b 00 11 00 b0 60 10 ff 11 0b 00 81
2016-04-21 09:51:06.559 [DEBUG] [tuwien.auto.calimero :45 ] - TL 192.168.0.10:3671: sending data connected to 1.1.11, attempt 1
2016-04-21 09:51:06.559 [INFO ] [tuwien.auto.calimero :43 ] - calimero.link.192.168.0.10:3671: send message to 1.1.11, wait for confirmation
2016-04-21 09:51:06.560 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: cEMI L-Data.req from 1.0.255 to 1.1.11, low priority hop count 6 repeat tpdu 46 02 40 03
2016-04-21 09:51:06.575 [DEBUG] [tuwien.auto.calimero :45 ] - KNXnet/IP Tunneling 192.168.0.10:3671: received cEMI L-Data.con with req 240
2016-04-21 09:51:06.575 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: confirmation of 1.1.11
2016-04-21 09:51:06.594 [DEBUG] [tuwien.auto.calimero :45 ] - KNXnet/IP Tunneling 192.168.0.10:3671: received cEMI L-Data.con with req 241
2016-04-21 09:51:06.594 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: confirmation of 1.1.11
2016-04-21 09:51:06.594 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: send to 1.1.11 succeeded
2016-04-21 09:51:06.595 [DEBUG] [tuwien.auto.calimero :45 ] - TL 192.168.0.10:3671: send disconnect to 1.1.11
2016-04-21 09:51:06.595 [INFO ] [tuwien.auto.calimero :43 ] - calimero.link.192.168.0.10:3671: send message to 1.1.11, wait for confirmation
2016-04-21 09:51:06.595 [DEBUG] [tuwien.auto.calimero :45 ] - KNXnet/IP Tunneling 192.168.0.10:3671: sending cEMI frame seq 156, wait for cEMI.con, attempt 1 (channel 38) 06 10 04 20 00 17 04 26 9c 00 11 00 bc 60 10 ff 11 0b 03 46 02 40 03
2016-04-21 09:51:06.596 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: cEMI L-Data.req from 1.0.255 to 1.1.11, system priority hop count 6 repeat tpdu 81
2016-04-21 09:51:06.618 [DEBUG] [tuwien.auto.calimero :45 ] - KNXnet/IP Tunneling 192.168.0.10:3671: received cEMI L-Data.con with req 242
2016-04-21 09:51:06.619 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: confirmation of 1.1.11
2016-04-21 09:51:06.619 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: send to 1.1.11 succeeded
2016-04-21 09:51:06.619 [DEBUG] [tuwien.auto.calimero :45 ] - KNXnet/IP Tunneling 192.168.0.10:3671: sending cEMI frame seq 157, wait for cEMI.con, attempt 1 (channel 38) 06 10 04 20 00 14 04 26 9d 00 11 00 b0 60 10 ff 11 0b 00 81
2016-04-21 09:51:06.638 [DEBUG] [tuwien.auto.calimero :45 ] - KNXnet/IP Tunneling 192.168.0.10:3671: received cEMI L-Data.con with req 243
2016-04-21 09:51:06.638 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: confirmation of 1.1.11
2016-04-21 09:51:06.638 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: send to 1.1.11 succeeded
2016-04-21 09:51:06.639 [DEBUG] [tuwien.auto.calimero :45 ] - TL 192.168.0.10:3671: send disconnect to 1.1.11
2016-04-21 09:51:06.639 [INFO ] [tuwien.auto.calimero :43 ] - calimero.link.192.168.0.10:3671: send message to 1.1.11, wait for confirmation
2016-04-21 09:51:06.639 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: cEMI L-Data.req from 1.0.255 to 1.1.11, system priority hop count 6 repeat tpdu 81
2016-04-21 09:51:06.639 [DEBUG] [tuwien.auto.calimero :45 ] - KNXnet/IP Tunneling 192.168.0.10:3671: sending cEMI frame seq 158, wait for cEMI.con, attempt 1 (channel 38) 06 10 04 20 00 14 04 26 9e 00 11 00 b0 60 10 ff 11 0b 00 81
2016-04-21 09:51:06.659 [DEBUG] [tuwien.auto.calimero :45 ] - KNXnet/IP Tunneling 192.168.0.10:3671: received cEMI L-Data.con with req 244
