CAD Files for new Version

[chris-annin]

CAD Files for new Version

[Chris-Annin]

what files do you need? with the kickstarter trying to launch aluminum kits i havnt posted the step files. do you need solidworks files or step files?

…

On Sun, Mar 18, 2018 at 10:32 AM, Philipp Bauer ***@***.***> wrote: Hi, At first many thanks for your new version. Would you provide the CAD files for the new 3D printed version? We need them to built your robot within a school project at a german school for automation technologies. Thanks in advance. — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#12>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ATpgLQ-nuji49jp7CSngLGbPE_EUg5kuks5tfpovgaJpZM4SvSnD> .

[BauerPh]

solidworks assembly would be great!

[BauerPh]

And 2 another questions:

• The ATX connector is not required anymore? Because it is still listed in the BOM.
• What is the advantage of the chain option inatead a belt?

[Chris-Annin]

email me at [email protected] and I will try and get you the files you need.

[Chris-Annin]

I did switch from ATX to aviation plugs and separate wires as this makes it more practical to make cables of any length you need. I removed the ATX cable from the design - I just updated the wiring harness manual and removed it from the BOM -thanks for pointing that out.

The belt was stretching too much so I opted for the chain.

[soswow]

@Chris-Annin I am just curious why those CAD files are not part of a repo?