cheadrian/termux-chroot-proot-wine-box86_64

Repo with instruction about how you can setup Proot / Chroot using Termux and GPU acceleration for Box86, Wine, etc.

termux-chroot-proot-wine-box86_64's Issues

Shortcuts were unable to install properly

The installation went ok, but after it I wan unable to launch everything with alias start_box_proot
It gave me an output that command was not found.

Wine 32 bit not working

I have a 64 bit android phone, it runs wine 64 fine but the wine 32 is not running, anything I can do to fix it?

Error while installing and can't retry due to my internet

Hello,
Thanks for your great work
Can you please tell me what to do while installation failed at zenity step stage 2 as in this log:

Running step: install_zenity - stage 2.                 You need zenity to run winetricks --gui desktop shortcuts, which is space consuming.                            Do you want to install zenity? (y/n)                    y                                                       Install zenity...                                       Reading package lists... Done
Building dependency tree... Done                        Reading state information... Done                       The following package was automatically installed and is no longer required:
  libpam-cap                                            Use 'apt autoremove' to remove it.                      The following additional packages will be installed:      aspell aspell-en bubblewrap dictionaries-common         emacsen-common enchant-2 gstreamer1.0-gl                gstreamer1.0-plugins-good gstreamer1.0-x                hunspell-en-us libaa1 libaspell15 libatomic1
  libavc1394-0 libcaca0 libdv4 libenchant-2-2             libgraphene-1.0-0 libgstreamer-gl1.0-0
  libgstreamer-plugins-good1.0-0 libharfbuzz-icu0         libhunspell-1.7-0 libhyphen0 libiec61883-0
  libjavascriptcoregtk-4.0-18 libmanette-0.2-0            libmp3lame0 libmpg123-0 libncurses6                     libpipewire-0.3-0 libpipewire-0.3-common                libpipewire-0.3-modules libprocps8 libraw1394-11        libshout3 libslang2 libspa-0.2-modules libspeex1        libtag1v5 libtag1v5-vanilla libtext-iconv-perl          libtwolame0 libv4l-0 libv4lconvert0 libvpx7             libwavpack1 libwebkit2gtk-4.0-37 libwebpdemux2          libwoff1 libwpe-1.0-1 libwpebackend-fdo-1.0-1           libxslt1.1 pipewire pipewire-bin
  pipewire-media-session procps xdg-dbus-proxy            xdg-desktop-portal xdg-desktop-portal-gtk               zenity-common                                         Suggested packages:                                       aspell-doc spellutils wordlist hunspell                 openoffice.org-hunspell | openoffice.org-core
  libdv-bin oss-compat libenchant-2-voikko                libraw1394-doc speex gstreamer1.0-libav                 gstreamer1.0-plugins-bad gstreamer1.0-alsa              accountsservice evince xdg-desktop-portal-gnome       The following NEW packages will be installed:             aspell aspell-en bubblewrap dictionaries-common         emacsen-common enchant-2 gstreamer1.0-gl                gstreamer1.0-plugins-good gstreamer1.0-x                hunspell-en-us libaa1 libaspell15 libatomic1
  libavc1394-0 libcaca0 libdv4 libenchant-2-2             libgraphene-1.0-0 libgstreamer-gl1.0-0                  libgstreamer-plugins-good1.0-0 libharfbuzz-icu0         libhunspell-1.7-0 libhyphen0 libiec61883-0
  libjavascriptcoregtk-4.0-18 libmanette-0.2-0            libmp3lame0 libmpg123-0 libncurses6                     libpipewire-0.3-0 libpipewire-0.3-common                libpipewire-0.3-modules libprocps8 libraw1394-11        libshout3 libslang2 libspa-0.2-modules libspeex1
