devilbox/devilbox.org

devilbox website: http://devilbox.org

devilbox.org's Issues

mysql cannot start (any version)

ERROR: for mysql Cannot create container for service mysql: invalid bind mount spec "a5e2a2a82da96e8f5fe795d7cb212128ce8c37e47f58dcdc195d48007121733e:etc/mysql/docker-default.d:rw": invalid volume specification: 'a5e2a2a82da96e8f5fe795d7cb212128ce8c37e47f58dcdc195d48007121733e:etc/mysql/docker-default.d:rw': invalid mount config for type "volume": invalid mount path: 'etc/mysql/docker-default.d' mount path must be absolute
I tested on two different Macs (Sierra and High Sierra) same error.
Installed latest version: yesterday.

Unable to run docker-compose on elementary os

I have downloaded the latest docker following steps from https://docs.docker.com/install/linux/docker-ce/ubuntu/#install-docker-ce-1 ( replacing $(lsb_release -cs) with xenial because it was causing error on elementary os )

I then installed latest docker-compose following instructions at https://github.com/docker/compose/releases ,

Then I cloned the devilbox repo and copied example file for .env, but I am unable to get it started, This is what I am getting on terminal.

abhinav@Abhinav-ele:~/Projcts/Podev/devilbox$ docker -v
Docker version 17.12.0-ce, build c97c6d6
abhinav@Abhinav-ele:~/Projcts/Podev/devilbox$ docker-compose -v
docker-compose version 1.8.0, build unknown
abhinav@Abhinav-ele:~/Projcts/Podev/devilbox$
abhinav@Abhinav-ele:~/Projcts/Podev/devilbox$ docker-compose up
ERROR: Version in "./docker-compose.yml" is unsupported. You might be seeing this error because you're using the wrong Compose file version. Either specify a version of "2" (or "2.0") and place your service definitions under the `services` key, or omit the `version` key and place your service definitions at the root of the file to use version 1.
For more on the Compose file format versions, see https://docs.docker.com/compose/compose-file/

What should I do?

Opensearch issue on magento dev-2.4-develop

I have added new images to the file docker-compose.override.yml below. And when containers were up I get an issue
in the image opensearchproject/opensearch:latest

Please see the attached screenshot with errors.

opensearch-node1:
image: opensearchproject/opensearch:latest
container_name: opensearch-node1
environment:
- cluster.name=opensearch-cluster
- node.name=opensearch-node1
- discovery.seed_hosts=opensearch-node1,opensearch-node2
- cluster.initial_cluster_manager_nodes=opensearch-node1,opensearch-node2
- bootstrap.memory_lock=true # along with the memlock settings below, disables swapping
- "OPENSEARCH_JAVA_OPTS=-Xms512m -Xmx512m" # minimum and maximum Java heap size, recommend setting both to 50% of system RAM
ulimits:
memlock:
soft: -1
hard: -1
nofile:
soft: 65536 # maximum number of open files for the OpenSearch user, set to at least 65536 on modern systems
hard: 65536
volumes:
- opensearch-data1:/usr/share/opensearch/data
ports:
- 9200:9200
- 9600:9600 # required for Performance Analyzer
networks:
- opensearch-net
opensearch-node2:
image: opensearchproject/opensearch:latest
container_name: opensearch-node2
environment:
- cluster.name=opensearch-cluster
- node.name=opensearch-node2
- discovery.seed_hosts=opensearch-node1,opensearch-node2
- cluster.initial_cluster_manager_nodes=opensearch-node1,opensearch-node2
- bootstrap.memory_lock=true
- "OPENSEARCH_JAVA_OPTS=-Xms512m -Xmx512m"
ulimits:
memlock:
soft: -1
hard: -1
nofile:
soft: 65536
hard: 65536
volumes:
- opensearch-data2:/usr/share/opensearch/data
networks:
- opensearch-net
opensearch-dashboards:
image: opensearchproject/opensearch-dashboards:latest
container_name: opensearch-dashboards
ports:
- 5601:5601
expose:
- "5601"
environment:
OPENSEARCH_HOSTS: '["https://opensearch-node1:9200","https://opensearch-node2:9200"]'
networks:
- opensearch-net

Who also has faced this issue?

https not working for devilbox.org

https://devilbox.org is not working properly.