2016-04-21 09:51:06.659 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: confirmation of 1.1.11
2016-04-21 09:51:06.660 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: send to 1.1.11 succeeded
2016-04-21 09:51:06.660 [DEBUG] [tuwien.auto.calimero :45 ] - TL 192.168.0.10:3671: send disconnect to 1.1.11
2016-04-21 09:51:06.660 [INFO ] [tuwien.auto.calimero :43 ] - calimero.link.192.168.0.10:3671: send message to 1.1.11, wait for confirmation
2016-04-21 09:51:06.660 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: cEMI L-Data.req from 1.0.255 to 1.1.11, system priority hop count 6 repeat tpdu 81
2016-04-21 09:51:06.660 [DEBUG] [tuwien.auto.calimero :45 ] - KNXnet/IP Tunneling 192.168.0.10:3671: sending cEMI frame seq 159, wait for cEMI.con, attempt 1 (channel 38) 06 10 04 20 00 14 04 26 9f 00 11 00 b0 60 10 ff 11 0b 00 81
2016-04-21 09:51:06.679 [DEBUG] [tuwien.auto.calimero :45 ] - KNXnet/IP Tunneling 192.168.0.10:3671: received cEMI L-Data.con with req 245
2016-04-21 09:51:06.679 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: confirmation of 1.1.11
2016-04-21 09:51:06.679 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: send to 1.1.11 succeeded
2016-04-21 09:51:06.680 [DEBUG] [tuwien.auto.calimero :45 ] - TL 192.168.0.10:3671: send disconnect to 1.1.11
2016-04-21 09:51:06.680 [INFO ] [tuwien.auto.calimero :43 ] - calimero.link.192.168.0.10:3671: send message to 1.1.11, wait for confirmation
2016-04-21 09:51:06.680 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: cEMI L-Data.req from 1.0.255 to 1.1.11, system priority hop count 6 repeat tpdu 81
2016-04-21 09:51:06.680 [DEBUG] [tuwien.auto.calimero :45 ] - KNXnet/IP Tunneling 192.168.0.10:3671: sending cEMI frame seq 160, wait for cEMI.con, attempt 1 (channel 38) 06 10 04 20 00 14 04 26 a0 00 11 00 b0 60 10 ff 11 0b 00 81
2016-04-21 09:51:06.700 [DEBUG] [tuwien.auto.calimero :45 ] - KNXnet/IP Tunneling 192.168.0.10:3671: received cEMI L-Data.con with req 246
2016-04-21 09:51:06.700 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: confirmation of 1.1.11
2016-04-21 09:51:06.700 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: send to 1.1.11 succeeded
2016-04-21 09:51:06.701 [DEBUG] [tuwien.auto.calimero :45 ] - TL 192.168.0.10:3671: send disconnect to 1.1.11
2016-04-21 09:51:06.701 [INFO ] [tuwien.auto.calimero :43 ] - calimero.link.192.168.0.10:3671: send message to 1.1.11, wait for confirmation
2016-04-21 09:51:06.701 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: cEMI L-Data.req from 1.0.255 to 1.1.11, system priority hop count 6 repeat tpdu 81
2016-04-21 09:51:06.701 [DEBUG] [tuwien.auto.calimero :45 ] - KNXnet/IP Tunneling 192.168.0.10:3671: sending cEMI frame seq 161, wait for cEMI.con, attempt 1 (channel 38) 06 10 04 20 00 14 04 26 a1 00 11 00 b0 60 10 ff 11 0b 00 81
2016-04-21 09:51:06.721 [DEBUG] [tuwien.auto.calimero :45 ] - KNXnet/IP Tunneling 192.168.0.10:3671: received cEMI L-Data.con with req 247
2016-04-21 09:51:06.722 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: confirmation of 1.1.11
2016-04-21 09:51:06.722 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: send to 1.1.11 succeeded
2016-04-21 09:51:06.722 [DEBUG] [tuwien.auto.calimero :45 ] - TL 192.168.0.10:3671: send disconnect to 1.1.11
