d3ext / wef Goto Github PK
View Code? Open in Web Editor NEWWi-Fi Exploitation Framework
License: MIT License
Wi-Fi Exploitation Framework
License: MIT License
Hi
When using EvilTwin attack with kali linux, in the hostapad screen there is a claiming "arp:option requieres an argument --'i'
netcard is in monitor mode, there are no other warnings.
Attached you will find the result of iw dev
iw dev
phy#0
Interface wlan0
ifindex 3
wdev 0x1
addr XXXXXXXXXXXXXXXXX
type monitor
channel 10 (2457 MHz), width: 20 MHz (no HT), center1: 2457 MHz
txpower 20.00 dBm
multicast TXQ:
qsz-byt qsz-pkt flows drops marks overlmt hashcol tx-bytes tx-packets
0 0 1 0 0 0 0 176 2
At the moment of creating a fake Ap from the option 8 of the menu, it is created correctly, but the wifi network is not visible in the devices, I have tried with two wifi cards, the tplink Tl-WN722N and the Alfa AWUSS036NH and with none of them it works, it is important to emphasize that at no time of the process it shows me an error by console, simply at the moment of creating the fake ap the network does not appear in other devices.
Translated with www.DeepL.com/Translator (free version)
Hello,
I've been trying out your tool and while testing out Evil-Twin with the setting option 5, just AP, I've noticed that meanwhile an AP is created, my phone can't get the IP address of the fake AP while trying to log into it. My phone connects to the AP (successfully using the password) and stays in the "trying to get IP address" state and I can't see any connected devices in the terminal.
My configuration for testing is:
My PC that creates a evil-twin AP (e.g. named Starbucksss) and internet access on usb0
My phone with an AP (e.g. named Starbucks) and internet tethering via USB connected to my PC
Another phone that tries to log into the evil-twin AP (Starbucksss in this case)
Is something wrong with my configuration? I'm afraid I don't know any Spanish as well, so I can't type in your native language, sorry about that. :(
Thank you!
Hola,
el link ofrecido en el curso de WI-FI para descargarse las herramientas necesarias no funciona:
https://raw.githubusercontent.com/D3Ext/d3ext.github.io/gh-pages/wifi-install.sh
gracias.
Saludos , soy un poco nuevo en todo este mundillo .
Al intentar usar la herramienta especificamente la funcion de evil twin llega el momento de seleccionar la ruta de un HS previo.
Al señalar la ruta , la herramienta me responde que el archivo no existe.
He probado con diferentes HS y la respuesta es la misma .
Uso el mismo HS en otros aplicativos y si los aceptan.
Hola estimado, estoy teniendo un problema que no me pasaba antes ( hace un año masomenos cuando lo probe )
Al querer usar el evil twin con portal cautivo me pide que coloque el handshake, antes no me lo solicitaba.
Como se prosigue ?
gracias
al momento de crear un Evil Twin Attack
en el dispositivo de la victima dice "conectado pero sin intenet"
y no sale la notificacion del portal cautivo y aunque intente abrirlo desde el navegador no resulta
mi tarjeta de red si admite modo monitor
¿estoy haciendo algo mal?
¿tengo que tener una configuracion concreta para correrlo correctamente?
¿que hago para solucionarlo?
MUCHAS GRACIAS DE ANTICIPACION!
Hey guys,
I can't find any reference on how to run WEF in 5Ghz (even though the description mentions it's supported). Any idea where I should look?
Thanks
A change was made to the hcxdumptool which changed the output feature '-w' to '-o'. WEF is still using the '-w' for writing the output file and this results in the error
[*] Starting PMKID attack, press Ctrl + C to stop it...
hcxdumptool: invalid option -- 'w'
hcxdumptool 6.2.5 (C) 2021 by ZeroBeat
usage: hcxdumptool -h for help
at which point the tool hangs.
WEF version
wef v1.3 for linux (https://github.com/D3Ext/WEF)
System information:
Linux 6.5.0-17-generic #17~22.04.1-Ubuntu SMP PREEMPT_DYNAMIC Tue Jan 16 14:32:32 UTC 2 x86_64 x86_64 x86_64 GNU/Linux
Hello,
I couldn't install WEF, here the error:
**[WEF] Preparing the setup for working properly,
Setup.sh: line 46: cd: too many arguments
sed: can't read /opt/wef/.wef.config: No such file or directory
sed: can't read /opt/wef/.wef.config: No such file or directory
[+] Installing some dependencies..setup.sh: line 131: cd: too many arguments**
Could you help me, please?
Describe the bug
The wifi I'm testing on is 2.4 and 5 Gh combined. There is no effect after turning on the beacon flood attack. I checked the wlan0 information and it shows Frequency: 2.412 GHz. Is it a problem that the 5GHz antenna is not recognized?Does it not support 802.11ac protocol? But I looked at the network card and it showed 802.11 ac. I don't know where the problem is anymore.
Expected behavior
There is no confusion about the names of some APs, I suspect these are 5GHz ones.
WEF version
1.1
System information:
Tengo problemas instalando WEF.
Ejecuto las instrucciones pero no encuentro el instalador dentro de la carpeta, lo tengo en src
Cuando lo ejecuto me dice que no encuetra el repositorio, que intente ejecutarlo desde donde se ha clonado
gracias de antemano
] Starting Caffe-Latte attack...
timeout: invalid time interval ‘bash’
Try 'timeout --help' for more information.
Warning: This program is an suid-root program or is being run by the root
user.
The full text of the error or warning message cannot be safely formatted
in this environment. You may get a more descriptive message by running the
program as a non-root user or by removing the suid bit on the executable.
xterm: Xt error: Can't open display: %s
xterm: DISPLAY is not set
/usr/bin/wef: line 1280: kill: (14470) - No such process
[+] Caffe-Latte Attack completed
[] Captures stored in: /opt/wef/main/captures
I connect to the network using my phone, it gives an ip, but doesn't redirect me to the fake instagram page.
Hola
Cuando se ejecuta el Evil Twin Attack, con la opcion Rogue AP+ Captive Portal, obtengo el siguiente error en la terminal:
arp: option requires an argument --'i'
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.