According to the following, you may need to re-add the custom domain to initialize https or tweak some DNS records.

https://docs.github.com/en/github/working-with-github-pages/troubleshooting-custom-domains-and-github-pages#https-errors

Issue to remove

Sorry, commented on the wrong repo. Feel free to delete this issue.

How to uninstall/remove completely

Could you please write some documentation on how to uninstall/remove completely?

Permission denied

Distro, kernel , docker and docker compose version

$ uname -a
Linux robbinespu 4.16.12-300.fc28.x86_64 #1 SMP Fri May 25 21:13:28 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux

$ cat /etc/fedora-release 
Fedora release 28 (Twenty Eight)

$ docker -v
Docker version 1.13.1, build 1ab62f1-unsupported

$ docker-compose -v
docker-compose version 1.20.1, build 5d8c71b

The .env file

###
###  ---------------------------------------------------
###  D E V I L B O X   R U N - T I M E   S E T T I N G S
###  ---------------------------------------------------
###
###  All the following settings are applied during
###  $ docker-compose up
###
###  No need to rebuild any dockers!
###
###  For custom variables, scroll to the bottom
###


###
### Show all executed commands in each
### docker image during docker-compose up?
###
### 1: Yes
### 0: No
DEBUG_COMPOSE_ENTRYPOINT=1


###
### Log to file or Docker logs.
###
### Logging to file means log files are available under log/
### on your host operating system.
### Logging to Docker logs means log files are streamed to
### stdout and stderr.
###
### 1: Log to Docker logs
### 0: Log to file
###
DOCKER_LOGS=0


###
### Relative or absolute path to the devilbox repository.
### (Used as a prefix for all mount paths)
### There is no need to change this.
###
### The only exception is for OSX users wanting to use NFS
### mounts instead of Filesystem mounts due to degraded performance
### on OSX.
###
### Note: When changing this variable you must re-create the container.
###       Simply remove it, it will be auto-created during the next start:
###
### $ docker-compose rm -f
###
DEVILBOX_PATH=.


###
### At what IP address should the docker services listen
### on the Host computer?
###
### The specified default should be fine for Linux and OSX (127.0.0.1:).
### If you are on windows, you will probably have to change
### it to the IP address of the docker machine.
###
### a.) Leave blank, to listen on all interfaces (no trailing color ':')
###    LOCAL_LISTEN_ADDR=
### b.) If an IP is specified, note the trailing colon ':'
###    LOCAL_LISTEN_ADDR=127.0.0.1:
###
LOCAL_LISTEN_ADDR=


###
### This is the domain suffix your projects will be made available
### with mass-virtual-hosting.
### It is also required for the internal DNS server to be setup.
###
### Note: Only ALPHA ([a-zA-Z]+) characters are supported.
###
### Example:
###   TLD_SUFFIX=loc
### Makes your project available under xxxx.loc
###
### Example:
###   TLD_SUFFIX=local
### Makes your project available under xxxx.local
###
TLD_SUFFIX=loc


###
### Optional DNS configuration
### Allows you to add extra DNS records (above the wildcard entry)
### Useful if your host computer run other Docker services that you want to connect to or reach
### from within the Devilbox network by a custom hostname.
###
### Format:
### -------
### Resolve any custom defined hostname to an IP address (useable inside container and host os)
###     EXTRA_HOSTS=<hostname>=<ip>[,<hostname>=<ip>]
###
### Resolve any custom defined hostname to whatever IP address a CNAME resolves to
### (Useable inside the container and host OS).
### Note: CNAME must be resolvable by Google DNS
###     EXTRA_HOSTS=<hostname>=<CNAME>[,<hostname>=<CNAME>]
###
### Examples:
### ---------
### EXTRA_HOSTS=hostname.loc=1.2.3.4
### EXTRA_HOSTS=host.loc=1.2.3.4,host.example.org=3.4.5.6
EXTRA_HOSTS=


###
### Set your user id and group id
###
### This should be changed to the value of your local
### users uid and gid
###
### Type `id` on the terminal to find out your values
###
NEW_UID=1000
NEW_GID=1000


###
### Timezone for all dockers and service config files
###
TIMEZONE=Asia/Kuala_Lumpur 




################################################################################
###
### INTRANET SETTINGS
###
################################################################################

