cnoviello/stm32-nucleof4

Projects and templates for the STM32Nucleo-F4 developing board

Eclipse project templates for STM32Nucleo-F4

This repository contains basic templates for the STM32Nucleo-F4 developing board from ST.

These projects are thought as companion examples to my blog posts where I describe in depth how to use them. However they can be a good starting point to start programming your Nucleo board.

Templates were generated in Eclipse using GNU ARM Eclipse by Liviu Ionescu. If you need to setup the whole Eclipse/GCC ARM tool-chain, you can follow this series made of three parts on my blog.

These templates are preconfigured to work with Nucleo-F401RE and Nucleo-F411RE boards. To select the proper board, you have to add NUCLEO_F401 or NUCLEO_F411 macro define to the project settings, as shown in the following picture.

stm32-nucleof4's Issues

BLUENRG_CONFIG not defined

Where should we #define BLUENRG_CONFIG, called from bluenrg_IFR.c ?

Probably in the symbols project section or in a (new) .h file to #include in bluenrg_IFR.c ...

For F411RE with IDB05A2 (my setup) maybe like this :

#define BLUENRG_CONFIG                  BLUENRG_32_MHZ