  libtag1v5 libtag1v5-vanilla libtext-iconv-perl          libtwolame0 libv4l-0 libv4lconvert0 libvpx7
  libwavpack1 libwebkit2gtk-4.0-37 libwebpdemux2          libwoff1 libwpe-1.0-1 libwpebackend-fdo-1.0-1
  libxslt1.1 pipewire pipewire-bin                        pipewire-media-session procps xdg-dbus-proxy
  xdg-desktop-portal xdg-desktop-portal-gtk zenity        zenity-common
0 upgraded, 61 newly installed, 0 to remove and 1 not upgraded.
Need to get 38.1 MB of archives.                        After this operation, 132 MB of additional disk space will be used.                                             Get:1 http://ports.ubuntu.com/ubuntu-ports jammy-updates/main arm64 libncurses6 arm64 6.3-2ubuntu0.1 [108 kB]   Get:2 http://ports.ubuntu.com/ubuntu-ports jammy/main arm64 libprocps8 arm64 2:3.3.17-6ubuntu2 [35.0 kB]        Get:3 http://ports.ubuntu.com/ubuntu-ports jammy/main arm64 procps arm64 2:3.3.17-6ubuntu2 [382 kB]             Get:4 http://ports.ubuntu.com/ubuntu-ports jammy/main arm64 libslang2 arm64 2.3.2-5build4 [442 kB]              Get:5 http://ports.ubuntu.com/ubuntu-ports jammy/main arm64 libtext-iconv-perl arm64 1.7-7build3 [14.0 kB]      Get:6 http://ports.ubuntu.com/ubuntu-ports jammy/main arm64 libaspell15 arm64 0.60.8-4build1 [317 kB]           Get:7 http://ports.ubuntu.com/ubuntu-ports jammy/main arm64 emacsen-common all 3.0.4 [14.9 kB]                  Get:8 http://ports.ubuntu.com/ubuntu-ports jammy/main arm64 dictionaries-common all 1.28.14 [185 kB]            Get:9 http://ports.ubuntu.com/ubuntu-ports jammy/main arm64 aspell arm64 0.60.8-4build1 [85.8 kB]               Get:10 http://ports.ubuntu.com/ubuntu-ports jammy/main arm64 aspell-en all 2018.04.16-0-1 [299 kB]
Get:11 http://ports.ubuntu.com/ubuntu-ports jammy/main arm64 bubblewrap arm64 0.6.1-1 [45.5 kB]
Get:12 http://ports.ubuntu.com/ubuntu-ports jammy/main arm64 hunspell-en-us all 1:2020.12.07-2 [280 kB]
Get:13 http://ports.ubuntu.com/ubuntu-ports jammy/main arm64 libhunspell-1.7-0 arm64 1.7.0-4build1 [167 kB]     Get:14 http://ports.ubuntu.com/ubuntu-ports jammy/main arm64 libenchant-2-2 arm64 2.3.2-1ubuntu2 [50.9 kB]      Get:15 http://ports.ubuntu.com/ubuntu-ports jammy/main arm64 enchant-2 arm64 2.3.2-1ubuntu2 [12.5 kB]           Get:16 http://ports.ubuntu.com/ubuntu-ports jammy/main arm64 libgraphene-1.0-0 arm64 1.10.8-1 [46.4 kB]         Get:17 http://ports.ubuntu.com/ubuntu-ports jammy-updates/main arm64 libgstreamer-gl1.0-0 arm64 1.20.1-1ubuntu0.1 [192 kB]
Get:18 http://ports.ubuntu.com/ubuntu-ports jammy-updates/main arm64 gstreamer1.0-gl arm64 1.20.1-1ubuntu0.1 [117 kB]                                                   Get:19 http://ports.ubuntu.com/ubuntu-ports jammy/main arm64 libaa1 arm64 1.4p5-50build1 [51.2 kB]              Get:20 http://ports.ubuntu.com/ubuntu-ports jammy/main arm64 libraw1394-11 arm64 2.1.2-2build2 [27.2 kB]        Get:21 http://ports.ubuntu.com/ubuntu-ports jammy/main arm64 libavc1394-0 arm64 0.5.4-5build2 [16.6 kB]         Get:22 http://ports.ubuntu.com/ubuntu-ports jammy/main arm64 libcaca0 arm64 0.99.beta19-2.2ubuntu4 [221 kB]     Get:23 http://ports.ubuntu.com/ubuntu-ports jammy/main arm64 libdv4 arm64 1.0.0-14build1 [59.2 kB]              Get:24 http://ports.ubuntu.com/ubuntu-ports jammy-updates/main arm64 libgstreamer-plugins-good1.0-0 arm64 1.20.3-0ubuntu1.1 [28.7 kB]                                   Get:25 http://ports.ubuntu.com/ubuntu-ports jammy/main arm64 libiec61883-0 arm64 1.2.0-4build3 [24.9 kB]        Get:26 http://ports.ubuntu.com/ubuntu-ports jammy/main arm64 libmp3lame0 arm64 3.100-3build2 [142 kB]