###
### TLD_SUFFIX domains are checked if they are set in the
### host computer /etc/hosts or available via attached DNS server.
### Timeout is done on vhosts.php (intranet) via ajax calls.
### In order to keep performance, set this to a low value.
### DNS checks might not succeed in time on slow machines.
### If DNS is valid, but timeout is expired, set this to a higher value.
###
### DNS_CHECK_TIMEOUT value is how many seconds to time out
### Default is to timeout after 1 second (DNS_CHECK_TIMEOUT=1)
###
DNS_CHECK_TIMEOUT=1


###
### Devilbox UI SSL Certificate generation
###
### When using SSL each certificate requires names for which it is responsible:
### Common Name as well as alternative names.
###
### Specify comma separated hostnames below by which you want to access the Devilbox.
### Those hostnames will be included in the SSL certificate for the Devilbox intranet.
### This has nothing to do for SSL certificates for projects, it is just for the intranet
### itself.
###
DEVILBOX_UI_SSL_CN=localhost,*.localhost,devilbox,*.devilbox


###
### Devilbox UI Password protection enable/disable (1/0)
###
### Set DEVILBOX_UI_PROTECT to 1 in order to password protect the
### intranet.
###
### Example:
###   DEVILBOX_UI_PROTECT=1
###   DEVILBOX_UI_PROTECT=0
###
DEVILBOX_UI_PROTECT=0


###
### Devilbox UI Password
###
### When DEVILBOX_UI_PROTECT=1, use the following password
### to log in. The password can always be changed.
### When changing the password, make sure to restart your
### PHP container.
###
### Example:
###   DEVILBOX_UI_PASSWORD=my-very-secure-password
###   DEVILBOX_UI_PASSWORD=Some pass with spaces
###
### The default username is 'devilbox'
###
DEVILBOX_UI_PASSWORD=password


###
### Enable the Devilbox Intranet?
###
### Example:
###   DEVILBOX_UI_ENABLE=1
###   DEVILBOX_UI_ENABLE=0
###
DEVILBOX_UI_ENABLE=1



################################################################################
###
### 1. Choose Images (Version)
###
################################################################################

###
### You can choose any combination of httpd, mysql, postgresql or php.
### Each of them are fully compatible between one another.
###


###
### 1.1 Choose PHP Server Image
###
#PHP_SERVER=5.3
#PHP_SERVER=5.4
#PHP_SERVER=5.5
#PHP_SERVER=5.6
#PHP_SERVER=7.0
#PHP_SERVER=7.1
PHP_SERVER=7.2
#PHP_SERVER=7.3


###
### 1.2 Choose HTTPD Server Image
###
#HTTPD_SERVER=apache-2.2
#HTTPD_SERVER=apache-2.4
HTTPD_SERVER=nginx-stable
#HTTPD_SERVER=nginx-mainline


###
### 1.3 Choose MySQL Server Image
###
#MYSQL_SERVER=mysql-5.5
#MYSQL_SERVER=mysql-5.6
#MYSQL_SERVER=mysql-5.7
#MYSQL_SERVER=mysql-8.0
#MYSQL_SERVER=mariadb-5.5
#MYSQL_SERVER=mariadb-10.0
MYSQL_SERVER=mariadb-10.1
#MYSQL_SERVER=mariadb-10.2
#MYSQL_SERVER=mariadb-10.3
#MYSQL_SERVER=percona-5.5
#MYSQL_SERVER=percona-5.6
#MYSQL_SERVER=percona-5.7


###
### 1.4 Choose PostgreSQL Server Image
###
#PGSQL_SERVER=9.1
#PGSQL_SERVER=9.2
#PGSQL_SERVER=9.3
#PGSQL_SERVER=9.4
#PGSQL_SERVER=9.5
PGSQL_SERVER=9.6
#PGSQL_SERVER=10.0
#PGSQL_SERVER=10.1
#PGSQL_SERVER=10.2
#PGSQL_SERVER=10.3


