Go To Fine Calibration Position Button

[chris-annin]

Go To Fine Calibration Position Button

[Chris-Annin]

OK, I'll take a look.

…

On Sun, Mar 18, 2018 at 8:35 AM, jeffmaeder ***@***.***> wrote: The button on the new version 1.4 is not executing a move to position like in the 1.1 software. — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#11>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ATpgLSZt_VWrgSfS1ytz-4vSyaHKUOynks5tfn7IgaJpZM4SvPvI> .

[Chris-Annin]

I think I see the issue. im on it. I'll let you know when I have a fix.

[Chris-Annin]

posted updated files. I believe the bug is fixes as I havnt been able to recreate after. please confirm

[jeffmaeder]

The updated files still seem to have the bug. If I teach the fine calibration position , then jog any axis off the taught position, when I press the move to fine calibration position, nothing happens. This is the position that is stored when I use the teach calibration position button:

Move J [*] X) 628.08 Y) 0.001 Z) 169.769 W) -90.0 P) 90.0 R) -90.0 T) 201.5 Speed-25 Ad 0 As 100 Dd 0 Ds 100 $F

[Chris-Annin]

Ok I’ll look again I must be missing something obvious. Thank you for your help and pointing this out.

…

Sent from my iPhone

On Mar 20, 2018, at 6:40 PM, jeffmaeder ***@***.***> wrote: The updated files still seem to have the bug. If I teach the fine calibration position , then jog any axis off the taught position, when I press the move to fine calibration position, nothing happens. This is the position that is stored when I use the teach calibration position button: Move J [*] X) 628.08 Y) 0.001 Z) 169.769 W) -90.0 P) 90.0 R) -90.0 T) 201.5 Speed-25 Ad 0 As 100 Dd 0 Ds 100 $F — You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub, or mute the thread.