Get:27 http://ports.ubuntu.com/ubuntu-ports jammy/main arm64 libmpg123-0 arm64 1.29.3-1build1 [170 kB]          Get:28 http://ports.ubuntu.com/ubuntu-ports jammy/main arm64 libspeex1 arm64 1.2~rc1.2-1.1ubuntu3 [52.6 kB]     Get:29 http://ports.ubuntu.com/ubuntu-ports jammy/main arm64 libshout3 arm64 2.4.5-1build3 [53.9 kB]
Get:30 http://ports.ubuntu.com/ubuntu-ports jammy/main arm64 libtag1v5-vanilla arm64 1.11.1+dfsg.1-3ubuntu3 [286 kB]                                                    Get:31 http://ports.ubuntu.com/ubuntu-ports jammy/main arm64 libtag1v5 arm64 1.11.1+dfsg.1-3ubuntu3 [11.5 kB]   Get:32 http://ports.ubuntu.com/ubuntu-ports jammy/main arm64 libtwolame0 arm64 0.4.0-2build2 [51.7 kB]          Get:33 http://ports.ubuntu.com/ubuntu-ports jammy/main arm64 libv4lconvert0 arm64 1.22.1-2build1 [82.1 kB]      Get:34 http://ports.ubuntu.com/ubuntu-ports jammy/main arm64 libv4l-0 arm64 1.22.1-2build1 [44.4 kB]            Get:35 http://ports.ubuntu.com/ubuntu-ports jammy/main arm64 libvpx7 arm64 1.11.0-2ubuntu2 [1041 kB]            Get:36 http://ports.ubuntu.com/ubuntu-ports jammy/main arm64 libwavpack1 arm64 5.4.0-1build2 [77.6 kB]          Get:37 http://ports.ubuntu.com/ubuntu-ports jammy-updates/main arm64 gstreamer1.0-plugins-good arm64 1.20.3-0ubuntu1.1 [1872 kB]                                        Get:38 http://ports.ubuntu.com/ubuntu-ports jammy-updates/main arm64 gstreamer1.0-x arm64 1.20.1-1ubuntu0.1 [81.4 kB]
Get:39 http://ports.ubuntu.com/ubuntu-ports jammy-updates/main arm64 libatomic1 arm64 12.3.0-1ubuntu1~22.04 [10.8 kB]                                                   Get:40 http://ports.ubuntu.com/ubuntu-ports jammy-updates/main arm64 libharfbuzz-icu0 arm64 2.7.4-1ubuntu3.1 [5824 B]                                                   Get:41 http://ports.ubuntu.com/ubuntu-ports jammy/main arm64 libhyphen0 arm64 2.8.8-7build2 [28.0 kB]           Get:42 http://ports.ubuntu.com/ubuntu-ports jammy-updates/main arm64 libjavascriptcoregtk-4.0-18 arm64 2.40.4-0ubuntu0.22.04.1 [7312 kB]
Ign:42 http://ports.ubuntu.com/ubuntu-ports jammy-updates/main arm64 libjavascriptcoregtk-4.0-18 arm64 2.40.4-0ubuntu0.22.04.1                                          Get:43 http://ports.ubuntu.com/ubuntu-ports jammy/main arm64 libmanette-0.2-0 arm64 0.2.6-3build1 [29.7 kB]
Get:44 http://ports.ubuntu.com/ubuntu-ports jammy-updates/main arm64 libspa-0.2-modules arm64 0.3.48-1ubuntu3 [500 kB]
Get:45 http://ports.ubuntu.com/ubuntu-ports jammy-updates/main arm64 libpipewire-0.3-0 arm64 0.3.48-1ubuntu3 [268 kB]                                                   Get:46 http://ports.ubuntu.com/ubuntu-ports jammy-updates/main arm64 libpipewire-0.3-common all 0.3.48-1ubuntu3 [3982 B]
Get:47 http://ports.ubuntu.com/ubuntu-ports jammy-updates/main arm64 libpipewire-0.3-modules arm64 0.3.48-1ubuntu3 [497 kB]                                             Get:48 http://ports.ubuntu.com/ubuntu-ports jammy/main arm64 xdg-dbus-proxy arm64 0.1.3-1 [24.1 kB]             Get:49 http://ports.ubuntu.com/ubuntu-ports jammy-updates/main arm64 libwebpdemux2 arm64 1.2.2-2ubuntu0.22.04.1 [9934 B]
Get:50 http://ports.ubuntu.com/ubuntu-ports jammy/main arm64 libwoff1 arm64 1.0.2-1build4 [43.7 kB]             Get:51 http://ports.ubuntu.com/ubuntu-ports jammy-updates/main arm64 libwpe-1.0-1 arm64 1.14.0-0ubuntu0.22.04.1 [21.0 kB]                                               Get:52 http://ports.ubuntu.com/ubuntu-ports jammy-updates/main arm64 libwpebackend-fdo-1.0-1 arm64 1.14.2-0ubuntu0.22.04.1 [34.2 kB]                                    Get:53 http://ports.ubuntu.com/ubuntu-ports jammy-updates/main arm64 libxslt1.1 arm64 1.1.34-4ubuntu0.22.04.1 [160 kB]                                                  Get:54 http://ports.ubuntu.com/ubuntu-ports jammy-updates/main arm64 libwebkit2gtk-4.0-37 arm64 2.40.4-0ubuntu0.22.04.1 [20.9 MB]