2016-04-21 09:51:06.722 [INFO ] [tuwien.auto.calimero :43 ] - calimero.link.192.168.0.10:3671: send message to 1.1.11, wait for confirmation
2016-04-21 09:51:06.722 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: cEMI L-Data.req from 1.0.255 to 1.1.11, system priority hop count 6 repeat tpdu 81
2016-04-21 09:51:06.722 [DEBUG] [tuwien.auto.calimero :45 ] - KNXnet/IP Tunneling 192.168.0.10:3671: sending cEMI frame seq 162, wait for cEMI.con, attempt 1 (channel 38) 06 10 04 20 00 14 04 26 a2 00 11 00 b0 60 10 ff 11 0b 00 81
2016-04-21 09:51:06.742 [DEBUG] [tuwien.auto.calimero :45 ] - KNXnet/IP Tunneling 192.168.0.10:3671: received cEMI L-Data.con with req 248
2016-04-21 09:51:06.742 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: confirmation of 1.1.11
2016-04-21 09:51:06.742 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: send to 1.1.11 succeeded
2016-04-21 09:51:08.220 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: indication from 1.4.11
2016-04-21 09:51:08.223 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: indication from 1.3.102
2016-04-21 09:51:09.619 [DEBUG] [tuwien.auto.calimero :45 ] - TL 192.168.0.10:3671: sending data connected to 1.1.11, attempt 2
2016-04-21 09:51:09.619 [INFO ] [tuwien.auto.calimero :43 ] - calimero.link.192.168.0.10:3671: send message to 1.1.11, wait for confirmation
2016-04-21 09:51:09.619 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: cEMI L-Data.req from 1.0.255 to 1.1.11, low priority hop count 6 repeat tpdu 46 02 40 03
2016-04-21 09:51:09.620 [DEBUG] [tuwien.auto.calimero :45 ] - KNXnet/IP Tunneling 192.168.0.10:3671: sending cEMI frame seq 163, wait for cEMI.con, attempt 1 (channel 38) 06 10 04 20 00 17 04 26 a3 00 11 00 bc 60 10 ff 11 0b 03 46 02 40 03
2016-04-21 09:51:09.622 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: indication from 1.1.51
2016-04-21 09:51:09.625 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: indication from 1.1.51
2016-04-21 09:51:09.646 [DEBUG] [tuwien.auto.calimero :45 ] - KNXnet/IP Tunneling 192.168.0.10:3671: received cEMI L-Data.con with req 253
2016-04-21 09:51:09.646 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: confirmation of 1.1.11
2016-04-21 09:51:09.647 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: send to 1.1.11 succeeded
2016-04-21 09:51:10.358 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: indication from 1.1.23
2016-04-21 09:51:10.374 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: indication from 1.1.23
2016-04-21 09:51:10.437 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: indication from 1.1.23
2016-04-21 09:51:10.985 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: indication from 1.1.15
2016-04-21 09:51:10.989 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: indication from 1.1.13
2016-04-21 09:51:11.185 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: indication from 1.1.27
2016-04-21 09:51:11.239 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: indication from 1.1.27
2016-04-21 09:51:12.213 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: indication from 1.1.14
2016-04-21 09:51:12.217 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: indication from 1.1.12
2016-04-21 09:51:12.229 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: indication from 1.1.26
2016-04-21 09:51:12.646 [DEBUG] [tuwien.auto.calimero :45 ] - TL 192.168.0.10:3671: sending data connected to 1.1.11, attempt 3
