diva/diva-distribution

OpenSim + addons. This is the content that gets distributed in the d2 project.

diva-distribution's Issues

Unable to make other user superuser (DIVA 7.1.1 / SuSe 11.4 / Mono 2.10)

Hallo I have been trying to give another user superuser permissions on my opensim installation (newest available Diva-Dist). After reading through different docs on the web I set her Level to 300 (according to the docs it should be > 200). Whenever she tries to request admin-status (tried in different current viewers). The request is denied! I compared the user entry with my own and have not been able to find any differences.

Please advise.

Regards,

SilverDay

avatar profiles not editable

in my (last) version of the D2, avatars cannot modify their profiles. i have no idea where to begin to look for how to fix this...since i'm using my grid as an extension of my novel, it is important to me to give the avatars proper identities...would be grateful for a hint!

UserAccounts.ServiceURLs column blank

The robust db table.column of UserAccounts.ServiceURLs seems to be used to temporarily store a new user password and other things before the user is approved and created. At some point later, after the user is created, the column is then set to a NULL value. The OpenSim default for this column is "HomeURI= InventoryServerURI= AssetServerURI=". Please set the Diva Distribution to also use the default for this column when a new user is created such as with Wifi.

Need to reconfigure Wifi interface

I configured Diva d2 binary for 0.7.02 installed and configured. However, I had to restore the database prior to the diva install. I need to rerun the configuration but I can't find any where to trigger a reconfigure, and way to cause the sql update to rerun.

Can this be done.

imprudence crashes on MacOS 10.6.3 (snow leopard)

the standard link to the OSX download on the Wifi pages leads to a .dmg file that crashes on my mac book pro. not so for the other viewers hippo and meerkat that i know of:

hippo 4 windoze - direct download from http://bit.ly/cqFwND
hippo 4 mac - direct download from http://bit.ly/aA8muI
meerkat 4 windoze/mac/linux - list at http://code.google.com/p/meerkat-viewer/downloads/list

Physic's Issue with the diva-distribution

Even though ODE is enabled, it seems I am unable to stand on all prims. Users fall through them. I am not sure if this is the appropriate area to report this but if you could look into it would be appreciated. Thanks

Stats on splash page all 0

On the splash page, all the stats across the bottom are listed as 0. I'm running in grid mode. as of the moment of this posting I have 1 user in world, 8 regions, 2 users, and 2 active in the last 30 days that aren't being reported.

Wifi does not enable on Ubuntu 10.04 LTS

Results of 'cat /dump.log | grep "Wifi"':
root@li103-118:/diva-r13458/bin# cat ~/dump.log | grep "Wifi"
16:27:55 - [REGIONMODULES]: Found shared region module Diva.Wifi.WifiModule, class Diva.Wifi.WifiModule
16:27:57 - [Wifi Module]: Initializing...
16:27:57 - [Wifi Module]: Could not load configuration. Wifi will be disabled.
16:28:01 - [REGIONMODULE]: Adding scene MetaGridNet 1 to shared module Wifi Service
16:28:03 - [REGIONMODULE]: Adding scene MetaGridNet 2 to shared module Wifi Service
16:28:03 - [REGIONMODULE]: Adding scene MetaGridNet 3 to shared module Wifi Service
16:28:04 - [REGIONMODULE]: Adding scene MetaGridNet 4 to shared module Wifi Service

Everythng else runs normally, and I followed all the instructions correctly in setting it up. When going to http://metagridnet:9000/wifi, I get this page:
Ooops!

The page you requested has been obsconded with by knomes. Find hippos quick!

If you are trying to log-in, your link parameters should have: "-loginpage http:///?method=login -loginuri http:///" in your link

Inventory Male, Female and Neutral Avatar

Hi, please help me:

I have opensim 0711 from web page in windows server 2008, i upload a lot inventory, i create new users with wifi and all normal, but for energy suply server restart, i run service and now new user havent all inventory created in Male Avatar, Female Avatar and Neutral Avatar.

Please help me again

Tnks

email address issue

I have run into two different instances where WiFi doesn't seem to be handling email correctly. Any help would be greatly appreciated.