###
### 1.5 Choose Redis Server Image
###
#REDIS_SERVER=2.8
#REDIS_SERVER=3.0
#REDIS_SERVER=3.2
REDIS_SERVER=4.0


###
### 1.6 Choose Memcached Server Image
###
#MEMCD_SERVER=1.4.21
#MEMCD_SERVER=1.4.22
#MEMCD_SERVER=1.4.23
#MEMCD_SERVER=1.4.24
#MEMCD_SERVER=1.4.25
#MEMCD_SERVER=1.4.26
#MEMCD_SERVER=1.4.27
#MEMCD_SERVER=1.4.28
#MEMCD_SERVER=1.4.29
#MEMCD_SERVER=1.4.30
#MEMCD_SERVER=1.4.31
#MEMCD_SERVER=1.4.32
#MEMCD_SERVER=1.4.33
#MEMCD_SERVER=1.4.34
#MEMCD_SERVER=1.4.35
#MEMCD_SERVER=1.4.36
#MEMCD_SERVER=1.4.37
#MEMCD_SERVER=1.4.38
#MEMCD_SERVER=1.4.39
#MEMCD_SERVER=1.5.0
#MEMCD_SERVER=1.5.1
#MEMCD_SERVER=1.5.2
#MEMCD_SERVER=1.5.3
#MEMCD_SERVER=1.5.4
MEMCD_SERVER=1.5.5
#MEMCD_SERVER=latest


###
### 1.7 Choose Mongo Server Image
###
#MONGO_SERVER=2.8
#MONGO_SERVER=3.0
#MONGO_SERVER=3.2
#MONGO_SERVER=3.4
#MONGO_SERVER=3.5
#MONGO_SERVER=3.6
MONGO_SERVER=3.7



################################################################################
###
### 2. Host Mounts (Your computer)
###
################################################################################

###
### Local filesystem path to www projects.
###
### Note: When changing this variable you must re-create the container.
###       Simply remove it, it will be auto-created during the next start:
###
### $ docker-compose rm -f
###
HOST_PATH_HTTPD_DATADIR=./data/www


###
### Local filesystem path to mysql/mariadb datadir.
###
### This can be an existing mysql data directory or empty.
### If it already is a mysql data directory with content,
### it will be mounted into the docker and used.
###
### If this directory is empty, a new mysql database will be
### created.
###
### Note: Inside this path, a subdirectory with the mysql|mariadb
###       version will be created where the actual data resides.
###       This is to protect databases from being altered by
###       newer or older mysql|mariadb server versions.
###
### Note: When changing this variable you must re-create the container.
###       Simply remove it, it will be auto-created during the next start:
###
### $ docker-compose rm -f
###
HOST_PATH_MYSQL_DATADIR=./data/mysql


###
### Local filesystem path to postgresql datadir.
###
### This can be an existing postgresql data directory or empty.
### If it already is a postgresql data directory with content,
### it will be mounted into the docker and used.
###
### If this directory is empty, a new postgresql database will be
### created.
###
### Note: Inside this path, a subdirectory with the postgresql
###       version will be created where the actual data resides.
###       This is to protect databases from being altered by
###       newer or older postgres server versions.
###
### Note: When changing this variable you must re-create the container.
###       Simply remove it, it will be auto-created during the next start:
###
### $ docker-compose rm -f
###
HOST_PATH_PGSQL_DATADIR=./data/pgsql


###
### Local filesystem path to mongodb datadir.
###
### This can be an existing mongodb data directory or empty.
### If it already is a mongodb data directory with content,
### it will be mounted into the docker and used.
###
### If this directory is empty, a new mongodb database will be
### created.
###
### Note: When changing this variable you must re-create the container.
###       Simply remove it, it will be auto-created during the next start:
###
### $ docker-compose rm -f
###
HOST_PATH_MONGO_DATADIR=./data/mongo



################################################################################
###
### 3. PHP Docker Settings
###
################################################################################

###
### Enable certain PHP modules which are not enabled by default
###
### Currently the only module that can be enabled is 'ioncube'
###
### PHP_MODULES_ENABLE=ioncube
###
PHP_MODULES_ENABLE=


###
### Disable any PHP modules that you don't require
###
### Specify a comma separated list without spaces of modules to disable
###
### PHP_MODULES_DISABLE=xdebug,imagick,swoole
###
PHP_MODULES_DISABLE=


###
### Configure everything else about PHP in
### * cfg/php-ini-X.X/*.ini
### * cfg/php-fpm-X.X/*.conf



################################################################################
###
### 4. HTTPD Docker Settings
###
################################################################################