2016-04-21 09:51:12.647 [INFO ] [tuwien.auto.calimero :43 ] - calimero.link.192.168.0.10:3671: send message to 1.1.11, wait for confirmation
2016-04-21 09:51:12.647 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: cEMI L-Data.req from 1.0.255 to 1.1.11, low priority hop count 6 repeat tpdu 46 02 40 03
2016-04-21 09:51:12.647 [DEBUG] [tuwien.auto.calimero :45 ] - KNXnet/IP Tunneling 192.168.0.10:3671: sending cEMI frame seq 164, wait for cEMI.con, attempt 1 (channel 38) 06 10 04 20 00 17 04 26 a4 00 11 00 bc 60 10 ff 11 0b 03 46 02 40 03
2016-04-21 09:51:12.672 [DEBUG] [tuwien.auto.calimero :45 ] - KNXnet/IP Tunneling 192.168.0.10:3671: received cEMI L-Data.con with req 8
2016-04-21 09:51:12.673 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: confirmation of 1.1.11
2016-04-21 09:51:12.673 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: send to 1.1.11 succeeded
2016-04-21 09:51:13.442 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: indication from 1.1.26
2016-04-21 09:51:13.446 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: indication from 1.1.26
2016-04-21 09:51:13.450 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: indication from 1.1.26
2016-04-21 09:51:15.678 [DEBUG] [tuwien.auto.calimero :45 ] - TL 192.168.0.10:3671: sending data connected to 1.1.11, attempt 4
2016-04-21 09:51:15.678 [INFO ] [tuwien.auto.calimero :43 ] - calimero.link.192.168.0.10:3671: send message to 1.1.11, wait for confirmation
2016-04-21 09:51:15.678 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: cEMI L-Data.req from 1.0.255 to 1.1.11, low priority hop count 6 repeat tpdu 46 02 40 03
2016-04-21 09:51:15.679 [DEBUG] [tuwien.auto.calimero :45 ] - KNXnet/IP Tunneling 192.168.0.10:3671: sending cEMI frame seq 165, wait for cEMI.con, attempt 1 (channel 38) 06 10 04 20 00 17 04 26 a5 00 11 00 bc 60 10 ff 11 0b 03 46 02 40 03
2016-04-21 09:51:15.682 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: indication from 1.1.101
2016-04-21 09:51:15.707 [DEBUG] [tuwien.auto.calimero :45 ] - KNXnet/IP Tunneling 192.168.0.10:3671: received cEMI L-Data.con with req 13
2016-04-21 09:51:15.707 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: confirmation of 1.1.11
2016-04-21 09:51:15.707 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: send to 1.1.11 succeeded
2016-04-21 09:51:16.808 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: indication from 1.2.152
2016-04-21 09:51:16.812 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: indication from 1.2.152
2016-04-21 09:51:16.834 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: indication from 1.2.152
2016-04-21 09:51:16.869 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: indication from 1.2.152
2016-04-21 09:51:16.904 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: indication from 1.2.152
2016-04-21 09:51:16.966 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: indication from 1.1.151
2016-04-21 09:51:17.007 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: indication from 1.1.151
2016-04-21 09:51:17.046 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: indication from 1.1.151
2016-04-21 09:51:17.191 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: indication from 1.2.151
2016-04-21 09:51:17.226 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: indication from 1.2.151