When a new user creates an account and it is held as pending I am getting the following error in the Robust Console

  [Wifi]: Exception on sending email to (my admin email): The specified string is not in the form required for an email address.

I get a similar error when trying to use the password reset function.

 [Forgot Password Post Handler]: Exception System.FormatException: The specified string is not in the form required for an email address.

Thank you for any assistance and all the work you did to create WiFi. This is a great add on to our grid.

Andy

Wifi User Management module missing! help!

The first error i get is " [DivaData]: Invalid cast for GridUser store. Diva.Data required for methor .ctor.

If someone can help on that perfect but now to the real problem

wifi service is set to load the file Diva.GridUserManagement.dll which does not exist and as you might think it makes the web interface fail i can't accept users or manage any accounts

Please help!

Console.js does not show the output from commands

I've noticed that there's an issue with console.js where it doesn't read the new way opensim handles the responses

Wifi Admin user recreated on update

When running the update.exe and updating to a new version, the database will include a copy of the admin user even though it is allready there. I still have the wifi admin user in my ini, maybe there needs to be a check for an existing user (or a hint that this setting should be removed from the ini afterwards)

unable to update r12751

Diva,

Per your direction, I am posting my problem here.

I have been running Diva Distribution (up to r12751) in conjunction with a software program call USBWebserver http://www.usbwebserver.net/en/. It allows me to run a Web Server on a USB flash drive, which affords me portability of running my 4 regions on various computers. Up to now (before r13458), I have not encountered any problems running Diva Distribution and updating as new versions were available.

Here is the routine I have follow to upgrade my old Diva Distribution.

I start the USBWebserver program. In the server is my database for the opensim.
It’s User ID is “root”. I have not found a way to change the User ID in the USB Webserver so it will read “opensim”.

To upgrade my old Diva Distribution, I ran the USBWebserver first. Then I ran the Update.exe. I then went to the new file for r13458 and ran the Configure.exe. Answered all the questions and ran the 32Bitlauncher to start the new Diva Distribution.

The command screen came on and ran for a few moments and then just terminated. The log for what it ran was this:

2010-08-09 18:58:07,207 INFO - OpenSim.Application [OPENSIM MAIN]: configured log4net using default OpenSim.exe.config
2010-08-09 18:58:07,223 INFO - OpenSim.Application [OPENSIM MAIN]: Runtime gave us 500 worker threads and 1000 IOCP threads
2010-08-09 18:58:07,223 INFO - OpenSim.Application Performing compatibility checks...

2010-08-09 18:58:07,239 INFO - OpenSim.Application Environment is compatible.

2010-08-09 18:58:07,270 INFO - OpenSim.ConfigurationLoader [CONFIG]: Reading configuration settings
2010-08-09 18:58:07,270 INFO - OpenSim.ConfigurationLoader [CONFIG]: Reading configuration file E:\diva-r13553\bin\OpenSim.ini
2010-08-09 18:58:07,317 INFO - OpenSim.ConfigurationLoader [CONFIG]: Reading configuration file E:\diva-r13553\bin\config-include\DivaPreferences.ini
2010-08-09 18:58:07,348 INFO - OpenSim.ConfigurationLoader [CONFIG]: Reading configuration file E:\diva-r13553\bin\config-include\MyWorld.ini
2010-08-09 18:58:07,379 INFO - OpenSim.OpenSim [LOGGING]: Logging started to file E:\diva-r13553\bin\OpenSim.32BitLaunch.log
2010-08-09 18:58:07,395 INFO - OpenSim.OpenSim [OPENSIM MAIN]: Using async_call_method UnsafeQueueUserWorkItem
2010-08-09 18:58:07,395 INFO - OpenSim.Framework.Servers.BaseOpenSimServer [STARTUP]: Beginning startup processing
2010-08-09 18:58:07,395 INFO - OpenSim.Framework.Servers.BaseOpenSimServer [STARTUP]: OpenSimulator version: OpenSim 0.7.0.1 (Release)

2010-08-09 18:58:07,395 INFO - OpenSim.Framework.Servers.BaseOpenSimServer [STARTUP]: Operating system version: Microsoft Windows NT 6.1.7600.0