Ign:54 http://ports.ubuntu.com/ubuntu-ports jammy-updates/main arm64 libwebkit2gtk-4.0-37 arm64 2.40.4-0ubuntu0.22.04.1
Get:55 http://ports.ubuntu.com/ubuntu-ports jammy-updates/main arm64 pipewire-bin arm64 0.3.48-1ubuntu3 [296 kB]Get:56 http://ports.ubuntu.com/ubuntu-ports jammy-updates/main arm64 pipewire arm64 0.3.48-1ubuntu3 [3964 B]    Get:57 http://ports.ubuntu.com/ubuntu-ports jammy/main arm64 pipewire-media-session arm64 0.4.1-2ubuntu1 [123 kB]                                                       Get:58 http://ports.ubuntu.com/ubuntu-ports jammy-updates/main arm64 xdg-desktop-portal arm64 1.14.4-1ubuntu2~22.04.1 [256 kB]                                          Get:59 http://ports.ubuntu.com/ubuntu-ports jammy/main arm64 xdg-desktop-portal-gtk arm64 1.14.0-1build1 [85.2 kB]                                                      Get:60 http://ports.ubuntu.com/ubuntu-ports jammy-updates/main arm64 zenity-common all 3.42.1-0ubuntu1 [276 kB] Get:61 http://ports.ubuntu.com/ubuntu-ports jammy-updates/main arm64 zenity arm64 3.42.1-0ubuntu1 [65.0 kB]     Get:42 http://ports.ubuntu.com/ubuntu-ports jammy-updates/main arm64 libjavascriptcoregtk-4.0-18 arm64 2.40.4-0ubuntu0.22.04.1 [7312 kB]                                Ign:42 http://ports.ubuntu.com/ubuntu-ports jammy-updates/main arm64 libjavascriptcoregtk-4.0-18 arm64 2.40.4-0ubuntu0.22.04.1
Get:54 http://ports.ubuntu.com/ubuntu-ports jammy-updates/main arm64 libwebkit2gtk-4.0-37 arm64 2.40.4-0ubuntu0.22.04.1 [20.9 MB]                                       Ign:54 http://ports.ubuntu.com/ubuntu-ports jammy-updates/main arm64 libwebkit2gtk-4.0-37 arm64 2.40.4-0ubuntu0.22.04.1                                                 Get:42 http://ports.ubuntu.com/ubuntu-ports jammy-updates/main arm64 libjavascriptcoregtk-4.0-18 arm64 2.40.4-0ubuntu0.22.04.1 [7312 kB]                                Get:54 http://ports.ubuntu.com/ubuntu-ports jammy-updates/main arm64 libwebkit2gtk-4.0-37 arm64 2.40.4-0ubuntu0.22.04.1 [20.9 MB]
Ign:54 http://ports.ubuntu.com/ubuntu-ports jammy-updates/main arm64 libwebkit2gtk-4.0-37 arm64 2.40.4-0ubuntu0.22.04.1                                                 Get:54 http://ports.ubuntu.com/ubuntu-ports jammy-updates/main arm64 libwebkit2gtk-4.0-37 arm64 2.40.4-0ubuntu0.22.04.1 [20.9 MB]
Ign:54 http://ports.ubuntu.com/ubuntu-ports jammy-updates/main arm64 libwebkit2gtk-4.0-37 arm64 2.40.4-0ubuntu0.22.04.1                                                 Get:54 http://ports.ubuntu.com/ubuntu-ports jammy-updates/main arm64 libwebkit2gtk-4.0-37 arm64 2.40.4-0ubuntu0.22.04.1 [20.9 MB]                                       Err:54 http://ports.ubuntu.com/ubuntu-ports jammy-updates/main arm64 libwebkit2gtk-4.0-37 arm64 2.40.4-0ubuntu0.22.04.1                                                   Error reading from server - read (104: Connection reset by peer) [IP: 185.125.190.39 80]                      Fetched 10.4 MB in 6min 45s (25.7 kB/s)                 E: Failed to fetch http://ports.ubuntu.com/ubuntu-ports/pool/main/w/webkit2gtk/libwebkit2gtk-4.0-37_2.40.4-0ubuntu0.22.04.1_arm64.deb  Error reading from server - read (104: Connection reset by peer) [IP: 185.125.190.39 80]
E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?                           install_zenity - stage 2 - encountered an error.        setup_ubuntu_proot encountered an error.                Please use the 'cd termux-chroot-proot-wine-box86_64', './Scripts/Addons_Menu.sh' and select remove script or delete Termux App data and try again.                     Error can be from network, incompatibility, outdated 'X11_ARTIFACT_LINK' or script problem due Termux / Android updates.