2016-04-21 09:51:17.260 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: indication from 1.2.151
2016-04-21 09:51:17.305 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: indication from 1.2.151
2016-04-21 09:51:17.345 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: indication from 1.2.151
2016-04-21 09:51:18.051 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: indication from 1.1.151
2016-04-21 09:51:18.054 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: indication from 1.1.151
2016-04-21 09:51:18.358 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: indication from 1.1.24
2016-04-21 09:51:18.393 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: indication from 1.1.24
2016-04-21 09:51:18.456 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: indication from 1.1.24
2016-04-21 09:51:18.570 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: indication from 1.1.55
2016-04-21 09:51:18.620 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: indication from 1.1.55
2016-04-21 09:51:18.707 [INFO ] [tuwien.auto.calimero :43 ] - calimero.link.192.168.0.10:3671: send message to 1.1.11, wait for confirmation
2016-04-21 09:51:18.708 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: cEMI L-Data.req from 1.0.255 to 1.1.11, system priority hop count 6 repeat tpdu 81
2016-04-21 09:51:18.708 [DEBUG] [tuwien.auto.calimero :45 ] - KNXnet/IP Tunneling 192.168.0.10:3671: sending cEMI frame seq 166, wait for cEMI.con, attempt 1 (channel 38) 06 10 04 20 00 14 04 26 a6 00 11 00 b0 60 10 ff 11 0b 00 81
2016-04-21 09:51:18.728 [DEBUG] [tuwien.auto.calimero :45 ] - KNXnet/IP Tunneling 192.168.0.10:3671: received cEMI L-Data.con with req 34
2016-04-21 09:51:18.728 [ERROR] [.k.h.KNXBridgeBaseThingHandler:1092 ] - An exception occurred while trying to read the memory for '1.1.11' : send data connected failed
2016-04-21 09:51:18.728 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: confirmation of 1.1.11
2016-04-21 09:51:18.728 [DEBUG] [.k.h.KNXBridgeBaseThingHandler:1070 ] - Trying to read 2 bytes at memory location 16387 for 1.1.11
2016-04-21 09:51:18.728 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: send to 1.1.11 succeeded
2016-04-21 09:51:18.728 [DEBUG] [tuwien.auto.calimero :45 ] - TL 192.168.0.10:3671: disconnected from 1.1.11
2016-04-21 09:51:18.728 [INFO ] [tuwien.auto.calimero :43 ] - calimero.link.192.168.0.10:3671: send message to 1.1.11, wait for confirmation
2016-04-21 09:51:18.729 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: cEMI L-Data.req from 1.0.255 to 1.1.11, system priority hop count 6 repeat tpdu 80
2016-04-21 09:51:18.729 [DEBUG] [tuwien.auto.calimero :45 ] - KNXnet/IP Tunneling 192.168.0.10:3671: sending cEMI frame seq 167, wait for cEMI.con, attempt 1 (channel 38) 06 10 04 20 00 14 04 26 a7 00 11 00 b0 60 10 ff 11 0b 00 80
2016-04-21 09:51:18.748 [DEBUG] [tuwien.auto.calimero :45 ] - KNXnet/IP Tunneling 192.168.0.10:3671: received cEMI L-Data.con with req 35
2016-04-21 09:51:18.749 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: confirmation of 1.1.11
2016-04-21 09:51:18.749 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: send to 1.1.11 succeeded
2016-04-21 09:51:18.749 [DEBUG] [tuwien.auto.calimero :45 ] - TL 192.168.0.10:3671: connected with 1.1.11