2010-08-09 18:58:07,410 INFO - OpenSim.OpenSim ====================================================================
2010-08-09 18:58:07,410 INFO - OpenSim.OpenSim ========================= STARTING OPENSIM =========================
2010-08-09 18:58:07,410 INFO - OpenSim.OpenSim ====================================================================
2010-08-09 18:58:07,410 INFO - OpenSim.OpenSim [OPENSIM MAIN]: Running
2010-08-09 18:58:07,441 INFO - OpenSim.Region.Framework.StorageManager [DATASTORE]: Attempting to load OpenSim.Data.MySQL.dll
2010-08-09 18:58:07,504 INFO - OpenSim.Data.MySQL.MySQLEstateStore [REGION DB]: MySql - connecting: Data Source=localhost;Database=opensim;User ID=opensim;Password=***;

In an effort to try to figure out a way to run the program, I then went into the MyWorld.ini file and tried substituting “root” for the User ID instead of “opensim”. When I ran the launcher again, it seemed to be run, but a new red lines (not seen in the older version) came up. The command screen ran much shorter as well.

The following is a part of the error lines which ran:

OpenSim.Services.AssetService.AssetService [ASSET]: Loading default asset set from assets/AssetSets.xml
2010-08-09 20:35:08,833 ERROR - OpenSim.Data.MySQL.MySQLAssetData [ASSET DB]: MySQL failure creating asset 8ceccb12-5aee-3584-e4a5-66973a844296 with name "place_marker". Error: Unknown column 'asset_flags' in 'field list'
2010-08-09 20:35:08,838 ERROR - OpenSim.Data.MySQL.MySQLAssetData [ASSET DB]: MySQL failure creating asset 01645eeb-8c51-60dc-58cc-b9512f05afc0 with name "tpose2". Error: Unknown column 'asset_flags' in 'field list'
2010-08-09 20:35:08,844 ERROR - OpenSim.Data.MySQL.MySQLAssetData [ASSET DB]: MySQL failure creating asset 53339f20-1811-f774-0768-0989f5e57df2 with name "bouncy_ball_left". Error: Unknown column 'asset_flags' in 'field list'
2010-08-09 20:35:08,848 ERROR - OpenSim.Data.MySQL.MySQLAssetData [ASSET DB]: MySQL failure creating asset 9e06424c-0178-82eb-ff21-6c0e4e5a7e6d with name "tpose". Error: Unknown column 'asset_flags' in 'field list'
2010-08-09 20:35:08,853 ERROR - OpenSim.Data.MySQL.MySQLAssetData [ASSET DB]: MySQL failure creating asset b22af34d-740a-286f-f20a-e0818d91735e with name "give_and_handshake". Error: Unknown column 'asset_flags' in 'field list'
2010-08-09 20:35:08,857 ERROR - OpenSim.Data.MySQL.MySQLAssetData [ASSET DB]: MySQL failure creating asset be7b9b16-5c88-2862-2d20-ec4b939d6a8e with name "bouncy_ball_walk". Error: Unknown column 'asset_flags' in 'field list'
2010-08-09 20:35:08,862 ERROR - OpenSim.Data.MySQL.MySQLAssetData [ASSET DB]: MySQL failure creating asset 9f2e3814-fc16-0b90-eeb8-5cf8a37fa3bd with name "bouncy_ball_run". Error: Unknown column 'asset_flags' in 'field list'

If needed, I can send the entire log for this 2nd attempt, using “root” as the User ID.

After this second attempt with the command screen, which ran to completion, I tried using a viewer (Imprudence) to access the sim. It ran as a standalone and I was able to rez the regions and assets on the regions. But the Avatar never rezed in and the Inventory (which was well over 30,000 items) was at 163 items.

What puzzles me is how well the past updates were for me. Even though I originally followed the steps as directed, the 32BitLauncher just crashed. And by changing the UserID, I could get the command screen to finish, but obviously the Avatar and Inventory were left behind.

I will admit to being as dense as a box of rocks, so please bear with my confusion. Perhaps there is a contact you could refer me to that can give me some personal guidance as to where I have gone wrong. I am in the Laguna Beach area and I am willing to seek additional help either in person or online.