This maybe happened because i was downloading from other apps and i have too much slow internet 2mbps

Add VNC support

How Do I connect the distro over VNC? what modifications should I make in LaunchXFCE_proot script so that it will start a VNC server instead of an Termux:X11 instance?

Also if VNC is not possible than how start only an SSH instance? running sshd and ssh root@<android_ip> gives connection refused.

Error

Running step: install_termux_x11_pkg_app.
Install Termux:X11 companion and apk.
Note: you can get the latest version from termux/termux-x11 Github.
--2023-10-29 16:14:57-- https://github.com/termux/termux-x11/releases/download/1.03.00/app-universal-debug.apk
Resolving github.com (github.com)... 20.207.73.82
Connecting to github.com (github.com)|20.207.73.82|:443... connected.
HTTP request sent, awaiting response... 404 Not Found
2023-10-29 16:14:57 ERROR 404: Not Found.

install_termux_x11_pkg_app encountered an error.
Please use the 'cd termux-chroot-proot-wine-box86_64', './Scripts/Addons_Menu.sh' and select remove script or delete Termux App data and try again.
Error can be from network, incompatibility, outdated 'X11_APK_LINK', 'X11_COMPANION_LINK' or script problem due Termux / Android updates.
~ $

how to install zink+turnip from proot-distro

Galaxy S23 Ultra, Galaxy Tab S8+ 5G
After installing Ubuntu 22.04 LTS through termux proot-distro

XFCE4 SESSION is in use via termux-x11 xwayland.

virglrenderer-android performance is too low and OpenGL2.1 limited, so I'm trying to accelerate GPU through zink+turnip.
I have two questions.

Q1. I'm curious about the 'meson build' options for A7xx zink+turnip support.
I'd like to know what the 'meson build' option is for A7xx zink+turnip support.

Q2. I'm curious about the command to run zink+turnip after build.
I want to know the command to execute zink+turnip after going through the Q1 process.

