digitalone1/easyeffects-presets

Presets for EasyEffects and PulseEffects.

easyeffects-presets's Issues

Audio popping due to compressor upward

I disabled each effect and only with upward compressor do I get a pop sound when initiating audio. Is there any way to prevent this? This does not occur with auto gain, but as you stated, its not ideal.

Not an issue / for advice

Hi thank you for your settings?

I appreciate a bit of crystallizer and extra-stereo (0.25 in output) .

In what position do you recommend placing them in your settings ?

I added these effects without moving them. They are located between the equalizer and the limiter.

Thanks for your advice.

Doesnt work on 6.2.4

Preset doesnt work with pipewire and easyeffect 6.2.4. Opening preset doesnt do anything - no plugin shows.

audio distortion due to gate and system upgrade

i just upgraded Manjaro (stable, 6.0.8-1 kernel) and noticed significant distortion in audio played with Firefox (youtube, etc.) and uncontrollable volume that jumps instantly from very quiet to very loud in local files played with Audacious when ever i try to adjust the volume

i narrowed down the problem to the gate component, but ultimately something that got upgraded seems to be the root problem - in every case, disabling the gate resolves the issue

here's the relevant changes i was able to find...

upgraded pipewire-zeroconf (1:0.3.59-2 -> 1:0.3.59-5)
upgraded pipewire-pulse (1:0.3.59-2 -> 1:0.3.59-5)
upgraded pipewire-alsa (1:0.3.59-2 -> 1:0.3.59-5)
upgraded kpipewire (5.26.2-1 -> 5.26.3-1)
upgraded gst-plugin-pipewire (1:0.3.59-2 -> 1:0.3.59-5)
upgraded pipewire-jack (1:0.3.59-2 -> 1:0.3.59-5)
upgraded pipewire-audio (1:0.3.59-2 -> 1:0.3.59-5)
upgraded pipewire (1:0.3.59-2 -> 1:0.3.59-5)
upgraded easyeffects (6.3.0-1 -> 7.0.0-1)

Applying LoudnessEQ on input

Hello,

A while ago, I (unsuccessfully) tried modifying this plugin to apply on mic input.
When & if you have time, could you please create a version of this plugin that can be applied on input stream(s), via EasyEffects?

In theory, this should help normalize audio levels if the mic is too far/close.

Also desn'a work for me

I have flatpak version of easyeffects for pipewire and I've put your script "LoudnessEqualizer.json" inside "/.var/app/com.github.wwmm.easyeffects/config/easyeffects/output" but it's not working.

Also your instructions are not really clear. Do we need to add effects manually inside easyeffects, and what effects and in what order?

I have latest flatpak version 6.2.5, and PipeWire 0.3.51

Calf JACK host

Can you provide preset file for Calf Jack Host (Calf Plugin Pack for Jack) ?
I'm using Jack but can't use Carla (compile issues)

Edit: Never mind, I've managed to compile Carla and open preset.
But still, it would be nice if you can provide preset for Calf as well.

Audio clipping when using Crossfeed + LoudnessEqualizer

I'm using easyeffects 6.2.8 with Jmeier Crossfeed where recommended (https://github.com/Digitalone1/EasyEffects-Presets#using-headphones) between Equalizer and Limiter and I've noticed notification sounds like https://github.com/signalapp/Signal-Desktop/blob/main/sounds/notification.ogg produce some really bad clipping/popping when played with no other sounds playing (or even with).
When I turn off Crossfeed or move it before Gate things seem to sound fine though.

To reproduce I've attached my preset (just the default LoudnessEqualizer preset with Crossfeed added where recommended) LoudnessEqualizer.json.txt and you can just play notfication.ogg a few times with headphones and Crossfeed off/on to compare.

Is moving before Gate the correct solution? Or does the extra dB that Crossfeed adds make everything before it need to be changed or something?

Installation instructions for FlatPak

I've placed the JSON in ~/.config/PulseEffects/output/ but it doesn't appear in PulseEffects. I've restarted my machine.

I'm running PulseEffects 4.8.2 on Pop OS 20.10. It didn't have a ~/.config/PulseEffects/ directory, so I created one, but the preset never appeared. I think this is because I've installed it as a FlatPak.

So, I placed it in ~/.var/app/com.github.wwmm.pulseeffects/config/PulseEffects/output/ restarted it, and it worked.

I'll drop in a PR to update the README.

issue with LoudnessEqualizer.json

Manjaro
easyeffects 6.2.6-1 (official repo)
pipewire 1:0.3.52-2 (official repo)
wireplumber 0.4.10-3 (official repo)

a few weeks ago after an update something changed with the sound system - i'm seeing 2 problems:

1. regardless of the source or decoder there is often a delay of a few seconds when playing a video (web, local), music, system sounds, etc. - sometimes there is no sound at all from the source and instead there is a buzz in the right channel - this has nothing to do with easyeffects but i thought i'd mention it

2. while the LoudnessEqualizer.json preset seems to work (bypassing some of the effects produces a noticeable difference), it also seems to be less effective than it was before (all defaults) - given my lack of knowledge and the complexity of 5 effects used to create the preset, i don't know what to adjust or how the effects interact with each other

JSON format error?

Hello, I try to import the preset and get the following:

"PRESET NOT LOADED CORRECTLY"
"Wrong Format in Effects List"

Running EasyEffects 7.1.4

Big thanks in advance. All the presets I find with Google suffering from this problem.

Error: Preset not loaded correctly

Hi there, when i try to load LoudnessEqualizer I get the error "preset not loaded correctly" "wrong format in effects list"

-I am using EasyEffects flatpak version (6.3.0)
-I put the file in the right folder as per instructions, preset appears in list etc, error appears when clicking load
-Pop_OS
-i can make basic effects and save as my own preset

not sure what Im doing wrong, please help :)

LoudnessEqualizer.json for macOS

Hello,

A thousand thanks to you for sharing this.
After having used this for a while, I can say with certainty that I now prefer Linux just because the madness of loudness is properly tamed only with your preset.
Loudness Equalization on Windows is increasingly gone/unavailable.
SoundSource from RogueAmoeba isn't cutting it for me.

Is there a way to faithfully reproduce this in macOS with SoundSource and Apple's default Audio Units?
If not, with good & cost-effective AUs, without spending too much time on the setup itself?

Thanks again!