Many Thanks

Mike Joyce
[email protected]

Null file generated within wifi

This comes up during the hourly status report:

2010-08-30 17:10:10,010 DEBUG - Diva.Wifi.WifiUtils [Wifi]: Exception Could not find file "/home/winnie/opensim/diva-r13558/WifiPages/:9000".

Running r-13558, clean install on a new machine, URL should be "mars-simulator.hobby-site.org" and appears consistent in every INI file.

No bad effects noted apart from the log message.

Problem with new robust wifi-0-7-1-a

I am trying to get wifi-0-7-1-a with a new robust installation having failed to get it running on an existing one. I am getting the following error:

[SERVICE BASE]: Failed to load plugin OpenSim.Data.IAssetDataPlugin from Diva.Data.MySQL.dll with args
System.Reflection.ReflectionTypeLoadException: The classes in the module cannot be loaded.
at (wrapper managed-to-native) System.Reflection.Assembly:GetTypes (System.Reflection.Assembly,bool)
at System.Reflection.Assembly.GetTypes () [0x00000] in :0
at OpenSim.Services.Base.ServiceBase.LoadPlugin[IAssetDataPlugin](System.String dllName, System.String className, System.Object[] args) [0x00000] in :0

And many more below that.

This is very similar to the ones I was getting on the other grid. Am I missing something obvious?

TIA

Wifi for opensim 0.7.1.1 standalone

Hi all,

I have Diva.Modules.dll, and all .dll, and:

[opensim@cc bin]$ cat OpenSim.ini
[Startup]
[SMTP]
[Network]
shard = "OpenSim"
[ClientStack.LindenUDP]
[Chat]
[Messaging]
[ODEPhysicsSettings]
[RemoteAdmin]
[Wind]
[LightShare]
[DataSnapshot]
[Economy]
[XEngine]
OSFunctionThreatLevel = VeryLow
[MRM]
[FreeSwitchVoice]
[FreeswitchService]
[Groups]
[InterestManagement]
[MediaOnAPrim]
[Architecture]
Include-Architecture = "config-include/Standalone.ini"

[opensim@cc config-include]$ cat StandaloneCommon.ini
[DatabaseService]
StorageProvider = "Diva.Data.MySQL.dll"
ConnectionString = "Data Source=localhost;Database=opensim;User ID=xxxx;Password=yyyy;"
[AssetService]
DefaultAssetLoader = "OpenSim.Framework.AssetLoader.Filesystem.dll"
AssetLoaderArgs = "assets/AssetSets.xml"
[HGInventoryService]
ProfileServerURI = "http://195.194.82.13:9000/profiles"
[HGAssetService]
ProfileServerURI = "http://195.194.82.13:9000/profiles"
[HGInventoryAccessModule]
ProfileServerURI = "http://195.194.82.13:9000/profiles"
[Modules]
AssetCaching = "CenomeMemoryAssetCache"
Include-CenomeCache = "config-include/CenomeCache.ini"
WifiModule = true
[GridService]
StorageProvider = "Diva.Data.MySQL.dll"
ConnectionString = "Data Source=localhost;Database=opensim;User ID=xxxx;Password=yyyy;"
Region_Welcome_Area = "DefaultRegion, FallbackRegion"
[LibraryModule]
[LoginService]
WelcomeMessage = "Welcome to Bromley College OpenSim Project"
GatekeeperURI = "http://195.194.82.13:9000"
SRV_HomeURI = "http://195.194.82.13:9000"
SRV_InventoryServerURI = "http://195.194.82.13:9000"
SRV_AssetServerURI = "http://195.194.82.13:9000"
SRV_ProfileServerURI = "http://195.194.82.13:9000"
[GatekeeperService]
ExternalName = "http://195.194.82.13:9000"
AllowTeleportsToAnyRegion = true
[GridInfoService]
login = "http://195.194.82.13:9000/"
gridname = "Bromley College Project Sim"
gridnick = "bromproj"
[WifiService]
GridName = "bromproj"
LoginURL = "http://cc.bromley.ac.uk:9000"
WebAddress = "http://cc.bromley.ac.uk:9000"

;; The Wifi Administrator account
AdminFirst = "Estate"
AdminLast = "Manager"
AdminEmail = "[email protected]"

;; Do you want to be able to control grid registrations?
AccountConfirmationRequired = false

