cjne/pythermiagenesis

A python library for Thermia Inverter/Mega heatpumps

pythermiagenesis

A python library for Thermia Diplomat Inverter/Mega heatpumps.

This library communicates with the device using Modbus TCP. Set BMC to Modbus TCP on your heat pump to enable communication through this library.

documentation

Thermia Modbus TCP documentation: https://www.tcmadmin.thermia.se/docroot/dokumentbank/Modbus%20protocol%20for%20Genesis%20platform%2010.pdf

notes

1. Be aware that some registers such for example "Compressor operating hours" will require a 32 bit read from two registers if the value is larger than 65535. This library does not handle this automatically, you will have to do this manually. This is explained in the manufacturer documentation.

pythermiagenesis's Issues

Problem with integration

Hello,

Has added the installation files to the configuration and changed settings in the heatpump.

When I then have to download the integration, I get problems when the port number and other info have to be filled in.

Port number is correct. what more information should be filled in? whatever I tested appears required. What am I doing wrong?