ch4se/openfreon

Open Source parts to replace broken or damaged pieces on your existing EON Dashcam DevKit from Comma.ai.

OpenFrEON 2.0

This project is for the purpose of creating a device similar to Comma.ai's EON DevKit.

If you don't already have an EON DevKit, you can buy one here: https://comma.ai/shop/products/eon-gold-dashcam-devkit

Note: These components are designed to fit the dimensions the One Plus 3T smartphone. Other devices will not be compatible.

Printable—Included Parts

• FrEON2.stl (All parts for standard FrEON 2.0)

• FrEON2EM.stl (All parts for FrEON 2.0 modded for 140mm heatsink

FrEON2-Components

• FrEON2-Left.stl

• FrEON2-Right.stl

• FrEON2-FanDuct.stl

• FrEON2-BottomClip.stl

FrEON2EM-Components (for 140mm heatsink)

• FrEON2-Left.stl

• FrEON2-Right.stl

• FrEON2-BottomClip.stl

Mounts

• includes FrEON mounts from 20-40 degrees in increments of 2 degrees.

Non-Printable Parts & Hardware

• 4 x M3x10mm Screws

• 4 x Heat Set Inserts

• 100x60x10mm Heatsink (The Heatsink included with the EON Dashcam Devkit is milled to accommodate the camera lens.)

• 40x10mm 5V Blower

• 3M GoPro Mount

Support

If you have any questions regarding development or issues with the current design, find me on Discord @Chase

Help fund this project and future projects by donating via paypal: https://paypal.me/chasehiggins/

Or support me on patreon: https://www.patreon.com/chasehiggins/

Support Comma.ai and myself by buying an EON using my affiliate link: https://comma.ai/shop/?ref=4

openfreon's Issues

Yes but can you print me this

🖕

Fan requiered with 140mm Heatsink?

Hello,
is the Fan requiered when using the 140mm heatsink?

Here's a 24 degree mount that actually fits

https://a360.co/2GzjRCf

The "knockoff" GoPro mounts (at least the ones linked in the repo) have different dimensions than the ones included. I got tired of dremeling and sanding. My printer is in fact, fine.

The dimensions (plus a 0.3mm tolerance for printability) in this modification is correct.

Cheers

Heatsink is out of stock

Here is a 4-pack of another heatsink that looks identical to the untrained eye.

https://www.amazon.com/100x60x10mm-Aluminum-Amplifier-Transistor-Semiconductor/dp/B07PJYDCMH

hi

Can you provide step format source files? I want to optimize the modification and adjustment on this basis?