This is official page of software support from Deaware.
- ESP8266 forum.
- ESP8266 Arduino
- VCC is 3.3V
- All gpio is 3.3V
- 10 bits ADC is 0 - 1V.
- VIN is 4.5V - 12V.
- Directly plug USB to Serial to DW.miniESP. (Only for 6 Pin USB to Serial Arduino Programmer)
- Wiring USB2Serial to DW.miniESP following this table. (Any USB to Serial)
USB to Serial | DW.miniESP |
---|---|
GND | GND |
VCC | VCC |
TXD | RXD |
RXD | TXD |