calvincestari/ogre

zekk.works Ogre

zekk.works Ogre

It's been about 4 years since the group buy for this keyboard started and I figured it's time to put this design out there for people to play with at their leisure. The design has been obsolete for a long time but it can definitely be adapted to work as it was originally intended. I just don't care to do it.

Before going any further, please read this:

https://docs.google.com/document/d/1tTJ8NAZYUAlmuh_dlDB191bnrW_aPaK1XLcf3b7JURk/edit?usp=sharing

Note: The information about "Kijin" in the Final Thoughts section in the document linked above has not been updated since I wrote the document. No keyboard named Kijin is currently planned as of July 4 2024 (if my overall inactivity in designs hasn't otherwise been an indicator).

I'm releasing this with an MIT License. You are free to do what you want with this but I will not assist you in producing or troubleshooting the design.

Production Information

All information in this section should be validated using the design files in this repository.

Threading

	Size	Depth
Case (top/bottom)	M2	6 mm
Daughterboard	M2	1.5 mm

Fastening

	Size
Case (top/bottom)	M2 x 10mm
Daughterboard	M2 x 2mm / M2 x 3mm

O-ring

As long as Graveshift is around you can source an o-ring for the Ogre here:

https://graveshift.com/products/graveshift-s-o-rings

If they are not available from Graveshift you should be able to source them using this information:

	Size (Inches)	Size (Millimeters)
Inner Diameter (ID)	7.25	184
Outer Diameter (OD)	7.5	190
Cross Section (CS)	0.125	3