###
### Expose HTTPD Port to Host
###
HOST_PORT_HTTPD=80
HOST_PORT_HTTPD_SSL=443


###
### Document Root Subdirectory
###
### In your project directory, which subfolder should
### serve your files?
###
### When changing this value, restart the devilbox.
###
HTTPD_DOCROOT_DIR=htdocs


###
### Per vHost Config Subdirectory
###
### In your project directory, which subfolder should
### hold apache, nginx templates for a customized vhost?
###
### When changing this value, restart the devilbox.
###
HTTPD_TEMPLATE_DIR=.devilbox



################################################################################
###
### 5. MySQL Docker Settings
###
################################################################################

###
### MySQL root user password
###
### If $HOST_PATH_MYSQL_DATADIR already contains an existing
### mysql datadir, enter the password for the existing mysql database
###
### If $HOST_PATH_MYSQL_DATADIR is empty, choose a new password that
### will be applied
###
MYSQL_ROOT_PASSWORD=


###
### Custom MySQL Runtime Settings
###
MYSQL_GENERAL_LOG=0


###
### Expose MySQL Port to Host
###
HOST_PORT_MYSQL=3306



################################################################################
###
### 6. PostgreSQL Docker Settings
###
################################################################################

###
### PostgreSQL 'root' user name (usually postgres)
###
PGSQL_ROOT_USER=postgres


###
### PostgreSQL 'root' user password
###
PGSQL_ROOT_PASSWORD=


###
### Expose PostgreSQL Port to Host
###
HOST_PORT_PGSQL=5432



################################################################################
###
### 7. Redis Docker Settings
###
################################################################################

###
### Expose Redis Port to Host
###
HOST_PORT_REDIS=6379



################################################################################
###
### 8. Memcached Docker Settings
###
################################################################################

###
### Expose Memcached Port to Host
###
HOST_PORT_MEMCD=11211



################################################################################
###
### 9. MongoDB Docker Settings
###
################################################################################

###
### Expose MongoDB Port to Host
###
HOST_PORT_MONGO=27017



################################################################################
###
### 10. Bind Docker Settings
###
################################################################################

###
### Expose Bind Port to Host
###
HOST_PORT_BIND=1053

###
### Add comma separated DNS server from which you want to receive DNS
### You can also add DNS servers from your LAN (if any are available)
###
BIND_DNS_RESOLVER=8.8.8.8,8.8.4.4

###
### Validate DNSSEC
###
### Values:
###  no:    DNSSEC validation is disabled
###  yes:   DNSSEC validation is enabled, but a trust anchor must be manually configured.
###  auto:  DNSSEC validation is enabled, and a default trust anchor for root zone is used.
###
BIND_DNSSEC_VALIDATE=no


###
### Bind timing options (time in seconds)
###
### Leave empty for defaults.
### Only change when you know what you are doing.
###
BIND_TTL_TIME=
BIND_REFRESH_TIME=
BIND_RETRY_TIME=
BIND_EXPIRY_TIME=
BIND_MAX_CACHE_TIME=


###
### Show DNS Queries in Docker logs output?
###
### 1: Yes
### 0: No
BIND_LOG_DNS_QUERIES=0



################################################################################
###
### 11. Custom variables
###
################################################################################

###
### Any variable defined in this file will be available
### as environment variables to your PHP/HHV Docker container.
###
### This might be useful to set application environment and retrieve
### them via: <?php getenv('MY_APPLICATION_ENV'); ?>
###


###
### Example:
### <?php echo getenv('Foo'); ?> would produce: 'some value'
###
#Foo=some value

I getting problem with permission from you devilbox docker

• chown: cannot read directory '/data/db': Permission denied
• chown: cannot read directory '/var/lib/postgresql/data/pgdata
• touch: cannot touch '/var/log/php/php-fpm.access': Permission denied
• genrsa: Can't open "/ca/devilbox-ca.key" for writing, Permission denie
• touch: cannot touch '/var/log/mysql/query.log': Permission denied

AutoDNS fails on windows

As default DNS points to 172.16.238.1 but the windows server dont have access to the network between the docker containers i have change it to 127.0.0.1 in the composer yaml file, but its still dont work

domain.loc. 3600 IN A 172.16.238.1.