2016-04-21 09:51:18.749 [DEBUG] [tuwien.auto.calimero :45 ] - TL 192.168.0.10:3671: sending data connected to 1.1.11, attempt 1
2016-04-21 09:51:18.749 [INFO ] [tuwien.auto.calimero :43 ] - calimero.link.192.168.0.10:3671: send message to 1.1.11, wait for confirmation
2016-04-21 09:51:18.750 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: cEMI L-Data.req from 1.0.255 to 1.1.11, low priority hop count 6 repeat tpdu 42 02 40 03
2016-04-21 09:51:18.750 [DEBUG] [tuwien.auto.calimero :45 ] - KNXnet/IP Tunneling 192.168.0.10:3671: sending cEMI frame seq 168, wait for cEMI.con, attempt 1 (channel 38) 06 10 04 20 00 17 04 26 a8 00 11 00 bc 60 10 ff 11 0b 03 42 02 40 03
2016-04-21 09:51:18.774 [DEBUG] [tuwien.auto.calimero :45 ] - KNXnet/IP Tunneling 192.168.0.10:3671: received cEMI L-Data.con with req 36
2016-04-21 09:51:18.774 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: confirmation of 1.1.11
2016-04-21 09:51:18.774 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: send to 1.1.11 succeeded
2016-04-21 09:51:18.837 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: indication from 1.1.11
2016-04-21 09:51:18.837 [INFO ] [tuwien.auto.calimero :43 ] - calimero.link.192.168.0.10:3671: send message to 1.1.11, wait for confirmation
2016-04-21 09:51:18.838 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: cEMI L-Data.req from 1.0.255 to 1.1.11, system priority hop count 6 repeat tpdu 81
2016-04-21 09:51:18.838 [DEBUG] [tuwien.auto.calimero :45 ] - KNXnet/IP Tunneling 192.168.0.10:3671: sending cEMI frame seq 169, wait for cEMI.con, attempt 1 (channel 38) 06 10 04 20 00 14 04 26 a9 00 11 00 b0 60 10 ff 11 0b 00 81
2016-04-21 09:51:18.858 [DEBUG] [tuwien.auto.calimero :45 ] - KNXnet/IP Tunneling 192.168.0.10:3671: received cEMI L-Data.con with req 38
2016-04-21 09:51:18.858 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: confirmation of 1.1.11
2016-04-21 09:51:18.858 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: send to 1.1.11 succeeded
2016-04-21 09:51:18.859 [INFO ] [tuwien.auto.calimero :43 ] - calimero.link.192.168.0.10:3671: send message to 1.1.11, wait for confirmation
2016-04-21 09:51:18.859 [DEBUG] [tuwien.auto.calimero :45 ] - TL 192.168.0.10:3671: positive ack by 1.1.11
2016-04-21 09:51:18.859 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: cEMI L-Data.req from 1.0.255 to 1.1.11, system priority hop count 6 repeat tpdu 81
2016-04-21 09:51:18.859 [DEBUG] [tuwien.auto.calimero :45 ] - KNXnet/IP Tunneling 192.168.0.10:3671: sending cEMI frame seq 170, wait for cEMI.con, attempt 1 (channel 38) 06 10 04 20 00 14 04 26 aa 00 11 00 b0 60 10 ff 11 0b 00 81
2016-04-21 09:51:18.884 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: indication from 1.1.11
2016-04-21 09:51:18.903 [DEBUG] [tuwien.auto.calimero :45 ] - KNXnet/IP Tunneling 192.168.0.10:3671: received cEMI L-Data.con with req 40
2016-04-21 09:51:18.904 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: confirmation of 1.1.11
2016-04-21 09:51:18.904 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: send to 1.1.11 succeeded
2016-04-21 09:51:18.904 [INFO ] [tuwien.auto.calimero :43 ] - calimero.link.192.168.0.10:3671: send message to 1.1.11, wait for confirmation
2016-04-21 09:51:18.904 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: cEMI L-Data.req from 1.0.255 to 1.1.11, system priority hop count 6 repeat tpdu 81
