cucpo/slic3r-settings

Prusa3D specific settings for the Slic3r Prusa Edition

Slic3r-settings

This project contains the Slic3r profiles for the 3D printers produced by Prusa Research http://www.prusa3d.com/

• Slic3r settings MK2 - Settings for the Original Prusa i3 MK2
• Slic3r settings 175 - Settings for the Prusa i3 with a 1.75mm filament extruder
• Slic3r settings 3mm - Settings for the Prusa i3 with a 3mm filament extruder

To apply these settings, you have to copy the particular github folder (Slic3r settings MK2 / Slic3r settings 175 / Slic3r settings 3mm) into a local folder, where Slic3r will find it. The destination depends on your operating system:

• Windows: "C:\Users\your_user_name\AppData\Roaming\Slic3r" or "C:\Documents and Settings\your_user_name\Application Data\Slic3r"
• Mac: "~/Library/Application Support/Slic3r/"
• Unix / Linux: "~/.Slic3r/"

In case you installed the Prusa3D Windows drivers package, the Start menu is filled in with Slic3r shortcuts. These shortcuts are stored in "C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Prusa3D" and they point Slic3r to the particular settings folder using the --DataDir switch.

• "C:\Users\Public\Documents\Prusa3D\Slic3r settings MK2" for the MK2
• "C:\Users\Public\Documents\Prusa3D\Slic3r settings 175" for the legacy i3 with a 1.75mm extruder
• "C:\Users\Public\Documents\Prusa3D\Slic3r settings 3mm" for the legacy i3 with a 3mm filament extruder

Therefore if you installed the Windows drivers package from Prusa3D, you may as well extract the whole (Slic3r settings to "C:\Users\Public\Documents\Prusa3D".