;; Default avatars for new account registration
;; Syntax: AvatarAccount_ = " "
;; Appearance and attachments are copied from avatar .
AvatarAccount_Female = "Female Avatar"
AvatarAccount_Male = "Male Avatar"
AvatarAccount_Neutral = "Neutral Avatar"

;; Preselection for default avatar in new account registration
AvatarPreselection = "Neutral"

;; Variables for your mail server
;; Users will get email notifications from this account.
SmtpHost = "localhost"
SmtpPort = "25"
;; SmtpUsername = "[email protected]"
;; SmtpPassword = "password"

;; SmtpHost = "smtp.gmail.com"
;; SmtpPort = "587"
;; SmtpUsername = "[email protected]"
;; SmtpPassword = ""

serves fo 0.7.1 but not serves fo 0.7.1.1

Please help

Tnks

Denial of Service attack

The recursive #Include system cannot handle an estate number larger than about 800 due to the recursion in it, and the 1 MB stack space. The estate number can be almost unlimited in DreamGrid as it can handle thousands of regions. It also starts at 1000 now due to a need to skip over any possible estate. Web crawlers and rogue operators read an unused URL in the Diva code that is not normally used, and it will crash Robust due to the limited stack space of 1 MB.

I added a simple cutoff limit, shown below, which can be much lower than 500. I had to use a high estate number for auto creation of a a specific estate for Endless Land and Seas in DreamGrid. If you need a more details as to exactly what is happening and where, please contact me directly fred at outworldz.com.

Processor.cs line 141:

    private string Include(string argStr)
    {
        if (m_Index > 500) 
            return string.Empty;

enabling lightshare/windlight produces grey clouds

I've tried to get lightshare to work with diva distro and all I get are grey clouds that I can't adjust. I've configured correctly per instructions and use correct viewers but once enabled I'm unable to view/ modify clouds, wind, colors.

Console in wifi page opensim 072 dev

Hi, this is my error:

Received an invalid response from remote console! Please ensure that Robust server and/or OpenSimulator instances are configured correctly.

Where add ConsoleAllowedOrigin in what .ini file?

Tnks

Wifi input fields contents not selected for onclick event

Wifi input fields contents not selected for onclick event. All input fields seem to have this problem. It causes extra mouse clicks and typing to work around.

opensim Wifi not working on Centos 5.5 x86_64

Hi,
I installed Mono 2.10.1 from http://ftp.novell.com/pub/mono/download-stable/RHEL_5/repodata/
then i installed diva-r13981

using the out of the box configs (except for the changes made by running Configure.exe) I cannot seem to get wifi working.
I get the message:

Ooops!
The page you requested has been obsconded with by knomes. Find hippos quick!
If you are trying to log-in, your link parameters should have: "-loginpage http:///?method=login -loginuri http:///" in your link

Also there is no mention of it in the logs. Any ideas? Is there a way to increase the debug/log messages so i migh get a hint as to what is wrong?