DISPLAY=:0 MESA_LOADER_DRIVER_OVERRIDE=zink TU_DEBUG=noconform MESA_VK_WSI_DEBUG=sw

Should I execute it as a command?

wineserver tmp/ "permission denied" error

Running step: create_wine86_wine64_prefix - stage 2. 
Create wine prefix for x86 and x64 version to -/.wine32 and -/.wine64. 
Box86 with Dynarec v0.3.3 6079f396 built on Aug 28 2023 06:17:57 
Box86 with Dynarec v0.3.3 6079f396 built on Aug 28 2023 06:17:57 
wine: created the configuration directory '/root/.wine32'
Box86 with Dynarec v0.3.3 6079f396 built on Aug 28 2023 06:17:57 
wineserver: lstat /tmp/.wine-0/server-fd06-dd848: Permission denied 
create wine86 wine64 prefix - stage 2 - encountered an error. 
setup ubuntu proot encountered an error.  

Then the installation can't proceed. I'm using LineageOS 18.1 with Magisk 26.1.

MESA: Panfrost - Mali-G52, Mali-G57

How can i setup and use for Mali-G52

i need tutorial

Cannot execute ./Scripts/Addons_Menu.sh

It says that there is no such file or directory

Chroot Launch and Kill Shortcut

for chroot setup, tried to update shortcut files multiple times but it doesn't seems to work. every time I'm getting same result.

termux-x11: no process found
Xwayland: no process found
pulseaudio: no process found
virgl_test_server_android: no process found

I know this log doesn't means anything as before launching it tries to kill existing ones but this is only message I get and terminal freezes. on the other hand I'm able to run commands manually and start desktop environment. shortcuts would be nice to have :')

LaunchXFCE_proot error

termux-x11: no process found
Xwayland: no process found
virgl_test_server: no process found
/data/data/com.termux/files/home/.shortcuts/LaunchXFCE_proot: 3: termux-toast: not found
how do I fix it?

Cannot install the script

--2023-07-13 18:06:58-- https://nightly.link/termux/termux-x11/actions/artifacts/616957082.zip
Resolving nightly.link (nightly.link)... 45.32.185.199, 2001:19f0:5001:3a1:5400:ff:fe59:31d1
Connecting to nightly.link (nightly.link)|45.32.185.199|:443... connected.
HTTP request sent, awaiting response... 404 Not Found
2023-07-13 18:06:59 ERROR 404: Not Found.

It gives me an error on this phase

TERMUX__USER_ID: parameter not set

OS:
Android 13

App:
Tested both with the newest termux & termux monet.
Tried removing and downloading the script a couple of times.

Script (error):
Install Termux:X11 APK. Open APP installer.
/data/data/com.termux/files/usr/bin/termux-open: 43: TERMUX__USER_ID: parameter not set
install_termux_x11_pkg_app encountered an error.
Please use the 'cd termux-chroot-proot-wine-box86_64', './Scripts/Addons_Menu.sh' and select remove script or delete Termux App data and try again.
Error can be from network, incompatibility, outdated 'X11_APK_LINK', 'X11_COMPANION_LINK' or script problem due Termux / Android updates.

Does this work on mali GPU?

I have smartphone with mtk6781 (Helio g96). Will it work?

LaunchXFCE_proot issue

This is related to Setup_Proot.md. Apparently, I am unable to open an internet browser inside Linux, is there any way to fix this?

I can't tun xfce4

`/usr/bin/startxfce4: X server already running on display :0
xrdb: Connection refused
xrdb: Can't open display ':0'
dbus-update-activation-environment: error: unable to connect to D-Bus: /usr/bin/dbus-launch terminated abnormally with the following error: Autolaunch error: X11 initialization failed.

xfce4-session: Cannot open display: .
Type 'xfce4-session --help' for usage.`

Also I want to connect with xrdp/vnc
can you help me

Black screen with termux x11 on chroot

Hi After following the tutorial, I have the following error and a black screen with the mouse as a cross:

dbus-launch --exit-with-session startxfce4 &
[1] 5179
root@linux:~# /usr/bin/startxfce4: X server already running on display :0
xrdb: Connection refused
xrdb: Can't open display ':0'
Unable to init server: Could not connect: Connection refused
xfce4-session: Cannot open display: .
Type 'xfce4-session --help' for usage.