2016-04-21 09:51:18.905 [DEBUG] [tuwien.auto.calimero :45 ] - KNXnet/IP Tunneling 192.168.0.10:3671: sending cEMI frame seq 171, wait for cEMI.con, attempt 1 (channel 38) 06 10 04 20 00 14 04 26 ab 00 11 00 b0 60 10 ff 11 0b 00 81
2016-04-21 09:51:18.924 [DEBUG] [tuwien.auto.calimero :45 ] - KNXnet/IP Tunneling 192.168.0.10:3671: received cEMI L-Data.con with req 41
2016-04-21 09:51:18.925 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: confirmation of 1.1.11
2016-04-21 09:51:18.925 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: send to 1.1.11 succeeded
2016-04-21 09:51:18.925 [INFO ] [tuwien.auto.calimero :43 ] - calimero.link.192.168.0.10:3671: send message to 1.1.11, wait for confirmation
2016-04-21 09:51:18.925 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: cEMI L-Data.req from 1.0.255 to 1.1.11, system priority hop count 6 repeat tpdu 81
2016-04-21 09:51:18.925 [DEBUG] [tuwien.auto.calimero :45 ] - KNXnet/IP Tunneling 192.168.0.10:3671: sending cEMI frame seq 172, wait for cEMI.con, attempt 1 (channel 38) 06 10 04 20 00 14 04 26 ac 00 11 00 b0 60 10 ff 11 0b 00 81
2016-04-21 09:51:18.946 [DEBUG] [tuwien.auto.calimero :45 ] - KNXnet/IP Tunneling 192.168.0.10:3671: received cEMI L-Data.con with req 42
2016-04-21 09:51:18.946 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: confirmation of 1.1.11
2016-04-21 09:51:18.946 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: send to 1.1.11 succeeded
2016-04-21 09:51:18.946 [INFO ] [tuwien.auto.calimero :43 ] - calimero.link.192.168.0.10:3671: send message to 1.1.11, wait for confirmation
2016-04-21 09:51:18.946 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: cEMI L-Data.req from 1.0.255 to 1.1.11, system priority hop count 6 repeat tpdu 81
2016-04-21 09:51:18.946 [DEBUG] [tuwien.auto.calimero :45 ] - KNXnet/IP Tunneling 192.168.0.10:3671: sending cEMI frame seq 173, wait for cEMI.con, attempt 1 (channel 38) 06 10 04 20 00 14 04 26 ad 00 11 00 b0 60 10 ff 11 0b 00 81
2016-04-21 09:51:18.967 [DEBUG] [tuwien.auto.calimero :45 ] - KNXnet/IP Tunneling 192.168.0.10:3671: received cEMI L-Data.con with req 43
2016-04-21 09:51:18.967 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: confirmation of 1.1.11
2016-04-21 09:51:18.967 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: send to 1.1.11 succeeded
2016-04-21 09:51:18.968 [INFO ] [tuwien.auto.calimero :43 ] - calimero.link.192.168.0.10:3671: send message to 1.1.11, wait for confirmation
2016-04-21 09:51:18.968 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: cEMI L-Data.req from 1.0.255 to 1.1.11, system priority hop count 6 repeat tpdu 81
2016-04-21 09:51:18.968 [DEBUG] [tuwien.auto.calimero :45 ] - KNXnet/IP Tunneling 192.168.0.10:3671: sending cEMI frame seq 174, wait for cEMI.con, attempt 1 (channel 38) 06 10 04 20 00 14 04 26 ae 00 11 00 b0 60 10 ff 11 0b 00 81
2016-04-21 09:51:18.986 [DEBUG] [tuwien.auto.calimero :45 ] - KNXnet/IP Tunneling 192.168.0.10:3671: received cEMI L-Data.con with req 44
2016-04-21 09:51:18.987 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: confirmation of 1.1.11
2016-04-21 09:51:18.987 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: send to 1.1.11 succeeded
2016-04-21 09:51:18.987 [INFO ] [tuwien.auto.calimero :43 ] - calimero.link.192.168.0.10:3671: send message to 1.1.11, wait for confirmation