[opensim@vhost3 bin]$ mono OpenSim.exe
17:37:07 - [OPENSIM MAIN]: configured log4net using default OpenSim.exe.config
17:37:07 - [OPENSIM MAIN]: Runtime gave us 100 worker threads and 4 IOCP threads
17:37:07 - [OPENSIM MAIN]: Bumping up to 500 worker threads and 1000 IOCP threads
17:37:07 - Performing compatibility checks...
17:37:07 - Environment is compatible.
17:37:07 - [CONFIG]: Reading configuration settings
17:37:07 - [CONFIG]: Reading configuration file /home/opensim/diva-r13981/bin/OpenSim.ini
17:37:07 - [CONFIG]: Reading configuration file /home/opensim/diva-r13981/bin/config-include/DivaPreferences.ini
17:37:07 - [CONFIG]: Reading configuration file /home/opensim/diva-r13981/bin/config-include/MyWorld.ini
17:37:07 - [LOGGING]: Logging started to file /home/opensim/diva-r13981/bin/OpenSim.log
17:37:07 - [OPENSIM MAIN]: Using async_call_method SmartThreadPool
17:37:07 - [STARTUP]: Beginning startup processing
17:37:07 - [STARTUP]: OpenSimulator version: OpenSim 0.7.0.2 Post_Fixes
17:37:07 - [STARTUP]: Operating system version: Unix 2.6.24.25
17:37:07 - ====================================================================
17:37:07 - ========================= STARTING OPENSIM =========================
17:37:07 - ====================================================================
17:37:07 - [OPENSIM MAIN]: Running
17:37:07 - [DATASTORE]: Attempting to load OpenSim.Data.MySQL.dll
17:37:07 - [REGION DB]: MySql - connecting: Data Source=localhost;Database=opensim;User ID=opensim;Password=***;
17:37:07 - [REGION DB]: Connection wait timeout 28860 seconds
17:37:07 - [MIGRATIONS]: EstateStore up to date, no migrations to apply
17:37:07 - [MIGRATIONS]: RegionStore up to date, no migrations to apply
17:37:07 - [DATASTORE]: Added IRegionDataStore Interface
17:37:07 - [CLIENTSTACK]: Attempting to load OpenSim.Region.ClientStack.LindenUDP.dll
17:37:07 - [CLIENTSTACK]: Added IClientNetworkServer Interface
17:37:07 - [REGION SERVER]: Starting HTTP server on port 9000
Console log level is ALL
17:37:07 - [PLUGINS]: Initializing addin manager
17:37:07 - [PLUGINS]: Loading extension point /OpenSim/Startup
17:37:07 - [!]:STARTUP COMPLETE
Currently selected region is root
17:37:07 - [STARTUP]: Startup took 0m 0s
Region (root) #

here's my [obsvicated] MyWorld.ini file, other ini's are as distributed/created by Configure.exe:

[Startup]
    ; ### Set the password
    storage_connection_string="Data Source=localhost;Database=opensim;User ID=opensim;Password=*****;"

    ; SmartThreadPool is reported to work well on Mono/Linux, but
    ; UnsafeQueueUserWorkItem has been benchmarked with better
    ; performance on .NET/Windows
    async_call_method = SmartThreadPool
    ; recommended: false for mono / true for Windows
    use_async_when_possible = false

[DatabaseService]
    ; ### Set the password (again)
    ConnectionString = "Data Source=localhost;Database=opensim;User ID=opensim;Password=*****;"

[Network]
    http_listener_port = 9000

[GridService]
    Region_OldClumbuktor_1 = "DefaultRegion, FallbackRegion"

[DataSnapshot]
    gridname = "OldClumbuktor"

[LoginService]
    WelcomeMessage = "Welcome to OldClumbuktor!"

    HomeURI = "http://opensim1.ateb.co.uk:9000"
    GatekeeperURI = "http://opensim1.ateb.co.uk:9000"
    InventoryServerURI = "http://opensim1.ateb.co.uk:9000"
    AssetServerURI = "http://opensim1.ateb.co.uk:9000"

[GatekeeperService]
    ExternalName = "http://opensim1.ateb.co.uk:9000"

[GridInfoService]
    login = http://opensim1.ateb.co.uk:9000/
    gridname = "OldClumbuktor"
    gridnick = "oldclumbuktor"
    welcome = http://opensim1.ateb.co.uk:9000/wifi/welcome.html
    register = http://opensim1.ateb.co.uk:9000/wifi/user/account
    password = http://opensim1.ateb.co.uk:9000/wifi/forgotpassword

[WifiService]
    GridName = "OldClumbuktor"
    LoginURL = "http://opensim1.ateb.co.uk:9000"
    WebAddress = "http://opensim1.ateb.co.uk:9000"

    ;; The Wifi Administrator account
    AdminFirst = "Wifi"
    AdminLast = "Administrator"
    AdminEmail = "****@ateb.co.uk"
    AdminPassword = "***"

    ;; Do you want to be able to control grid registrations?
    AccountConfirmationRequired = true

    ;; Variables for your mail server
    ;; Users will get email notifications from this account.
    SmtpHost = "localhost"
    SmtpPort = "25"
    SmtpUsername = "Wifi"
    SmtpPassword = "***"

kind regards
Simon

loading iar file issue

i am trying to load the asset file "Objects_Library__large_.iar" using a cmd like

$ load iar <inventory path???> /Objects_Library__large_.iar

however, i don't know how to specify "inventory path", tried several different versions:
"My Inventory"
"Objects"
"/Objects"

none of these work (with or without apostrophes) though the folders obviously do exist...help?