neofetch
        -o          o-            u0_a173@linux
         +hydNNNNdyh+             -------------
       +mMMMMMMMMMMMMm+           OS: Android 10 aarch64
     `dMMm:NMMMMMMN:mMMd`         Host: Hisense HITV105C
     hMMMMMMMMMMMMMMMMMMh         Kernel: 4.14.133
 ..  yyyyyyyyyyyyyyyyyyyy  ..     Uptime: 6 hours, 5 mins
.mMMm`MMMMMMMMMMMMMMMMMMMM`mMMm.   Packages: 138 (dpkg), 1 (pkg)
:MMMM-MMMMMMMMMMMMMMMMMMMM-MMMM:   Shell: bash 5.2.15
:MMMM-MMMMMMMMMMMMMMMMMMMM-MMMM:   CPU: Unisoc ums512 (8) @ 1.820GHz
:MMMM-MMMMMMMMMMMMMMMMMMMM-MMMM:   Memory: 2030MiB / 4096MiB
:MMMM-MMMMMMMMMMMMMMMMMMMM-MMMM:
-MMMM-MMMMMMMMMMMMMMMMMMMM-MMMM-
+yy+ MMMMMMMMMMMMMMMMMMMM +yy+
     mMMMMMMMMMMMMMMMMMMm
     `/++MMMMh++hMMMM++/`
         MMMMo  oMMMM
         MMMMo  oMMMM
         oNMm-  -mMNs

Amyone has any idea how to troubleshoot?

Wine mono is not installed

How can I install Wine Mono? (this is the output of wine64 + application)

How to send key input?

How do I... Use the keyboard on the programs?

Why decrypted `/data` is required?

In Setup_Chroot_Magisk.md, Device /data - /userdata - is not encrypted; is required. However, it's hard to do this on some special devices. So, could you please tell me which step requires it? Thanks!

Bad URL for Ubuntu proot?

Path: $PREFIX/var/lib/proot-distro/installed-rootfs/ubuntu_box86/
[] Creating file '/data/data/com.termux/files/usr/etc/proot-distro/ubuntu_box86.override.sh'...
[] Installing Ubuntu...
[] Creating directory '/data/data/com.termux/files/usr/var/lib/proot-distro/installed-rootfs/ubuntu_box86'...
[] Creating directory '/data/data/com.termux/files/usr/var/lib/proot-distro/installed-rootfs/ubuntu_box86/.l2s'...
[] Downloading rootfs tarball...
[] URL: https://github.com/termux/proot-distro/releases/download/v3.5.1/ubuntu-aarch64-pd-v3.5.1.tar.xz

% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 9 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
curl: (22) The requested URL returned error: 404

[!] Download failure, please check your network connection.
[!] Exiting due to failure.

The Proot setup yields error code (1) /usr/bin/dpkg

So following the normal proot install i get the following error.

Errors were encountered while processing:
 keyboard-configuration                                                                                             xserver-xorg-core                                                                                                  xserver-xorg-video-ati
 xserver-xorg-video-radeon                                                                                          xserver-xorg-input-wacom
 xserver-xorg-video-fbdev
 xserver-xorg-video-all                                                                                             xserver-xorg-video-vesa
 xserver-xorg-video-amdgpu
 xserver-xorg                                                                                                       xserver-xorg-video-nouveau
 xserver-xorg-input-libinput
 xorg
 xserver-xorg-input-all
E: Sub-process /usr/bin/dpkg returned an error code (1)
update_install_base_packages - stage 2 - encountered an error.
setup_ubuntu_proot encountered an error.
Please use the 'cd termux-chroot-proot-wine-box86_64', './Scripts/Addons_Menu.sh' and select remove script or delete Termux App data and try again.                                                                                   Error can be from network, incompatibility, outdated 'X11_ARTIFACT_LINK', 'COMPANION_ARTIFACT_LINK' or script problem due Termux / Android updates.

Glxgears or any app won't run under virgl.

I installed mesa-link and VirGL through the add-ons
menu, then i launched the XFCE session with zink,
and attempted to run the glxgears app with GALLIUM_DRIVER=virpipe glxgears
and it gave me this:

I tried searching on Google for this error but got no results.
How can I solve this problem?