2016-04-21 09:51:18.987 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: cEMI L-Data.req from 1.0.255 to 1.1.11, system priority hop count 6 repeat tpdu 81
2016-04-21 09:51:18.987 [DEBUG] [tuwien.auto.calimero :45 ] - KNXnet/IP Tunneling 192.168.0.10:3671: sending cEMI frame seq 175, wait for cEMI.con, attempt 1 (channel 38) 06 10 04 20 00 14 04 26 af 00 11 00 b0 60 10 ff 11 0b 00 81
2016-04-21 09:51:19.006 [DEBUG] [tuwien.auto.calimero :45 ] - KNXnet/IP Tunneling 192.168.0.10:3671: received cEMI L-Data.con with req 45
2016-04-21 09:51:19.007 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: confirmation of 1.1.11
2016-04-21 09:51:19.007 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: send to 1.1.11 succeeded
2016-04-21 09:51:19.008 [INFO ] [tuwien.auto.calimero :43 ] - calimero.link.192.168.0.10:3671: send message to 1.1.11, wait for confirmation
2016-04-21 09:51:19.008 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: cEMI L-Data.req from 1.0.255 to 1.1.11, system priority hop count 6 repeat tpdu 81
2016-04-21 09:51:19.008 [DEBUG] [tuwien.auto.calimero :45 ] - KNXnet/IP Tunneling 192.168.0.10:3671: sending cEMI frame seq 176, wait for cEMI.con, attempt 1 (channel 38) 06 10 04 20 00 14 04 26 b0 00 11 00 b0 60 10 ff 11 0b 00 81
2016-04-21 09:51:19.026 [DEBUG] [tuwien.auto.calimero :45 ] - KNXnet/IP Tunneling 192.168.0.10:3671: received cEMI L-Data.con with req 46
2016-04-21 09:51:19.026 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: confirmation of 1.1.11
2016-04-21 09:51:19.027 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: send to 1.1.11 succeeded
2016-04-21 09:51:19.027 [DEBUG] [tuwien.auto.calimero :45 ] - TL 192.168.0.10:3671: send disconnect to 1.1.11
2016-04-21 09:51:19.027 [INFO ] [tuwien.auto.calimero :43 ] - calimero.link.192.168.0.10:3671: send message to 1.1.11, wait for confirmation
2016-04-21 09:51:19.027 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: cEMI L-Data.req from 1.0.255 to 1.1.11, system priority hop count 6 repeat tpdu 81
2016-04-21 09:51:19.027 [DEBUG] [tuwien.auto.calimero :45 ] - KNXnet/IP Tunneling 192.168.0.10:3671: sending cEMI frame seq 177, wait for cEMI.con, attempt 1 (channel 38) 06 10 04 20 00 14 04 26 b1 00 11 00 b0 60 10 ff 11 0b 00 81
2016-04-21 09:51:19.046 [DEBUG] [tuwien.auto.calimero :45 ] - KNXnet/IP Tunneling 192.168.0.10:3671: received cEMI L-Data.con with req 47
2016-04-21 09:51:19.046 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: confirmation of 1.1.11
2016-04-21 09:51:19.046 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: send to 1.1.11 succeeded
2016-04-21 09:51:19.046 [INFO ] [tuwien.auto.calimero :43 ] - calimero.link.192.168.0.10:3671: send message to 1.1.11
2016-04-21 09:51:19.046 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: cEMI L-Data.req from 1.0.255 to 1.1.11, system priority hop count 6 repeat tpdu c2
2016-04-21 09:51:19.046 [DEBUG] [tuwien.auto.calimero :45 ] - KNXnet/IP Tunneling 192.168.0.10:3671: sending cEMI frame seq 178, wait for ack, attempt 1 (channel 38) 06 10 04 20 00 14 04 26 b2 00 11 00 b0 60 10 ff 11 0b 00 c2
2016-04-21 09:51:19.049 [DEBUG] [tuwien.auto.calimero :45 ] - calimero.link.192.168.0.10:3671: send to 1.1.11 succeeded
2016-04-21 09:51:19.050 [DEBUG] [.k.h.KNXBridgeBaseThingHandler:1081 ] - Reading 2 bytes at memory location 16387 for 1.1.11 yields 2 bytes