Wifi admin user not loggin

Hi i have gird opensim 0.7.6, install wifi-0-7-6.zip, i can create new users, but i can login with my admin user:

AdminFirst = "felipe"
AdminLast = "urrego"

and create pwd in localhost:8002/wifi/install

Please tell me how to do

Tnks

Duplicate agent name

I had a brain fart when answering the question asking for the name of the Estate Owner and entered my name. Now I get this error:
18:31:53 - [GRID SERVICE]: Region Monerda 1 tried to register duplicate name with ID b432ae32-d6d9-42bf-ab8b-7bb39da17848.
18:31:53 - [STARTUP]: Registration of region with grid failed, aborting startup - at OpenSim.Region.Framework.Scenes.Scene.RegisterRegionWithGrid () [0x00000]
at OpenSim.OpenSimBase.CreateRegion (OpenSim.Framework.RegionInfo regionInfo, Boolean portadd_flag, Boolean do_post_init, IScene& mscene) [0x00000]

Is there any way to fix this?

Thanks

Improve email sending

I just improved the email sending, because the login user from smtp was different from the email used on "from" field.

OliveiraLands/opensimulator@a75e12c

Can't make wifi-09000.zip work! (Ubuntu 15, HyperGrid, robust).

drag of objects from clothing library only possible once per server run

I can drag a folder from the opensim clothing library that is installed with the diva distribution on my avatar to get that outfit copied to my inventory. But after I did that, the dragging doesn't work anymore for that avatar or for any other avatar until I restart the server, then I can again drag an outfit just once. Only noticed it because I decided today to set up the default avatars and it got a bit cumbersome due to this bug ;)

Might be a problem with opensim itself, though, can't say if it is specific to the diva distribution library.

Wifi add-on with opensim 0.7.4

Hi,

I've add the Wifi addon on a existing 0.7.4 Opensim's installation. It seem's to run, but when I try to manage the users, i've got this message on the Robust console
[DivaData]: Invalid cast for UserAccount store. Diva.Data required for method GetActiveAccounts.

On the web interface I get a "No users found"

Any idea whats going wrong with my installation

Thanks for your help

Philippe

wifi email issue

i'm almost reluctant to ask this simple question here, but...well. in the WIFI.txt file, you explain that" Wifi sends mail via Gmail's SMTP secure server." - i run a ubuntu 10.04 server from home on a pc that sits on a lan. all is good with OpenSim including access from the internet. but i don't know what is the minimal setup to get Wifi to send email (apart from the certificate imports which i did).

thanks very much! great distro! love it! /marcus

can connect via internet but not via LAN anymore...

odd.

i'm running diva on an ubuntu 10.04 server which sits on a pc in my LAN configured with a static IP. all opensim access from outside (via dyndns.org hostname) works well. also, http://static_ip:9010/wifi works, but using this URI as LOGINURI for any viewer doesnt work. i get this error.

Connection request for client 3e0f4d6f-4fc8-4bcd-bd81-ed3e1fc192a3 connecting with unnotified circuit code 1942658104 from 192.168.178.21:54232

where 192.168.178.21 is the client computer on which i'm trying to open OpenSim (not the same as the server). any idea? could not find this on OSGrid forum...must be a simple thing. thanks again!

using 0.7.6 post fixed

ok i was setting up wifi to my grid i see this
10:52:04 - [Wifi]: Loading addon Diva.GridUserManagement.dll
10:52:04 - [SERVER UTILS]: Error loading plugin from Diva.GridUserManagement.dll
System.IO.FileNotFoundException: Could not load file or assembly 'Diva.GridUserM
anagement.dll' or one of its dependencies. The system cannot find the file speci
fied.
File name: 'Diva.GridUserManagement.dll'
at (wrapper managed-to-native) System.Reflection.Assembly:LoadFrom (string,boo
l)
at System.Reflection.Assembly.LoadFrom (System.String assemblyFile) [0x00000]
in :0
at OpenSim.Server.Base.ServerUtils.LoadPlugin[IWifiAddon](System.String dllNa
me, System.String className, System.Object[] args) [0x00010] in /home/andsim/ope
nsim/opensim-0.7.6PF-source/OpenSim/Server/Base/ServerUtils.cs:259
10:52:04 - [Wifi]: Unable to load addon Diva.GridUserManagement.dll
then i am seeing this when i was trying get user info or user
10:52:51 - [DivaData]: Invalid cast for GridUser store. Diva.Data required for method .ctor.

11:06:31 - [DivaData]: Invalid cast for GridUser store. Diva.Data required for method GetOnlineUserCount.
11:06:31 - [DivaData]: Invalid cast for UserAccount store. Diva.Data required for method GetActiveAccountsCount.
11:06:31 - [DivaData]: Invalid cast for GridUser store. Diva.Data required for method GetActiveUserCount.
11:06:31 - [Wifi]: DefaultRequest
11:06:31 - [Wifi]: User is not present in the grid
11:06:32 - [DivaData]: Invalid cast for GridUser store. Diva.Data required for method GetOnlineUserCount.

Typo in DivaPreferences.ini

Line 74 currently reads

Allow_osAvatarStopSnimation = ESTATE_OWNER

should read

Allow_osAvatarStopAnimation = ESTATE_OWNER

Issues with Hollowing out Prims?!

I am using xUbuntu 14.04 and mono. I have everything running, I am connecting fine from work [gotta love VPNs and VNC; play all day :-)]. Anyways, I am running newest stable 0.7.6 Diva Ditsro, I connected with Imprudence and working with Prims seemed fine I was able to texture and what not,but if I try to hollow or do any form of cut away on any prim either solo or in a group I see the box expand or the indicator move across the object and the client shows measurement change in text fields, BUT NO hollow space or doorways are being created.

Now interesting I used the newest SimOnAStick on my local work machine yesterday same Impudence client and I was hollowing walls, and cutting away door ways with no issues, and I swore it stated it is using the Divo Distro when I extracted it's files. It is only when I installed it in xUbuntu 14.04 that this happened, and I do not see any errors on the console [I am VERY good at computers I have grown up fixing them and using Linux all my life, but I am new to using OpenSIM [I never knew they had Open Source Second Life clone :-D [You like Minecraft? This is freaking Mine Craft on steroids! I am thinking of creating an interactive game as I was creating a MUD, but with OpenSIM I see the possibilities for a fully interactive 3D World game :-D.

OpenSim 0.9.1.0 uses .NET Framework 4.6

Note that for Diva Wifi, as planned by Diva, the current code (as at 13-Dec-2018) works with the latest STABLE release of Opensim. Currently this is 0.9.0.1 and is based on .NET Framework 4.0. The latest dev master and hence the next release will be 0.9.1.0 and uses .NET Framework 4.6. I can confirm that Wifi works fine with 0.9.1.0 dev master at present so long as all prebuild[.].xml files are amended to say Framework 4_6 rather than Framework 4_0. The XML files are in each addon-modules/ folder. Watch out for the THREE .xml files in addon-modules/00Data/ all of which need to be amended.

BUT... check first if the code has been updated, especially when a new stable release of OpenSim comes out.

Note that for adding in Wifi capabilities to OpenSim you don't need the addon-modules for 02AddinExample, OnLookSupport and ProcessorTest.

I provided some notes on setting up Wifi for Windows users in case you get stuck... http://blog.inf.ed.ac.uk/atate/2018/12/12/diva-wifi/

Wifi in Standalone 0.7.3.1 problem

Hi
I did the installation following these instructions http://opensimulator.org/wiki/Wifi, i used the files from diva-r18611.zip archive and when i am trying to open the web page i get this error:
Missing field DirectorySeparatorChars in class Diva.Utils.WebAppUtils (type token 16777281)
22:43:03 - [BASE HTTP SERVER]: HandleRequest() threw

thanks in advance

wifi user management question: level/flag/title?

what are "level", "flag" and "title" for? the values are

level 0
flag 0
title local user

for me. does this have to do with HG jumping? (which i also cannot do - at least simply entering the address - as via hyperica list - of another sim does not get me there...) - "server commands" list on opensimulator.org did not really help either - explanation there is too terse for my taste.

thanks!